Trendnet TV-IP345PI Installation guide

Category
Security cameras
Type
Installation guide

TRENDnetUser’sGuide
CoverPage


©Copyright2016TRENDnet.AllRightsReserved.
TRENDnetUser’sGuide
TableofContents
i
Contents
ProductOverview....................................................................................1
PackageContents.............................................................................................................1
Features............................................................................................................................1
ProductHardwareFeatures.............................................................................................2
Installation..............................................................................................3
HardwareInstallation.......................................................................................................3
CameraInstallation..........................................................................................................5
Configuration..........................................................................................7
ViewingCameraBasicFunction.......................................................................................7
ConfiguringtheCameraSetting.......................................................................................9
SYSTEM...........................................................................................................................10
NETWORK.......................................................................................................................12
AUDIO/VIDEOSETTING..................................................................................................23
EVENTCONFIGURATION................................................................................................28
LOGOUT..........................................................................................................................34
AccessingthecamerawithChrome.......................................................34
Troubleshooting....................................................................................35


©Copyright2016TRENDnet.AllRightsReserved.
1
TRENDnetUser’sGuide
TVIP345PI
ProductOverview
TVIP345PI
PackageContents
TVIP345PI
QuickInstallationGuide
CDROM(Utility,Software&User'sguide)
Networkcable(1.5M/5ft.)
RJ45coupler
CameraMountinghardware
Features
TRENDnet’sIndoor/Outdoor4VarifocalMPPoEIRDomeNetworkCamera,modelTV
IP345PI,providespowerful4MPHDnightvisionat30fpsincompletedarknessforupto
20m(66ft.).ThisIP66weatherratedcamerafeaturesmanualpan/tiltandauto‐focus/
opticalzoomwhichprovideinstallation
flexibilityandtimesavings.Usetheincludedpro
grade software to manage up to 32 TRENDnet cameras or download the free iOS® or
Android™mobileapp.
4Megapixel
Record2688x1520pixelresolutionata30fpsinthespacesavingH.264compression
format
AutoFocus/OpticalZoom
Autofocussavesinstallationandtroubleshootingtimeandremoteopticalzoomallows
userstocapturetheprecisedesiredviewingfield
NightVision
Nightvisionupto30m(100ft.)incompletedarkness
PoE
SaveinstallationcostswithPoweroverEthernet(PoE)
OutdoorReady
OutdoorIP66weatherratedwithanoperating
temperaturerangeof‐20to60°C(4to
140°F)
GPIOPortsandAlerts
NetworkanalarmsystemtoInput/Outputports
AudioSupport
Audioinandoutportsforthirdpartymicrophoneandspeaker(soldseparately)


©Copyright2016TRENDnet.AllRightsReserved.
2
TRENDnetUser’sGuide
TVIP345PI
PowerPort
SaveinstallationcostswithPoweroverEthernet(IEEE802.3af)
MicroSDCardSlot
Addupto64GBmemoryforonboardvideostorage
DWDR
DigitalWideDynamicRangeimprovesvideoqualityinhighcontrastlighting
environments
MotionDetection
Createmotiondetectionwindowswithseparatesensitivity
settingsandeventtriggers
IPv6/ONVIF
IPv6supportedandONVIFcompliant
Varifocal
Opticalzoombyafactorof4.2xwithautofocustoafinalfixedpositionforinstallation
flexibility
MultiLanguageInterface
SupportforEnglish,French,Spanish,German,andPortuguese
ComplimentaryApp
Livevideotoamobile
devicewithafreeiOS
®
andAndroid
TM
apps
ComplimentarySoftware
ComplimentaryprogradesoftwaretomanageuptoTRENDnet32cameras
ProductHardwareFeatures
CameraOverview
Housing:IP66andIK10ratinghousing.
IRLens:IRlensforthecamera.
CameraBase:themountingstandtoholdthecamera.
Housing
IR Lens
Camera Base


