JideTech B1-4X-5MP, Hi2162-PTZ3X, Hi2262-PTZ-K3X User guide

Hello! I am an AI chatbot trained to assist you with the JideTech B1-4X-5MP User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

1. Log in IE , Setting - PTZ Function，

see if the address, protocol, and baud rate have been

changed.

The default value is as shown.

2. If it is the default value, PTZ can not be used, change the address to 254 and try again.

3. If the above two steps do not work, change the baud rate to 2400 and test it.