EGO LB7650E Owner's manual

OPERATOR'S MANUAL

56 VOLT LITHIUM-ION

CORDLESS BLOWER

MODEL NUMBER LB7650E

WARNING: To reduce the risk of injury, the user must read and understand the

Operator’s Manual before using this product. Save these instructions for future reference.

MNL_EGO_LB7650E_AV01.01_220419

10. Tube-Release Button 6. Electric Contacts

5. Latch

4. Battery-Release Button

1. Speed/Lock-on Dial

14. Shoulder Strap 2. Boost Button

7. Ejection Mechanism

3. Air-Speed Trigger

8. Air Intake

9. Base

11. Blower Tube

12. Tapered Nozzle

13. Spread Nozzle

D E

Battery-Release

Button

Speed/Lock-on Dial Boost Button

Air-speed Trigger

Battery Rib

Mounting Slot

56 VOLT LITHIUM-ION CORDLESS BLOWER — LB7650E4

READ ALL INSTRUCTIONS!

READ OPERATOR’S MANUAL

NOTICE: These instructions shall also be available in an

alternative format, e.g. on a website.

WARNING: To ensure safety and reliability, all repairs

and replacements should be performed by a qualiﬁed

service technician.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to

possible dangers. The safety symbols and the explanations

with them deserve your careful attention and understanding.

The symbol warnings do not, by themselves, eliminate any

danger. The instructions and warnings they give are no

substitutes for proper accident prevention measures.

WARNING: Be sure to read and understand all

safety instructions in this Operator’s Manual, including all

safety alert symbols such as “DANGER,” “WARNING,” and

“CAUTION” before using this tool. Failure to following all

instructions listed below may result in electric shock, ﬁre,

and/or serious personal injury.

DAMAGE PREVENTION AND INFORMATION MESSAGES

These inform the user of important information and/or

instructions that could lead to equipment or other property

damage if they are not followed. Each message is preced-

ed by the word “NOTICE”, as in the example below:

NOTICE: Equipment and/or property damage may

result if these instructions are not followed.

WARNING: The operation of any

power tools can result in foreign

objects being thrown into your eyes,

which can result in severe eye

damage. Before beginning power tool

operation, always wear safety

goggles or safety glasses with side

shields and a full face shield when

needed. We recommend a Wide

Vision Safety Mask for use over

eyeglasses or standard safety glasses

with side shields.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may

appear on this product. Read, understand, and follow all

instructions on the machine before attempting to assem-

ble and operate it.

Safety Alert Precautions that involve your

safety.

Wear Eye

Protection

Always wear safety goggles

or safety glasses with side

shields and a full face shield

when operating this product.

Wear Ear

Protection

Always wear ear protection

when operating this product.

Read

Operator’s

Manual

To reduce the risk of injury,

user must read operator’s

manual before using this

product.

Keep

Bystanders

Away

Keep all bystanders at least

15m away.

Do Not Expose

To Moisture

Do not use in the rain or

leave outdoors while it is

raining.

Noise Sound pressure level

Direct Current Type or a characteristic of

current

IPX4

Ingress

Protection

Degree

Protection from splashing

water

m3/h Cubic Meter

Per Hour Air volume

m/s Meter Per

Second Air velocity

kg Kilogram Weight

V Volt Voltage

min Minutes Time

N Newton Blowing force

When using an electrical appliance, basic precautions

should always be followed, including the following:

56 VOLT LITHIUM-ION CORDLESS BLOWER — LB7650E 5

GENERAL POWER TOOL SAFETY WARNINGS

WARNING: READ ALL SAFETY WARNINGS,

INSTRUCTIONS, ILLUSTRATIONS AND

SPECIFICATIONS PROVIDED WITH THIS POWER

TOOL. Failure to follow all instructions listed below may

result in electric shock, ﬁre and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE

REFERENCE.

The term “power tool” in the warnings refers to your

mains- operated (corded) power tool or battery-operated

(cordless) power tool.

WORK AREA SAFETY

◾Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

◾Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

◾Keep children and bystanders away while

operating a power tool. Distractions can cause you

to lose control.

ELECTRICAL SAFETY

◾Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodiﬁed plugs and matching outlets will reduce risk

of electric shock.

◾Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

◾Do not expose power tools to rain or wet

conditions. Water entering a power tool will increase

the risk of electric shock.