©Copyright2016TRENDnet.AllRightsReserved.
3
TRENDnetUser’sGuide
TVIP345PI
CameraConnectors
PowerConnector:Connectsthepoweradaptertosupplypowertothecamera
ifusingnonPoEconnection
Microphone In: Connects an external microphone to receive the onthespot
soundwherethecameraisinstalled
.
Ethernet/PoE Port: Plugs the network cable to connect to your local area
network (LAN). If you are using the PoE, you must have the network cable
connecttoyourPoEswitchorPoEInjector.
GPIO Port:Connectexternal device.Please referto I/Osetting paragraph. It's
alsoused
forIPcamerareset.PleaserefertoFactoryDefaultparagraph.
SpeakerOut:Connectsanexternalaudiodevice(suchastheactivespeaker)to
deliversoundviathecamera.
Installation
HardwareInstallation
ViewingAngle
Choose the location where has good angle to shoot the image you expect to see. The
motiondetectionareashouldalsobeconsideredwheninstallingthecamera.
ManualPan/Tilt
Thecameracanmanualpan/tilttoyourdesiredlocation.
Waterproofing
Thecameraisdesignedtobewaterproof.However,youneedtoprotecttheconnectors
fromwaterdamage.Forexample,youcantapethejunctionpointsoftheconnectors
whileyouconnectthecablesorpurchaseaweatherproofcable/powercord
protector.
Power
Connector
Speaker
Out
Microphone
In
GPIO
Port
Ethernet /PoE
Port


©Copyright2016TRENDnet.AllRightsReserved.
4
TRENDnetUser’sGuide
TVIP345PI
VandalDomeInstallationTips
InordertoensureIP66waterprooflevel,pleaseinstallthevandaldomeaccordingtothe
instructions.
a. Theunusedcableoutletholemustbeclosedandthewaterproofconnectoronthe
usedholemustbefirmlylocked.
b. Werecommendthebottomofhousingbeset
andfirmlysealedonasmoothflat
surface.
c. Whenmountingthecamerahousingonaceilingorwall,pleaseusethescrewswith
theblackrubberorings.Withouttheoring,watermayseepintothemachine.
d. Turnandloosenthecontrolstick,shiftrightandleft
toadjustthevarifocallens
untiltheimagebecomesclear,then turnandtightenthesticktofixit.
e. Beforeclosingthedomecover,makesurethattheblackrubberbandstickstothe
insideofthecovercompletely.Iftherubberbandiscrookedoruneven,it
may
causethecameratonolongerbewaterproof.
f. Lockthescrewsonthedomecovertightlytoensurethere'snogapbetweenthelid
andthebase.
Note:Whenconnectingcablesintomachine,itisrecommendedtouseahosetoinclude
allthecablesinsideinsteadof
plugginginseveralcablesseparately.Watermayseep
throughagapfrombundledcables.Youcanalsosealtheconnectorholewithsilicone
afterinstallation.


©Copyright2016TRENDnet.AllRightsReserved.
5
TRENDnetUser’sGuide
TVIP345PI
CameraInstallation
1. Insert the Installation CDROM into your computer’s CDROMdrive to initiate the
AutoRunprogram.ClicktheInstallCamera.
2. WritedowntheMACIDofthecamera
3. Pluginandconnectthepoweradaptertothecamera.IfyouareusingthePoEto
supplypowertothecamera,pleaseskiptothenextstep.ClickNextwhenyouare
done.
4. Waitwhilecameraissearching.


©Copyright2016TRENDnet.AllRightsReserved.
6
TRENDnetUser’sGuide
TVIP345PI
5. The founded cameras will show on the screen. The camera already selected by
defaultifyouhaveonlyonecamerainstalled.Ifyouhavemorethanonecamerain
thesameNetwork,youwillneedtoidentifythecamerabytheMACID.ClickNext.
6. Select "DHCP"
option toassign an IPby DHCP serveror Select "FixedIP" toset IP
addressmanually.ClickNext.
7. If youselect "Fixed IP",fill out theIP address,subnet mask,defaultgateway, DNS
server.Please ensure that the IP address of the camera and the computer must
within
thesamenetwork.ClickNext.
8. TypeinthePassword.Thedefaultpasswordis“admin”.Youmust changethedefault
password of the camera. Enter the default password: admin and enter the new
password.Thepasswordmustbebetween8and32characters.(Alphanumeric:az,
AZ,0
9),andenteringthepasswordtwotoconfirmpassword.


