Page 2 For technical questions, please call 1-888-866-5797. 63615
Specifications
Batteries (3) 3V CR2032 batteries (included)
Accuracy +/- 0.3°
Important Safety Information
1. Use as intended only.
2. Maintain a safe working environment.
Keep work area clean and well lit. Make
sure there is adequate surrounding
workspace. Do not use this product
in a damp or wet location.
3. Keep bystanders out of the area.
4. Inspect before every use; do not use
if parts are loose or damaged.
5. The Digital Angle Gauge is a precision
measuring instrument. Do not drop
or handle roughly. Do not use when
tired or when under the influence
of alcohol, drugs or medication.
6. People with pacemakers should
consult their physician(s) before use.
Electromagnetic fields in close proximity to
heart pacemaker could cause pacemaker
interference or pacemaker failure.
7. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Button/Coin Battery Warnings
WARNING
This product contains a
button cell or coin battery.
This symbol means:
INGESTION HAZARD: This product
contains a button cell or coin battery.
1. Immediately dispose of used batteries
and keep away from children. Do NOT
dispose of batteries in household trash.
2. Even used batteries may cause
severe injury or death.
3. Call a local poison control center
for treatment information.
4. Do not mix old and new batteries,
different brands or types of batteries,
such as alkaline, carbon-zinc,
or rechargeable batteries.
5. Ensure the batteries are installed
correctly according to polarity (+ and -).
6. Remove and immediately discard
batteries from equipment not used
for an extended period of time.
7. Non-rechargeable batteries
are not to be recharged.
8. Do not force discharge, recharge,
disassemble, heat above 104°F or
incinerate. Doing so may result in
injury due to venting, leakage or
explosion resulting in chemical burns.