ZUC-A9035-EB-GA

Crystorama ZUC-A9035-EB-GA User manual

  • Hello! I've reviewed the assembly instructions for the CRYSTORAMA ZUC-A9035-EB-GA light fixture. This document outlines the steps for assembling the fixture, including attaching the loop to the frame, mounting the canopy, and installing the bulbs. It also specifies the need for 6 candelabra bulbs and recommends using LED bulbs. I'm ready to assist you with any questions you may have about the assembly process or the fixture's features.
  • How many candelabra bulbs are needed for this fixture?
    What is the recommended wattage for the bulbs?
    Can I use regular non LED bulbs?
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL# ZUC-A9035-EB-GA
All electrical components must be installed by a
licensed electrician in accordance with the National
Electric Code and the appropriate
local electrical codes.
You will need 6–Candelabra
40 Watts Recommended 60 Watts Max
USE LED BULBS FOR EXTENDED USE
This fixture is DRY rated
How to Install:
1. Screw the Loop (1) onto the Frame (2).
2. The canopy of the fixture can now be mounted to the
ceiling by following instruction Drawing 2.
3. Install the Bulb (4) into the Socket (3).
Bulb replacement:
Install the Bulb (4) into the Socket (3).
lntertek
CM
US
C
26"
24"
Loop (1)
Bulb (Not
included) (4)
Socket (3)
Frame (2)
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL# ZUC-A9035-EB-GA
Part Numbers
A. (1) Mounting Hardware
B. (1) Canopy; w5"x h0.75"(XFW9034EBCAN5IN)
C. (1) Collar Ring
D. (1) Collar Loop
E. (2) Link
F. (1) Chain ; w4.2mm x L72" (XFW9030EBGACHA4.2MM)
G. (1) Loop
H. (6) Socket (H2 ")
I. (1) Frame
F
Junction Box
B
C
DE
E
A
G
I
H
/