©Copyright2016TRENDnet.AllRightsReserved.
7
TRENDnetUser’sGuide
TVIP345PI
9. Click the hyperlink here to access to the camera’s web page or click Next. It is
recommendedthatyouaccesstheIPcameranowifitwasusingaDHCPconnection.
10. Click Finish to exit the program or click Home to return to the main screen.
Thisdevice
alsosupportstheMobileApp.UsingyourmobiledevicetoscantheQR
codetoinstalltheApp.
  
Configuration
ViewingCameraBasicFunction
OpentheWebbrowseronyourcomputer(exampleshowedinthisUser’sGuideisbased
ontheInternetExplorer).IntheAddressbar,typetheIPaddressyougotfrom"Camera
Installation"chapterorfoundbyIPInstaller,andthenpress[Enter].
Whentheloginwindowappears,entertheUser
name(admin)andPasswordandpress
OKtoaccesstothemainscreenofthecamera’sWebConfiguration.


©Copyright2016TRENDnet.AllRightsReserved.
8
TRENDnetUser’sGuide
TVIP345PI
Afteryouloginintothelivescreenofthecamera,themainpagewillappearasbelow:

ThelivescreenoftheIPcameraconfigurationprovidesyouwithmanyusefulinformation
andfunctions,including:
SETUP:Clickthebuttontoconfigurethecamera.
LOGOUT:Clickthebuttontolog
outofthecameraviewingandconfigurationpage.
DigitalZoom:Clickonthe+ororthedigitalbuttontozoominandout,orrightclick
ontheliveviewandselectzoomtoconfigurefrom100%to400%zoomsize.
FOCUS:Clickon+orbutton
orAFbuttontoadjustthefocusofthecamera.
Homebutton:resumethecamerabacktodefaultviewingsettings.
Snapshotbutton:Clickonsnapshotbuttontosavethecurrentimagetoadestination
folder.
Recording button: Click on recording button to save the current image to a
destinationfolder.
Speaker/Microphone: Click the "Mic" to speak out through the camera. Click the
“Speaker”toreceivetheonsidesoundandvoicefromthecamera.
OnlineVisitor:ItshowshowmanypeopleconnecttothisIPcamera.
RelayOn:ClicktheRelayout"ON"totriggerthe
relayoutputfortesting.click"Off"
tostoptriggering.Toswitchbetweenthesetwo typesofrelayout, pleasereferto
EventConfiguration>>GPIOSettingsessionfordetail.
Onetheliveviewvideo,rightclickthemousefortheadditionalmenuoptions.
Snapshot:SaveaJPEGpicture
RecordStart:RecordthevideointhelocalPC.Itwillaskyouwheretosavethevideo.
To stop recording, rightclick the mouse again. Select “Record Stop”. The video
formatisAVI.UseMicrosoftMediaPlayertoplaytherecordedfile.
Mute:Turnofftheaudio.
Clickagaintoturnonit.
The"mute"buttondoesnotaffecttheplaybackrecordingvideo.Aslongasthe"2
WayAudio"optionintheaudiosettingisenabled,alltheaudiowillberecordedinto
theplaybackvideoevenyouclick"mute"inthelivepage.
Full
Screen:Fullscreenmode.
Zoom:Enablezoominandzoomoutfunctions.Select“Enabledigitalzoom”option
firstwithinthepopupdialogueboxandthendraganddropthebartoadjustthe
zoomfactors.


©Copyright2016TRENDnet.AllRightsReserved.
9
TRENDnetUser’sGuide
TVIP345PI
FrameBuffermSec:Thisfunctionistobuildatemporarybuffertoaccumulate
severalvideoframes.ThisfunctioncanmakevideosmoothgoingwhentheNetwork
speedisslowandlag.
ConfiguringtheCameraSetting
Toconfigurethecamera,click onthelivescreen.

TheWebConfigurationcontainsthesettingsthatarerequiredforthecameraintheleft
menubar,includingSystem,Network,Audio/VideoSetting,EventConfigurationand
Logout.
Toreturntothelivescreen,pleaseclickthebutton.


