2. CON-SERV
  3. SD 032 SC Grab Rail Shower Soap Dish

CON-SERV SD 032 SC Grab Rail Shower Soap Dish, CON-SERV SD 032 SC Grab Rail Shower Soap Dish User manual

  • Hello! I've reviewed the provided installation instructions for the CON-SERV SD 032 Soap Dish Holder. This document outlines the process of assembling the device, including separating the components and affixing it to the grab rail. I'm ready to answer your questions about it.
  • What are the components of the Glide Slide Soap Dish Holder?
    What is the first step in installation?
    What should you do after placing the ABS Glide Body over the grab rail?
    What does the instructions say about tightening the Lock Nut?
GRAB RAIL
ABS GLIDE
BODY
LOCK NUT
BODY
SPACER
LOCK NUT
BODY
SPACER
ABS GLIDE
BODY
SD 032 Mii H076 R0
1 2
SD 032 Installation Instructions
INSTALLATION INSTRUCTIONS
3 4
Separate the 3 components of the Glide
Slide Soap Dish Holder ready for
installation.
Screw the Lock Nut onto the ABS Glide
Body. Do not overtighten.
Move the Soap Dish Holder into the
desired postion.
Place the ABS Glide Body over the grab
rail. Insert the spring loaded Body Spacer
into the ABS Glide Body.
GRAB RAIL
ABS GLIDE
BODY
LOCK NUT
GRAB RAIL
ABS GLIDE
BODY
LOCK NUT
BODY
SPACER
LOCK NUT
BODY
SPACER
ABS GLIDE
BODY
SD 032 Mii H076 R0
1 2
SD 032 Installation Instructions
INSTALLATION INSTRUCTIONS
3 4
Separate the 3 components of the Glide
Slide Soap Dish Holder ready for
installation.
Screw the Lock Nut onto the ABS Glide
Body. Do not overtighten.
Move the Soap Dish Holder into the
desired postion.
Place the ABS Glide Body over the grab
rail. Insert the spring loaded Body Spacer
into the ABS Glide Body.
GRAB RAIL
ABS GLIDE
BODY
LOCK NUT
GRAB RAIL
ABS GLIDE
BODY
LOCK NUT
BODY
SPACER
LOCK NUT
BODY
SPACER
ABS GLIDE
BODY
SD 032 Mii H076 R0
1 2
SD 032 Installation Instructions
INSTALLATION INSTRUCTIONS
3 4
Separate the 3 components of the Glide
Slide Soap Dish Holder ready for
installation.
Screw the Lock Nut onto the ABS Glide
Body. Do not overtighten.
Move the Soap Dish Holder into the
desired postion.
Place the ABS Glide Body over the grab
rail. Insert the spring loaded Body Spacer
into the ABS Glide Body.
GRAB RAIL
ABS GLIDE
BODY
LOCK NUT
/