Zink Snap Touch Portable Instant Cam User guide

Brand: Zink

Model: Snap Touch Portable Instant Cam

Type: User guide

This manual is also suitable for

Polaroid Snap Touch Portable Instant Cam

Polaroid Snap Touch Portable Instant Cam

Polaroid Snap Touch Portable Instant Cam is a user-friendly device that allows you to capture and print your memories instantly. With its sleek design and intuitive interface, you can easily take high-quality photos and share them with friends and family.

Here are some of the key features of the Polaroid Snap Touch Portable Instant Cam:

13-megapixel camera takes sharp and vibrant photos.
ZINK Zero Ink Printing Technology eliminates the need for ink cartridges, making printing fast and convenient.
2.4-inch LCD screen provides a clear view of your photos before you print them.

Polaroid Snap Touch Portable Instant Cam

Here are some of the key features of the Polaroid Snap Touch Portable Instant Cam:

13-megapixel camera takes sharp and vibrant photos.
ZINK Zero Ink Printing Technology eliminates the need for ink cartridges, making printing fast and convenient.
2.4-inch LCD screen provides a clear view of your photos before you print them.

Quick Start Guide

GETTING STARTED WITH YOUR POLAROID

SNAP TOUCH

Step 1: Charge your camera

Plug the cable into a 1amp charge block and into your camera. Make sure the camera is laid flat

on the ground and the cable is not fully extended.

Step 2: Turn your camera on

Press and hold the power button until you hear the welcome sound.

Step 3: Loading paper into the printer

Always load the blue sheet facing down with the gloss of the paper up. Avoid touching the paper

as much as possible by holding from the sides.

Step 4: Holding the camera for a selfie

Step 5: Holding the camera for a picture

Step 6: Take a picture

Press the shutter button to take the picture

Snap Touch Firmware Update

Works with all compatible Apple and Android mobile devices.

Please check your camera version before updating the firmware.

Please note: As the Snap Touch app is being retooled for iOS 11, some functions will be of

limited use until late December 2017, when the entire app will be redesigned for the new

iOS 11 feature set.

It’s time to update your Snap camera. Here’s how:

Step 1:

Check which version of the Snap Touch you currently have.

Warning: Use only the firmware version designed for your model camera. The use of any

other firmware can cause permanent damage to the device.

Snap Touch 1.0 has the power button integrated into the pop-up flash:

Snap Touch 1.2 has the power button next to the pop-up flash:

Step 2:

Download and unzip the correct firmware for your camera

SnapTouch 1.2 Firmware

SnapTouch 1.0 Firmware

Step 3:

Make sure you have an SD card inserted into your Snap, and that your camera is turned on.

Connect your camera to your computer.

Step 4:

When your camera appears on your desktop, save the downloaded file to your Snap.

Step 5:

Turn your camera off, then back on, to restart and begin the update.

Step 6:

While your firmware updates, the LED lights will turn red for 30 seconds.

Step 7:

Your Snap will beep to let you know the update is complete …

Step 8:

… and then it will power off.

Step 9:

Turn on your camera, reconnect your camera to your mobile device via bluetooth and start

printing.

FAQ:

How many sheets can I put in at once?

You can insert up to 10 sheets at a time.

Can i share my pictures from the Polaroid

Snap Touch to social media?

Yes, you either take out the MicroSD card and upload them to your computer or transfer your

photos via Bluetooth through the app.

Is there an option to add a classic white

border?

Yes, you can add a border on the app if you want to take the picture from your phone. If you take

a picture directly from your Polaroid Snap Touch, you can add a white border from the edit menu

on your camera.

Is there an option to add a classic white

border?

Yes, you can add a border on the app if you want to take the picture from your phone. If you take

a picture directly from your Polaroid Snap Touch, you can add a white border from the edit menu

on your camera.

The screen on my camera is frozen and

unresponsive.

Please reset the camera by pressing the Reset button on the bottom of the camera next to the

charging port.

What is the typical battery life of the

camera?

After a full charge, the Polaroid Snap Touch will last for about 15-20 prints.

Why are my prints coming out blank?

loading the paper, the glossy side should be facing up.

How do I connect my Polaroid Snap Touch

through Bluetooth?

Go to your Bluetooth settings on your Smartphone or Tablet. Connect to your Polaroid Snap

Touch.

Open the Polaroid Snap Touch App. Select your Polaroid Snap Touch.

***Please make sure that your Polaroid Snap Touch is on and not connected to any other

Bluetooth devices***

Can I use Zink paper other than Polaroid

Premium ZINK™ Paper?

The Polaroid Snap Touch was designed to work only with Polaroid Premium ZINK™ Paper.

Other papers may not be compatible with this camera.

What MicroSD cards can be used with the

Polaroid Snap Touch?

The Polaroid Snap accepts MicroSD cards upto 128GB.

Zink Snap Touch Portable Instant Cam User guide

Brand: Zink

Model: Snap Touch Portable Instant Cam

Type: User guide

This manual is also suitable for

Polaroid Snap Touch Portable Instant Cam

Polaroid Snap Touch Portable Instant Cam

Here are some of the key features of the Polaroid Snap Touch Portable Instant Cam:

13-megapixel camera takes sharp and vibrant photos.
ZINK Zero Ink Printing Technology eliminates the need for ink cartridges, making printing fast and convenient.
2.4-inch LCD screen provides a clear view of your photos before you print them.

Download PDF

report

Zink Snap Touch Portable Instant Cam User guide

This manual is also suitable for

Zink Snap Touch Portable Instant Cam User guide

Related papers

Other documents