©Copyright2016TRENDnet.AllRightsReserved.
10
TRENDnetUser’sGuide
TVIP345PI
SYSTEM
System>>SystemInformation>>ServerInformation
MACAddress:ItindicatestheIPCamera’sMACaddress.
ServerName:TheCameraname.
LEDIndicator:TurntheLEDlightonoroffbyclicktheON/OFFbutton.
Language: There are 5 languages options. When changing the
language, it will
promptdialogueboxforconfirmation.Click"Yes"toproceed.
System>>SystemInformation>>OSDSetting
TimeStamp:Enableordisablethetimethatwillshowonthelivescreen.
-
Position:Afterenablingtimestamp,youcanselectthepositionoftimestamp
onthelivescreen.
Text:EnabletheTextoptiontohavethedesiretextshowonthecameralivescreen.
-
TextEdit:Clickittocallout"textedit"window:
-
Text:Keyinthewordsyouwanttoshowonthelivescreen.
-
Opaque:Setthebackgroundtransparencyofthetext.



©Copyright2016TRENDnet.AllRightsReserved.
11
TRENDnetUser’sGuide
TVIP345PI
System>>SystemInformation>>TimeSetting
ServerTime:ItshowscurrentIPcameraserver time.
DateFormat:Selectthedatedisplayformat.
TimeZone:Selectyourtimezone.Itaffectservertimewhenyouuse"NTP"time.
EnableDaylightSaving:selectthestartand
enddaylightsavingtime.
NTP:TypeintheIPaddressoftheNTPserverandintervaltime.ThetimeoftheIP
camera will be synchronized with NTP server time. To use this option, if the NTP
ServerisunderWAN,theIPcameramustbesettoaccess
WAN(UsingtheWANIP
thatprovidebyyourISPprovider,orsetupbyUPnPPortForwarding(page18)
SynchronizewithPC'stime:In"Date"and"Time"columnitshowsyourcurrentPC
time.Click"Apply"tomaketheIPcameratimethesamewithPCtime.Note
thatIP
camerawillnotcheckwithPCateverymomentautomatically.Everytimewhenyou
wanttosynchronizetheIPcameratimewithPCtimeagain,pleaseselectthisoption
andclick"Apply".
Manual:Typeinthedateandtime,andclick"Apply".
System>>UserManagement
DirectVideoStreamAuthentication:
Tostreamthevideodirectlywithoutgoingthroughtheconfigurationpage,youcan
accessitviaInternet.
Stream1Video:http://camera_ip_address:port/stream1view.htm
Stream1Video:http://camera_ip_address:port/stream2view.htm
EnablePasswordProtection:
-
Yes:Userneedstoenterusernameandpasswordtostreamthecamera.
-
No: User can stream the camera without entering the username and
password.
-
Add user:Enter the username and password to add guest users to access the
camera.Theguestusercanonlyviewtheliveviewvideoandisnotallowedtodoany
configuration.
UserList:Listallusersthatwereaddedintothecamera.ClickEdit
tomodify
theuserinformation.ClickRemovetoremovetheusersfromthelist.


©Copyright2016TRENDnet.AllRightsReserved.
12
TRENDnetUser’sGuide
TVIP345PI
System>>Tools
FirmwareUpgrade:
Toupdatethefirmware,clickBrowsetoselectthefirmware,thenclickUpgrade
to proceed. Please do not disconnect power or Network cable during firmware
upgrading.
SystemReboot:ClickReboottoreboottheIPcamera.
FactoryReset:Click
Resettoresetallthesettingsbacktofactorydefaultvalue
Configuration:
-
Backup:ClickBackuptosavetheconfigurationtoyourcomputer.
-
Restore:Click"Browse..."toselecttheconfigurefilefromyourcomputerthen
clickRestoretorestoreallsetting
NETWORK
Network>>NetworkSetting>>IPAddressSetting
DHCP:SelectthisoptionwhenyournetworkusestheDHCPserver.Whenthecamera
startsup,itwillbeassignedanIPaddressfromtheDHCPserverautomatically.
Static IP: Select this optiontotype inIP address, subnet
mask,gateway, and DNS
manually. Default IP address is 192.168.10.30 if the camera doesn't connect with
DHCP server. DNS (Domain Name System) translates domain names into IP
addresses.EnterthePrimaryDNSandSecondaryDNSthatareprovidedbytheISP.


