WATER PUMPS LC-EG-01 User manual

AN INSTRUCTION MANUAL

1、Product parameters

1）. Approved voltage:dc-5v

2）. Power:4W

2、Installation instruetons

1). connect the slicone hoseto the bottom of the machine body,insert the water pipe into the

barreled water, and put the card seat at the bottom of the product on the bucket.

2). Please install the stainless steel pipe to the water outiet of the fuselage in arotating way (this

operation is not required for integrated models).

3、Operating instructions

Key version: press the start button to work normally, and then press the start key to stop working.

intelligent version:1. Press the power on button, the "water out" indicator light will be on for a

long time, and the product will work normally continuously, and then press the start button to

stop working

4、Charging instructions According to the approved charging voltage dc-5v(current 1a), the

Android charger charges for about 3 hours. When the indicator lightis on for a long time or the

green light and light are off. the charging power cord can work normally.

5、Cleaning and maintenance

1).It is forbidden to wash the

product with water or soak it in water, but wipe it with soft cloth

2).It is strictly forbidden to pump hot water, alcohol and othercorrosive liquids.

3).If the product is not used for a long time, please clean it and place it in a ventilated and dry

place.

The company has the right to final interpretation of the manual,if there is any change without

notice.

Warm tips:

1.Itis forbidden to use the charger

whose current exceeds 1a (fast charging charger is prohibited)

2.It is forbidden to have charging state for along time

3. It is forbidden to wash the body of the product

4.It is strictly for bidden to pump hot water. alcohol oil and othercorrosive liquids,