2. NeuraLabel
  3. CALLISTO
CALLISTO

NeuraLabel CALLISTO User guide

  • I've reviewed the user manual for the Callisto printer and understand the unpacking, setup, and initial operation process. The document provides detailed steps on removing packaging, installing ink and connecting the printer to power and network. I'm here to help answer any questions you have about your printer.
  • What should I do with the box tape?
    How many people are needed to lift the printer?
    How do I save packaging materials?
    How to install ink?
Remove white handles.
Do not cut box tape.
REMOVE PACKAGING
Remove outer packaging. Lift printer with 2 people and
set on sturdy table.
Remove blue packaging tape. Pull out left/right orange sled
caps and blue tape.
Pull out orange ink cap
and blue tape.
UNBOX PRINTER
Remove screen cover.
READY PRINTER
Install ink by pushing in until
cartridge clicks into place.
Plug in power and network
cables. Turn on power switch.
In about 2 minutes Printer Ready
displays in lower left display corner.
UNBOX PRINTER
REMOVE INTERIOR PACKAGING
READY PRINTER
Lift upper box lid from
lower box.
Watch the Setup Video
www.neuralabel.com
support@neuralabel.com
Save packaging materials with
the original printer box in case
printer is shipped at a later date.
Printer Setup
In The Box
Ink Set
Power Cable
Network Cable
Printer
Packaging Materials
/