©Copyright2016TRENDnet.AllRightsReserved.
13
TRENDnetUser’sGuide
TVIP345PI
Network>>NetworkSetting>>IPv6Setti ng
IPv6isa newernumberingsystemthatprovidesamuchlarger address poolthanIPv4,
whichaccountsformostoftoday’sInternettraffic.YoucanmanuallyenterIPv6address
,enableDHCPv6togetIPv6addressautomatically.
ManuallysetuptheIPv6address:
YoucansetupIPv6manuallybyenterIPAddress,
Gateway,andDNS.
DHCPv6: If you have a DHCPv6 server, enable this option to assign the IPv6 from
server.TheassignedIPaddresswillbedisplayed
IPv6 Address:A virtual IPv6 addressgenerated by the IP camera.
This virtualIPv6
addresscannotuseonWAN.ToaccesstheIPcameraviaIPv6address,openaweb
browserandtypeinhttp://[IPv6Address]intheaddressbar.The[]parentheses
markisnecessaryforIPv6address.
Network>>NetworkSetting>>PortSetting
Web Page
Port: Setup HTTP web page connecting port which is also video
transmittingport(Default:80)
HTTPSPort:SetupHTTPSconnectingport(Default:443)
Network>>NetworkSetting>>WebAuthentication
The camera supports two levels of authentication, Basic and Digest. The Basic option
having the username and password transmitted as plain text.The digest option
encryptedusernameandpasswordduringdatatransmission.Thedefaultauthentication
issettoDigest.
Network>>NetworkSetting
>>UPnP
UPnP:
ThisIPcamerasupportsUPnP(UniversalPlugand Play)whichis a setofcomputer
networkprotocolsthatenablethedevicetodeviceinteroperability
UPnPPortForwarding:
Whenthecameraisinstalledunderarouter,enableUPnPPortForwardingtoletthe
routeropenports
so thatthevideo streamscanbesent outfromaLAN.Set Web
Port,HttpsPort,andRTSPport,andmakesureyourroutersupportsUPnPandthe
functionhasbeenactivated.
After type in the port number and click "Apply", the port forwarding status will
displaybesidethe
portcolumn.Therearethreestatuswillshow.
-
Registeredsuccessfully:UPnPportforwardingsettingsucceeds.
-
Therouterdoesn't supportUPnP PortForwarding:Thecameracan detectthe
router, but router return a message that it does not support UPnP Port
Forwarding.


©Copyright2016TRENDnet.AllRightsReserved.
14
TRENDnetUser’sGuide
TVIP345PI
-
Therouteriswithsomeproblems.Pleaserebootit:Thecameracannotdetect
therouter.Pleasecheckyourrouter.
IfthisrouterhasaWANIP,thisfunctionallowsthecameratodoWANaccess.Inthe
addressbarofbrowser,keyin:"https://(routerWANIP):(externalwebport)
/"to
accesstheIPcamera.
Network>>NetworkSetting>>RTSPSetting
RTSPServer:
Enableit,thenyoucanaccesscameraandgetimageviaRTSPprotocol.
IfyouhaveamediaplayerthatsupportsRTSPprotocol,youcanuseittoreceivethe
video streaming fromIP
camera. TheRTSP address canbe set for twostreamings
respectively.
RTSPAuthentication: 
"Disable" means everyone who knows your camera IP Address can link to your
cameraviaRTSP.Nousernameandpasswordarerequired.
Under"Basic"and "Digest"authenticationmode,thecameraasksthe usertogive
username
and password before allows accessing. The password is transmitted as
plain text under basic mode, which provides a lower level of security than under
digestmode.Makesureyourmediaplayersupportstheauthenticationschemes.
RTSPPort: It's usedforTCPconnection.Setupport forRTSPtransmitting(Default:
554)