◾Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

◾When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

◾If operating a power tool in a damp location is

unavoidable, use a Ground-fault circuit interrupter

protected supply. Use of GFCI reduces the risk of

electric shock.

PERSONAL SAFETY

◾Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inﬂuence of drugs, alcohol medication. A

moment of inattention while operating power tools may

result in serious personal injury.

◾Use personal protective equipment. Always wear

eye protection. Protective equipment such as a dust

mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce

personal injuries.

◾Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your ﬁnger on the

switch or energizing power tools that have the switch

on invites accidents.

◾Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

◾Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

◾Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing away from moving

parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

◾If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust

devices can reduce dust-related hazards.

◾Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury with a fraction of a second.

POWER TOOL USE AND CARE

◾Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the job

better and safer at the rate for which it was designed.

◾Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

◾Disconnect the plug from the power source and/

or the battery pack from the power tool before

making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

56 VOLT LITHIUM-ION CORDLESS BLOWER — LB7650E6

◾Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands of

untrained users.

◾Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect

the power tools operation. If damaged, have the

power tool repaired before use. Many accidents are

caused by poorly maintained power tools.

◾Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

◾Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

◾Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

◾Recharge only with the charger speciﬁed by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of ﬁre when used

with another battery pack.

◾Use power tools only with speciﬁcally designated

battery packs. Use of any other battery packs may

create a risk of injury and ﬁre.

◾When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a ﬁre.

◾Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, ﬂush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

◾Do not use a battery pack or tool that is damaged

or modiﬁed. Damaged or modiﬁed batteries may

exhibit unpredictable behavior resulting in ﬁre,

explosion or risk of injury.

◾Do not expose a battery pack or tool to ﬁre

or excessive temperature. Exposure to ﬁre or

temperature above 130°C may cause explosion.

◾Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range speciﬁed in the instructions. Charging

improperly or at temperatures outside the speciﬁed

range may damage the battery and increase the risk

of ﬁre.

SERVICE

◾Have your power tool serviced by a qualiﬁed repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

◾Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

READ ALL INSTRUCTIONS BEFORE USING THIS

PRODUCT!

TRAINING

◾Never allow children, persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge or people unfamiliar with these

instructions to use the machine.

◾The operator or user is responsible for accidents or

hazards occurring to other people or their property.

PREPARATION

◾The power tool may be used in the rain or wet

conditions. Dry the power tool after ﬁnishing work.

◾Before using, check the batteries or battery packs for

damage. Do not use the appliance if the batteries or

battery pack is damaged.

OPERATION

◾The power tool may be used in the rain or wet

conditions. Dry the power tool after ﬁnishing work.

◾Disconnect the batteries or battery packs:

1. Whenever you leave the machine;

2. Before clearing a blockage;

3. Before checking, cleaning or working on the

appliance;

4. If the appliance starts to vibrate abnormally.

◾Always be sure of your footing on slopes.

◾Walk, never run.

◾Keep all cooling air inlets clear of debris.

56 VOLT LITHIUM-ION CORDLESS BLOWER — LB7650E 7

◾Recommendation to operate the machine only at

reasonable hours – not early in the morning or late at

night when people might be disturbed.

◾Recommendation to slightly dampen surfaces in dusty

conditions or use mister attachment.

WARNING: Danger of rotating parts!

◾Use the full blower nozzle extension so the air stream

can work close to the ground.

◾Not to operate the machine near open windows, etc.

MAINTENANCE AND STORAGE

◾Keep all nuts, bolts and screws tight to be sure the

appliance is in safe working condition.

◾Replace worn or damaged parts.

◾Use only genuine replacement parts and accessories.

◾Store the appliance only in a dry place.

WARNING: To reduce risk of ﬁre, electric shock, or

injury:

IMPORTANT

READ CAREFULLY BEFORE USE.

KEEP FOR FUTURE REFERENCE.

◾Do not allow the blower to be used as a toy. Close

attention is necessary when used by or near children.

◾If the blower is not working as it should, has been

dropped, damaged, or dropped into water, return it to

a service center.

◾Do not put any object into any openings. Do not use

with any opening blocked; keep openings free of dust,

lint, hair, and anything that may reduce air ﬂow.

◾Use extra care when cleaning on stairs.

◾Do not leave blower unattended when the battery Plug

is inserted. Remove the battery when the blower is not

in use and before servicing.

