2. Vents
  3. MV 150

Vents MV 150, MV 150 Vs User manual

  • I have analyzed the installation manual for the Vents-US MV 150 hood. This document outlines the step-by-step procedure for correctly installing the hood, including the required tools and the sequence of actions. I am ready to assist you with any questions about the installation process or other related queries.
  • What tools are required for installation?
    What is the first step of installation?
    How do you fix the frame to the mounting surface?
MV 150
INSTALLATION
TOOLS REQUIRED
Drill Hammer Screwdriver Dowel 4 pcs Screws 4 pcsPencil
1 DISASSEMBLE THE HOOD 2 MARK FASTENING HOLES USING
THE FRAME
3 DRILL HOLES ON THE
MOUNTING SURFACE
ACCORDING TO THE MARKING
4 INSERT THE DOWELS IN THE
HOLES.
5 FIX THE FRAME ON THE MOUNT
ING SURFACE WITH SCREWS.
6 INSTALL THE FILTER AND FIX THE
HOOD ON THE FRAME USING
THE LATCHES.
MIU_58_MV_120EN
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: 1-888-640-0925, 513-583-5786, Fax: 513-268-4597
E-mail: [email protected]
/