RTSP Start and End Port:It's used for UDP connection. Setup port for RTSP
transmitting(Default:5000,9000)
Network>>NetworkSetting>>MulticastSetting(BasedontheRTSPServer)
Multicastisabandwidthconservationtechnology.Thisfunctionallowsseveralusersto
sharethesamepacketsentfrom
IPcamera.TouseMulticast,appointIPAddressandport
here.TTLmeansthelifetimeofpacket.Thelargerthevalueis,themoreusercanreceive
thepacket.
TouseMulticast,besuretoenablethefunction"ForceMulticastRTPviaRTSP"inyour
mediaplayer.Thenkey
intheRTSPpathofyourcamera:"rtsp://(IPaddress)/"toreceive
themulticast.
Network>>NetworkSetting>>ONVIF
UnderONVIFconnection,thevideo willbetransmittedbyRTSP.Besure toenablethe
RTSPserverinIPsetting,oryou'renotabletoreceivethevideoviaONVIF.
ONVIF:
Choose your ONVIF version. The two devices that use ONVIF to communicate
shouldbesettothesameversion.


©Copyright2016TRENDnet.AllRightsReserved.
15
TRENDnetUser’sGuide
TVIP345PI
Security:
Select "Disable", then the username and password are not required when
accessingthecameraviaONVIF.Select"Enable",thenusernameandpassword
arenecessary.
RTSPKeepalive:
Whenthefunctionisenabled,thecamerachecksonceinawhileiftheuserwho
linkstothecameravia
ONVIFstillkeepsconnecting.Iftheconnectionhadbeen
broken,thecamerastopstransmittingvideotouser.
Network>>NetworkSetting>>Bonjour
This function enable Safari browser's bookmark to linkto this IP camera. The Bonjour
nameisthenamethatdisplayinthebookmark.Pleasenotethe
BonjourfunctiononSafari
browserdoesnotsupporthttpsprotocol.Ifyouselected“https”mode,youwillseethe
cameraappearsonSafari’sbookmarksbutwillnotbeabletoaccessthecamera.
Network>>NetworkSetting>>LLTD
IfyourPCsupportsLLTD,enablethisfunctionthenyoucan
checktheconnectionstatus,
properties,anddeviceposition(likeIPaddress)ofthisIPCamerainthenetworkmap.In
WindowsVistaorWindows7,youcanfindLLTDthroughthepath:CallouttheControl
Panel→NetworkandInternet→NetworkandSharingCenter→Click"Seefullmap".
Network
>>Advanced>>HTTPS
WhentheusersaccesscamerasviaHttpsprotocol,thetransmittedinformation willbe
encryptedsothatthesecuritylevelisarisen.
Youcanselecttheconnectiontype.
Http:usercanaccessthecameraviaHttppath.
Https:usercanaccessthecameravia
HttpspathbutcannotviaHttppath.
Http&Https:BoththeHttpandHttpspathcanbeusedtoaccessthecamera.When
you change the setting of connection type, it may cause connection error or
disconnectionerrorifyouswitchtheprotocoldirectly.Therefore,Http&Https
mode
is necessary. If you want to change from Http to Https, please switch to “Http &
Https”modefirst,andthenswitchto“Https”mode.Samemethodwhenyouchange
fromHttpstoHttp.
TheHttpsprotocolhascertificateverifyingmechanism.Whentheuseraccessawebsite
viaHttps,
thebrowser willcheckthecertificateof thatdomainandverifyitstrustiness
andsecure.
Certificategenerationprocess:
1. Remove the existing certificate: Before you generate a new certificate, please
removeexistingone.Select"Http"connectiontypeandclick"Remove".Ifadialog
boxpopsuptoaskyouto
confirm,click“Yes”.


©Copyright2016TRENDnet.AllRightsReserved.
16
TRENDnetUser’sGuide
TVIP345PI
2. CreatedRequest:Fillinthefollowingformandclick“apply”.
3. Afteryougenerateacertificaterequest,ifyouchoosetoturnittothetrustedthird
partytoverify,pleaseclick“Content”andcopyalltherequestcontent.
4. Accordingtothecertificatesource,thereare
twowaystoinstallthecertificate.
-
Ifyouhadsentthecertificaterequesttodosignandreceivedasignedcertificate,
pleaseclick”browse”andfindthecertificatefileinyourcomputer.Click“Apply”
toinstallit.
-
Ifyouchoosetogenerateaselfsignedcertificate,fillinthefollowingformsand
setvalidityday,click“Apply”tofinishinstalledit.
Afterfinishinginstallation,youcanclick“Content”tocalloutandcheckthecertificate
content.