◾Do not handle the charger, including charger plug, or

charger terminals with wet hands.

◾Do not charge the battery pack outdoors.

◾Use only with battery packs and chargers listed below.

BATTERY PACK CHARGER

BA1400, BA2800, BA4200,

BA1400T, BA2800T, BA4200T,

BA5600T, BA6720T

CH2100E,

CH5500E,

CH7000E

WARNING:

- The battery pack must be removed from the appliance

before it is scrapped.

- The battery shall be disposed of safely.

◾DO NOT attempt to clear clogs from the unit without

ﬁrst removing the battery.

◾Keep the blower and its handle dry, clean and free

from oil and grease. Always use a clean cloth when

cleaning. Never use brake ﬂuids, gasoline, petroleum

based products, or any strong solvents to clean your

blower. Following this rule will reduce the risk of loss

of control and deterioration of the enclosure plastic.

◾Batteries can explode in the presence of a source

of ignition, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product

in the presence of an open ﬂame. An exploded battery

can propel debris and chemicals. If exposed, ﬂush with

water immediately.

◾Never run the unit without the proper equipment

attached. Always ensure that the blower tube is

installed.

◾Never use the blower near ﬁres or hot ashes. Use

near ﬁres or ashes can spread ﬁres and result in

serious injury and/or property damage.

◾Never use blower to spread chemicals, fertilizers,

or any other toxic substances. Spreading these

substances could result in serious injury to the

operator or bystanders.

◾Save these instructions. Refer to them frequently

and use them to instruct others who may use this tool.

If you loan this tool to someone else, also loan these

instructions to them to prevent misuse of the product

and possible injury.

SAVE THESE INSTRUCTIONS!

56 VOLT LITHIUM-ION CORDLESS BLOWER — LB7650E8

SPECIFICATIONS

Voltage 56V

Maximum Air Volume at

Nozzle

1300 m3/h

Maximum Air Velocity

74 m/s (without

tapered nozzle)

87 m/s (with tapered

nozzle)

Maximum Blowing Force 26 N

Approximate Run Time (with

EGO BA2800T 56V Battery

5.0Ah)

150 min (Low speed)

25 min (High speed)

15 min (Boost mode)

Recommended Operating

Temperature -15°C - 40°C

Recommended Storage

Temperature -20°C - 70°C

Weight 2.1 kg

PACKING LIST

PART NAME QUANTITY

Blower 1

Shoulder strap 1

Nozzle attachment 2

Blower tube 1

Operator’s manual 1

DESCRIPTION

KNOW YOUR BLOWER (Fig. A)

1. Speed/Lock-On Dial

2. Boost Button

3. Air-Speed Trigger

4. Battery-Release Button

5. Latch

6. Electric Contacts

7. Ejection Mechanism

8. Air Intake

9. Base

10. Tube-Release Button

11. Blower Tube

12. Tapered Nozzle

13. Spread Nozzle

14. Shoulder Strap

WARNING: The safe use of this product requires

an understanding of the information on the tool and

in this instruction manual as well as knowledge of the

project you are attempting. Before use of this product,

familiarize yourself with all operating features and

safety rules.

ASSEMBLY

WARNING: If any parts are damaged or missing,

do not operate this product until the parts are replaced.

Use of this product with damaged or missing parts

could result in serious personal injury.

WARNING: Do not attempt to modify this product

or create accessories not recommended for use with

this blower. Any such alteration or modification is

misuse and could result in a hazardous condition

leading to possible serious personal injury.

WARNING: To prevent accidental starting that

could cause serious personal injury, always remove the

battery pack from the tool when assembling parts.

APPLICATION

You may use this product for the purposes listed below:

◾Clearing hard surfaces such as driveways and

walkways.

◾Keeping decks and driveways free from leaves and

pine needles.

NOTICE: The tool is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse.

ASSEMBLING/REMOVING THE BLOWER TUBE

◾To Assemble (Fig. B & C)

Align the groove and push the tube onto the blower

housing until you hear a “click”.

◾To Remove (Fig. D)

Press the tube-release button and remove the tube.

56 VOLT LITHIUM-ION CORDLESS BLOWER — LB7650E 9

ASSEMBLING/REMOVING THE BLOWER TAPERED/

SPREAD NOZZLE

◾To Assemble(Fig. E & F)

Align the groove in the tapered nozzle with the tube

knob and push the nozzle onto the tube until it snaps

into place.

