4000 South Bell Ave. Chicago IL 60609 - 773.847.1400 - www.newstarlighting.com
WARNING:
• DISCONNECT POWER BEFORE BEGINNING INSTALLATION.
• FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH THE NATIONAL
ELECTRIC CODE AND ANY LOCAL CODES.
• TO BE INSTALLED ONLY BY A QUALIFIED ELECTRICIAN.
• RISK OF FIRE, USE A MINIMUM OF 90 DEG C SUPPLY CONDUCTORS.
INSTALLATION INSTRUCTIONS:
1. Mount step light housing to building
structure via housing mounting screws or
hanger bars. See detail A & B.
2. Position LED module near housing.
See detail A.
3. Connect step light hot, neutral, and ground
conductors to matching building conductors.
4. Secure step light LED module and trim to trim
mounting screws, allen wrench provided.
See detail A.
5. Install trim mounting screw cover caps.
See detail A.
SNL3 SERIES INSTALLATION INSTRUCTIONS
DETAIL B
HOUSING
DETAIL A
HOUSING
MOUNTING
SCREW
LED MODULE
COVER
CAP
TRIM
MOUNTING
SCREW
REMOVABLE
PLUG
TRIM
U-2 HANGER BAR TO MOUNT WITH METAL OR WOODEN
FRAMING. MOUNTING HARDWARE BY OTHERS.
/