©Copyright2016TRENDnet.AllRightsReserved.
17
TRENDnetUser’sGuide
TVIP345PI
5. TouseHttpstoaccesscamera,openyourbrowser,andkeyin"https://(IPaddress)/"
intheaddressbar.Nowyourdatawillbetransmittedviaencryptedcommunications,
andthebrowserwillcheckyourcertificatestatus.Ifitshowsyouawarningmessage.
Thewarningmessagemeantthatthecertificateis
selfsignedorsignedbydistrusted
institution.ClickContinuetothiswebsitetoviewtheviewthecamera.
Network>>Advanced>>SNMP
SNMP (Simple Network Management Protocol) provides a simple framework for
administeringnetworkedhardware.TomanagetheIPcamera,youhavetoprepareaMIB
browser or
similar tools first. SNMPv1, SNMPv2c, and SNMPv3 can be enabled
simultaneously.
Thefollowing examplesare basedonMG‐ SOFTMIB Browser.Dependingon yourMIS
Browser,youmayseedifferentinterfaceandoptions.Pleaserefertotheusermanualof
yourMIBBrowser.
SNMPv1andSNMPv2:
Theterm"Community
name"inSNMPv1andSNMPv2ccanberoughlyregardedas
key.Thepersonwhohasthecommunitynamehastheauthoritytoreadoreditthe
informationofIPcameraviaSNMP.
Clickthe boxtoenable SNMPv1orSNMPv2c protocol,andspecifythe community
name for write (read and write)
and read (readonly). The user who use read
communitynametoaccesstheIPcameracannotmodifyanydataofthecamera.The
communitynamecanbeanyEnglishcharactersandnumbers,andmustbeshorter
than31bits.
SNMPv3:
Fordatasecurityreason,theauthenticationand
encryptionassurancesareadded
whendevelopingSNMPv3.Theuserhastogivenotonlythesecurityname(similar
with "community name" in v1&v2c) but the password in order to access the IP
camera. Please set security name, authentication type, authentication password,
encryptiontype, encryptionpassword ofwriteandreadrespectively.
Thesecurity


©Copyright2016TRENDnet.AllRightsReserved.
18
TRENDnetUser’sGuide
TVIP345PI
name can be any English characters and numbers, and must be shorter than 31
letters.Thepasswordmustbe8~64lettersinlength.
DifferentfrominSNMPv1andv2c,theuserhavetocreateanaccountwhenusing
SNMPv3.Intheaccountparameters,keyinthesecuritynameandpasswordyou
set
inthecameratogetaccessing.
SNMPv1/SNMPv2Trap:
Trapisamechanismthatallowsamanageddevicetosendmessagestothemanager
instead of waiting passively for polling from the manager. Specify the trap event.
Whenthoseeventsoccur,thecamerawillsendtheringmessage
totheTrapAddress,
whichis usuallythemanager's IPaddress.Trap Communitymeansthecommunity
thatcanreceivethetrapmessage.
Note:TrapAddressmustbeunderthesameLANwithIPcamera.
-
ColdStart:Thecamerastartsuporreboots.
-
Settingchanged:TheSNMPsettingischanged.
-
NetworkDisconnected:Thenetworkconnectionwasbrokendown.(Thecamera
willsendtrapmessagesafterthenetworkbeingconnectedagain)
-
V3AuthenticationFailed:ASNMPv3useraccounttriestogetauthenticationbut
failed.(Duetoincorrectpass wordorcommunity)
Network>>Advanced>>IPAddressFilter
YoucanallowordenyanIPaddressor eve na rangeoftheIPaddresstoaccess theIP
camera.
IfyouwouldliketodenyarangeofIPaddressbutwouldallowanIPwithinthat
rangecanaccessthecamera,pleasesetuptheallowIPaddressinthe1
st
priorityandset
thedenyrangeofIPaddressas2
nd
priorityasexamplebelow.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Trendnet TV-IP345PI Installation guide

Category
Security cameras
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI