Delta P99640LF-PB Specification

Category
Sanitary ware
Type
Specification

This manual is also suitable for

2 5/16"
(59 mm)
5"
(127 mm)
3 7/16"
(88 mm)
4 11/16"
(118 mm)
9 "
(229 mm)
3 7/8"
(98 mm)
1 5/8"
(42 mm)
to
2 3/8"
(61 mm)
1 3/8"
(35 mm)
Dia.
3 15/32"
(88 mm)
5 13/32"
(137 mm)
1 1/4"
(32 mm)
Dia.
1/2"-14 NPSM
4"
(102 mm)
Centers
6 5/16"
(161 mm)
1 1/8"
(29 mm)
Max. Deck
Thickness
Hole Size
2 X 1 1/8"~1 1/2"
(29~38mm)
2 1/8"
(54 mm)
Dia.
Min. 2 1/2" (64 mm)
Clearance to Back Splash
Recommended
WARRANTY
Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
P99640LF-
STANDARD SPECIFICATIONS
Max flow rate 1.2 gpm @ 60 psi, 4.5 L/min @ 414 kPa
Two handle lavatory faucet for exposed mounting
on 3 hole sinks
with 4" centers
The fully replaceable, washerless valve design rotates
from the full-off position to the full-on position in 90°
The valve stems on the hot and cold stems are
interchangeable
1/2" - 14 NPSM threaded male inlet shanks
Plastic pop-up type fitting with plated flange and
stopper
COMPLIES WITH:
ASME A112.18.1 / CSA B125.1
ASME A112.18.2 / CSA B125.2
Indicates compliance to
ICC/ANSI A117.1
EPA
WaterSense
®
PSP-L-P99640LF Rev. B
BATHROOM FAUCET
Two handle, metal lever, centerset lavatory faucet
with pop-up drain assembly
  • Page 1 1

Delta P99640LF-PB Specification

Category
Sanitary ware
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI