JBSYSTEMS LED BALL INDOOR Owner's manual

Category
Stroboscopes & disco lights
Type
Owner's manual

This manual is also suitable for

WWW.BEGLEC.COM
Copyright © 2006-2007 by BEGLEC cva.
Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.
Version: 1.4
Operation Manual
Mode d'emploi
Gebruiksaanwijzing
Bedienungsanleitung
Manual de instrucciones
EN
FR
NL
DU
ES
EN - DISPOSAL OF THE DEVICE
Dispose of the unit and used batteries in an environment friendly manner
according to your country regulations.
FR - DÉCLASSER L’APPAREIL
Débarrassez-vous de l’appareil et des piles usagées de manière écologique
Conformément aux dispositions légales de votre pays.
NL - VERWIJDEREN VAN HET APPARAAT
Verwijder het toestel en de gebruikte batterijen op een milieuvriendelijke
manier conform de in uw land geldende voorschriften.
DU - ENTSORGUNG DES GERÄTS
Entsorgen Sie das Gerät und die Batterien auf umweltfreundliche Art und
Weise gemäß den Vorschriften Ihres Landes.
ES - DESHACERSE DEL APARATO
Reciclar el aparato y pilas usadas de forma ecologica conforme a las
disposiciones legales de su pais.
PT - COMO DESFAZER-SE DA UNIDADE
Tente reciclar a unidade e as pilhas usadas respeitando o ambiente e em
conformidade com as normas vigentes no seu país.
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
1/36 LED BALL INDOOR
Thank you for buying this JB Systems
®
product. To take full advantage of all possibilities and for your own
safety, please read theseoperating instructions very carefully beforeyou start using this unit.
FEATURES
This unit is radio-interference suppressed.This product meets the requirements ofthe current European and
national guidelines. Conformity has ben established and the relevant statements and documents have been
deposited by the manufacturer. This device has been designed to produce decorative effect lighting and is
used in light show systems.
Stylish RGB 30cm LED-BALL containing91 high-powerLEDs.
Many applications possible:discotheques, DJs, hiring companies,exhibitionbooths,...
No flicker and very smooth RGB color changes thanks tohigh freq. dimming electronics
Different working modes:
Completely standalone: automatic or beat synchronized color changes (optional CA-8 controller
possible)
Master/slave mode: up to 16 units can be used together for wonderful preprogrammed, music
synchronizedlightshows.(optionalCA-8 controllerpossible)
DMX-controlled (4channels: R, G,B + Dimmer/strobe) by any standard DMX-controller.
Innovative and extremely quick DMX addressing:
Very easy DMX addressing of individual units using any standardDMX-controller
Extremely fastDMX addressing of several units at once (automatic address calculation)
Ready to use, all cables already connected!
Different installation possibilities for maximum flexibility:
Standard chain included (cfr.Mirror balls)
Optional polemount adapter.
Optional wallmount adapter.
LonglifeLED technology: >50.000 hours!
BEFORE USE
Before you start using this unit, please check if there’s no transportation damage. Should there be any, do
not usethedevice and consultyour dealer first.
Important:
This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is notsubject to warranty. The dealerwill not accept responsibilityfor any resulting defects
orproblemscaused by disregarding this user manual.
Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check thecontents:
Check that the carton contains the following items:
Operatinginstructions
LED BALL unit
Chain
M6 eyebolt
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
2/36 LED BALL INDOOR
SAFETY INSTRUCTIONS:
CAUTION: To reduce the risk of electric shock, do not remove the top cover.
No user-serviceable parts inside. Refer servicing to qualified service
personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use
or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
This symbol means: indoor use only.
Thissymbol means:Read instructions.
To protect the environment, please try to recycle the packing material as much as possible.
To prevent fire or shock hazard, do not exposethis appliance to rain ormoisture.
To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
This unit is for indoor useonly.
Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign
object enters theunit, immediately disconnect the mains power.
Prevent use in dusty environments and clean the unit regularly.
Keep the unit away from children.
Inexperienced persons should not operatethis device.
Maximum save ambienttemperature is 40°C. Don’t use this unit at higher ambient temperatures.
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
andservicing.
Always unplug the unit when it is not used for a longer time or during servicing.
The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
Check that the available voltage is not higher than the one stated on the rear panel of the unit.
The power cord should always be in perfectcondition: switch the unit immediately off when the power cord
is squashedor damaged.
Never let the power-cord come into contact with other cables!
This fixture must be earthed toin order comply with safety regulations.
Don’t connect the unit to any dimmer pack.
Always use an appropriateand certified safety cable when installing the unit.
In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user
serviceablepartsinside.
Never
repair a fuse or bypass the fuse holder.
Always
replace a damaged fuse with a fuse of the same