◾To Remove(Fig. G)

Press and hold the nozzle-release button to disengage the

latch, then pull the nozzle straight from the blower tube.

Follow the same sequence to assemble or remove the

spread nozzle.

ASSEMBLING THE SHOULDER STRAP (FIG. H)

Depress the strap hook to open it, remove the loop

and attach it onto shoulder-strap mount hanger on the

blower.

OPERATION

WARNING: Before each use, inspect the entire

product for damaged, missing, or loose parts,

such as screws, nuts, bolts, caps, etc. Tighten

securely all fasteners and caps and do not operate

this product until all missing or damaged parts are

replaced.

INSTALLING/REMOVING THE BATTERY PACK

Charge before ﬁrst use.

◾To Install (Fig. I)

Align the battery ribs with the mounting slots and press

the battery pack down until you hear a “click”.

◾To Remove (Fig. J)

Depress the battery-release button and pull the battery

pack out.

WARNING: Always take care to note the location

of your feet, children, or pets when pressing the

battery-release button. Serious injury could result

if the battery pack falls. NEVER remove the battery

pack when in a high location.

STARTING/STOPPING THE BLOWER (FIG. K)

Air-speed trigger only

1. Depress the air-speed trigger to turn on the blower.

2. The air speed of the blower is controlled with the

variable speed trigger. More pressure on the trigger

results in higher blowing speeds; less pressure on

the trigger results in lower blowing speeds. Adjust

the speed to suit the task at hand.

3. Release the air-speed trigger to turn off the blower.

Speed/Lock-on dial only

The blower can be locked at any speed with the speed

lock-on dial.

1. Turn the speed/lock-on dial clockwise to start the

blower. The air speed will increase as the dial is

rotated clockwise.

2. To decrease the air speed, turn the speed/lock-on

dial counterclockwise.

3. Keep turning the speed/lock-on dial counterclockwise

to the off position to stop the blower.

NOTICE: If the speed/lock-on dial is not turned back to

the off position before the battery is removed, the blower

will not start when a fully charged battery is installed. This

is a protection feature to help prevent accidental startup.

Depress the air-speed trigger to deactivate the protection

and start the blower.

Boost mode

Press the boost button while working to temporarily

increase the air speed to the maximum level. The

blower will resume the previous speed when the boost

button is released.

TIPS FOR USING THE BLOWER

◾To keep from scattering debris, blow around the outer

edges of a debris pile. Never blow directly into the

center of a pile.

◾To reduce sound levels, limit the number of pieces of

power equipment used at any one time.

◾Use rakes and brooms to loosen debris before blowing.

In dusty conditions, slightly dampen surfaces if water

is available.

◾Conserve water by using power blowers instead

of hoses for many lawn and garden applications,

including areas such as gutters, screens, patios, grills,

porches, and gardens.

◾The edge of the tapered nozzle helps with removing

wet leaves and clean out gaps in the sidewalk.

◾Watch out for children, pets, open windows, or freshly

washed cars, and blow debris safely away.

◾After using blowers or other equipment, clean up!

Dispose of debris properly.

56 VOLT LITHIUM-ION CORDLESS BLOWER — LB7650E10

MAINTENANCE

WARNING: When servicing, use only identical

replacement parts. Use of any other parts may create a

hazard or cause product damage. To ensure safety and

reliability, all repairs should be performed by a qualified

service technician.

WARNING: To avoid serious personal injury,

always remove the battery pack from the product when

cleaning or performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use.

Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING: Do not at any time let brake fluids,

petrol, petroleum-based products, penetrating oils,

etc., come in contact with plastic parts. Chemicals can

damage, weaken or destroy plastic which may result in

serious personal injury.

STORAGE

◾Remove the battery pack from the blower.

◾Clean all foreign material from the air inlets of the

blower.

◾Store indoors in a place that is inaccessible to children.

Keep away from corrosive agents, such as garden

chemicals and de-icing salts.

Protecting the environment

Do not dispose of electrical appliances as

unsorted municipal waste, use separate

collection facilities.

Contact your local government for infor-

mation regarding the collection systems

available.

If electrical appliances are disposed of in

landﬁlls or dumps, hazardous substances

can leak into the groundwater and get into

the food chain, damaging your health and

well-being.

56 VOLT LITHIUM-ION CORDLESS BLOWER — LB7650E 11

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

Blower doesn’t work.

◾The battery pack is not attached

to the blower.

◾Attach the battery pack to the blower.

◾No electrical contact between the

blower and battery pack.

◾Remove battery, check contacts and

reinstall the battery pack.

◾The battery pack is depleted. ◾Charge the battery pack.

◾The battery pack or blower is

too hot.

◾Cool the battery pack and blower until the

temperature drops below 67°C.

◾The speed/lock-on dial was not

turned back to the off position

before the battery was removed.

◾Depress the air-speed trigger to

deactivate the protection and start the

blower.

The air velocity

decreases signiﬁcantly.

◾Excessive wearing of motor fan. ◾Contact EGO service center for repair.

◾The air inlet is blocked by debris. ◾Remove the battery pack, clear the

debris.

56 VOLT LITHIUM-ION CORDLESS BLOWER — LB7650E12

WARRANTY

EGO WARRANTY POLICY

5 year warranty on EGO outdoor power equipment and 3 year warranty on EGO Power+ System battery packs and

chargers.

Please contact EGO Customer Service on Australia 1300 000 EGO(1300 000 346),

New Zealand 0508 000 EGO (0508 000 346) any time you have questions or warranty claims.

LIMITED SERVICE WARRANTY

FOR FIVE YEARS from the date of original retail purchase, this EGO product is warranted against defects in material or

workmanship. Defective product will receive free repair.

FOR THREE YEARS from the date of original retail purchase, the EGO Power+ System battery pack and charger are

warranted against defects in material or workmanship. Defective product will receive free repair.

This warranty does not cover routine maintenance parts and consumables that can wear out from normal use within the

warranty period.

◾This warranty applies only to the original purchaser from an authorised EGO retailer and may not be transferred.

◾The warranty period for any EGO product or part used for industrial, professional or commercial purpose is one year.

◾This warranty is void if the product has been used for rental purpose.

◾This warranty does not cover the damage resulting from modiﬁcation, alteration or unauthorised repair.

◾This warranty only covers defects arising under normal usage and does not cover any malfunction, failure or defect

resulting from misuse, abuse (including overloading of the product beyond capacity and immersion in water or other

liquid), accidents, neglect or lack of proper installation, and improper maintenance or storage.

◾This warranty does not cover normal deterioration of the exterior ﬁnish, including but not limited to scratches, dents,

paint chips, or to any corrosion or discoloring by heat, abrasive and chemical cleaners.

HOW TO OBTAIN SERVICE

For warranty service, please contact EGO customer service on Australia 1300 000 EGO(1300 000 346 ).

New Zealand 0508 000 EGO (0508 000 346).When requesting warranty service, you must present the original dated

sales receipt. An authorised service center will be selected to repair the product according to the stated warranty terms.

ADDITIONAL LIMITATIONS

Chervon Australia Pty Ltd ABN 36 165 077 501(“Chervon”) warrants to the original domestic purchaser that this product

will be free from defects in materials and workmanship for 5 years from date of purchase, and any battery or charger

will be free from defects in materials and workmanship for 3 years from date of purchase. To make a claim, return

the faulty item together with proof of purchase directly to your closest serveeice agent or to the place of purchase.

Any handling and transportation costs (and other expenses incurred in claiming this warranty) are not covered by this

warranty and will not be borne by Chervon. The replacement product or part or repaired product will be made available

for your collection at an address nominated by Chervon. Where a valid warranty claim is made, Chervon will replace the

defective product or repair the fault. Where the product is repaired, Chervon may use refurbished parts. This warranty

does not cover normal wear and tear, misuse or abuse. This warranty may also be further limited or voided as

speciﬁcally detailed in the product Manual. Chervon has no other liability under this warranty.The beneﬁts to you given

by this warranty are in addition to other rights and remedies imposed by State and Federal legislation that cannot be

excluded. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are

entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or

damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure. Chervon Australia Pty Ltd, Unit 14, 5 Kelletts Road, Rowville, VIC 3178.

Phone Number: Australia 1300 000 EGO(1300 000 346), New Zealand 0508 000 EGO (0508 000 346).

Email address: [email protected].

EGO LB7650E Owner's manual

Related papers

Other documents