PureLink PT-SP-HD18 User guide

PureLink
Brand
PureLink
Model
PT-SP-HD18
Category
Video splitters
Type
User guide
www.purelink.de
1
1x8 HDMI Distribution Amplifier
with HDCP Support
User’s Guide
Designed in Germany
Made in Taiwan
© 2010 PureLink GmbH All rights reserved.
Models
PT-SP-HD18
www.purelink.de
2
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1 Safety and Notice ................................................................................................................... 3
1.2 Introduction ............................................................................................................................ 4
1.3 Package Contents ................................................................................................................... 4
1.4 Before Installation .................................................................................................................. 5
1.5 Panel Description ................................................................................................................... 5
1.6 Installation .............................................................................................................................. 6
1.7 Notice ..................................................................................................................................... 6
Section 2: Specifications ......................................................................................................................... 7
www.purelink.de
3
Section 1: Getting Started
1.1 Safety and Notice
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
The PT-SP-HD18 1x8 HDMI Distribution Amplifier with HDCP Support has been tested for conformance to
safety regulations and requirements, and has been certified for international use. However, like all electronic
equipments, the PT-SP-HD18 should be used with care. Please read and follow the safety instructions to protect
yourself from possible injury and to minimize the risk of damage to the unit.
Follow all instructions and warnings marked on this unit.
Do not attempt to service this unit yourself, except where explained in this manual.
Provide proper ventilation and air circulation and do not use near water.
Keep objects that might damage the device and assure that the placement of this unit is on a stable
surface.
Use only the power adapter and power cords and connection cables designed for this unit.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
www.purelink.de
4
1.2 Introduction
The PT-SP-HD18 1x8 HDMI Distribution Amplifier with HDCP Support provides the most cost effective and
advanced HDMI splitter solution on the market, by which the high definition video and high quality audio can be
transmitted to 8 different locations without losing quality. With built-in USB firmware update mechanism, the
compatibility among countless HDMI sources and receivers can be further guaranteed. With 12 bit deep color
video and high definition audio support, PT-SP-HD18 is suitable for high quality A/V broadcasting, digital signage
and education applications!
- Support HDMI Deep Color & 3D / DVI 1.0 compliant
- HDCP 1.2 compliant
- Wide Frequency Range: 25MHz~225MHz
- Video bandwidth: 6.75GBPS
- Supports conversion of HDMI signaling to DVI
- Resolution up to 1080p or WUXGA
- Automatic EDID learning
- Supports xvYCC, x.v.Color & Deep Color
- Supports Dolby Digital, DTS-HD and Dolby True HD audio
- USB firmware update for expanding compatibility
- Easy installation
Automatic EDID learning will detect all the connected HDMI equipped monitors and analyze all the content of
EDID. The EDID with minimal resolution support will be the reference EDID for incoming HDMI source players.
1.3 Package Contents
Before you start the installation of the switch, please check the package contents.
- PT-SP-HD18
x1
- Power Adapter (+5VDC, 4A)
x1
- User’s Guide
x1
www.purelink.de
5
1.4 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may
cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
1.5 Panel Description
1. HDMI Ouput1
2. HDMI Ouput2
3. HDMI Ouput3
4. HDMI Ouput4
5. HDMI Input
6. HDMI Ouput5
7. HDMI Ouput6
8. HDMI Ouput7
9. HDMI Ouput8
10. USB Connector
11. Power On/Off Indicator
12. 5V DC Interlocking Power Jack
When the connected HDMI display device is verified as HDMI and HDCP compliant, the corresponding green
LED will blink.
www.purelink.de
6
1.6 Installation
1. Switch off all devices, including monitors.
2. Connect to the receivers.
3. Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI INPUT.
4. Plug in 5V DC power supply.
5. Power on the HDMI displays.
6. Power on the HDMI source.
1.7 Notice
1. While connecting a new monitor to the splitter, experiencing a short period of time no display may be
expected. Automatic EDID learning will analyze the newly connected monitor to see if the EDID for the
HDMI input is necessary to update!
2. For long range high definition HDMI transmission applications, please adopt Cat-5e cable based HDMI
extenders.
3. For firmware update through USB, users MUST first turn off the power, plug USB cable connected to
your PC, and then power up the module! In this setup, the power LED indicator will NOT blink, and this
is normal! Execute the attached or download EPFlash.exe, and the following window will pop up. Click
on “OpenFile” button to direct to the new firmware HEX file, and keep PORT at USB 0! Meantime, keep
“Program With Verification” selected, and then click on “START” button on the bottom of the window!
Wait for seconds until the update process is completed! After firmware update is successfully
accomplished, please unplug USB cable and power off the splitter!
www.purelink.de
7
Section 2: Specifications
Technical
HDMI compliance
DVI compliance
HDCP compliance
Video bandwidth
Video support
Audio support
ESD protection
USB firmware updatable
Input TMDS signal
Input DDC signal
Input
Output
HDMI connector
Mechanical
Housing
Dimensions (L x W x H)
Weight
Model
Package
Fixedness
Power supply
Power consumption
Operation temperature
Storage temperature
Relative humidity
www.purelink.de
8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

PureLink PT-SP-HD18 User guide

PureLink
Brand
PureLink
Model
PT-SP-HD18
Category
Video splitters
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents