2. Emeril Lagasse
  3. SB-PB-01
SB-PB-01

Emeril Lagasse SB-PB-01 Operating instructions

  • Hello! I'm a chat assistant and I have reviewed the user manual for the EMERIL LAGASSE Pizza Grill Cover. This document contains instructions on how to assemble the handle of the grill cover, detailing the steps including inserting the handle, loosely tightening screws and using the Allen wrench to secure it. I'm ready to answer your questions about this product and its assembly process.
  • What is the first step in assembling the Pizza Grill Cover handle?
    What is the second step in assembling the handle?
    How should screws be tightened to secure the handle in place?
Assembling the
Pizza Grill Cover
1. Insert the handle through
the slots on the front
side of the Pizza Grill
Cover (Fig. A).
2. Place the two screws
into the part of the
handle that protrudes
through the rear of the
Pizza Grill Cover (Fig. B)
and tighten loosely.
3. Slide the handle up
into the narrow part of
the slots and use the
supplied Allen wrench to
fully tighten the screws to
secure in place (Fig. C).
Distributed by:
Tristar Products, Inc.
Faireld, NJ 07004
© 2020 Tristar Products, Inc.
Made in China
EMERIL-PZG_IBI_TP_ENG_V2_210223
Fig. A
Fig. B
Fig. C
/