type and electrical specifications!
In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
The housing and the lenses must be replaced if theyare visibly damaged.
Please use theoriginal packing when the device is tobe transported.
Due to safety reasonsit is prohibited to makeunauthorized modifications to the unit.
Important:
Never look directlyinto the light source! Don’t use the effectin the presence of persons suffering
from epilepsy.
CAUTION
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
3/36 LED BALL INDOOR
DESCRIPTION:
1. 30cm plasticdome
2. Plasticbase
3. 230V Mains cable
4. DMXin/output cables with XLR connectors
5. 1m metal chain + metal eyebolt(included)
6. Automatic address button
7. Jack connector for the optional CA-8 controller
8. Pole mount adapter (optional)
9. Wall mount adapter (optional)
ELECTRICAL INSTALLATION + ADDRESSING
Important: The electrical installation should be carried out by qualified personal only,
according to the regulations for electrical and mechanical safety in your country.
Electrical installationfor 1 standalone unit:
Just insert themains cable. The unit startsworking immediately in stand-alone mode
Remark: You can connect a CA-8remote controller to the unit if you want tohave more control.
Electrical installation for twoor more unitsin master/slave:
Connect 2 to maximum 16 units together using good quality balanced microphone cables (like for
example JB Systems ref. 7-0063). The unit that has no cable connected to its DMX-input will react as
“master”, the others are the slave units.
Make sure that all units are connected to the mains.
Done!
Remark: You can connect a CA-8 remote controller to the master unit if you want to have more control
over the master/slave operation. You can also connect the LEDCON 01 remote controller, in this case all
units will respondequally(all units havethe samecolor)
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
4/36 LED BALL INDOOR
Electrical installationfor two or more units in DMX-mode:
The DMX-protocol is a widely
used high speed signal to
control intelligent light
equipment. You need to
“daisy chain” your DMX
controller and all the
connected units with a good
quality balanced cable (ex. JB
Systems ref. 7-0063).
To prevent strange behavior
of the light effects, due to
interferences, you must use a 90Ω to 120Ω terminator at the end of the chain.
Never use Y-splitter cables, this simply won’t work!
Make sure that all units are connected to the mains.
Each light effect in the chain needs to have its proper starting address so it knows
which commands from the controller it has to decode. In the next section you will
learn how to set the DMX addresses.
How to set theDMXaddresses:
There are 2 ways to set the DMX-address ofthe units
A. Setting individual DMX-addresses perprojector:
Make sure the DMXcables of all units are connected.
Connect the first unit to a universal DMX controller.
Connect all units to the mains so they are switched on.
Set all DMX-channels on your DMX-controller to zero (value 000).
Set the DMX-channel, that you want to assign as DMX-start address on you projector, tot
maximum (value255)
Press the“Auto DMX address” button (6) on the projector shortly.
If you want to set another projector to the same DMX-start address, simply press it’s “Auto DMX
address” button (6) and it will receive the same address.
Done!
An example to make thingsclear:
We will set the DMX start address of a projector to 106:
Connect the projector to the DMX-controller as described above and make sure all is switched
on.
Set all DMX-channels on the controllerto zero (000)
Now setDMX-channel 106 to maximum (255)
Press the“AutoDMXaddress” button (6) on the projector shortly.
Done! Your projectornowhas DMX address 106!
B. Automatic DMX-addressing,startingfromany givenstart address:
To save a lot of time (imagine the time it takes to set the DIP switches of 16 units…) you can set the
DMX addresses of all units in the DMX-chain just by the push of a button. No need to calculate the
starting address of each individual unit, this will be done for you!
Make sure the DMXcables of all units are connected.
Connect the first unit to a universal DMX controller.
Connect all units to the mains so they are switched on.
Set all DMX-channels on your DMX-controller to zero (value 000).
Set the DMX-channel, that you want to assign as DMX-start address on you projector, tot
maximum (value255)
Press the“Auto DMX address” button (6) on the first projector in the chain for about 5seconds.
Done! The first projector in the chain will receive the DMX-start address you chose and it will
automatically calculate and program the DMX addresses of all theother units in the DMX-chain!
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
5/36 LED BALL INDOOR
An example to make things clear:
We want to set the DMX-addresses of 16 units, the DMX start address of the first projector must
be 202:
Connect all projectors to the DMX-controller as described above and make sure all are switched
on.
Set all DMX-channels on the controllerto zero (000)
Now set DMX-channel 202 tomaximum (255)
Press the“AutoDMX address” button (6) on the first projector in the chain for about 5seconds.
Done! The first projector in the chain will receive DMX-start address 202 and it will
automatically calculate and program the DMX addresses of all the other units in the DMX-chain!
This means that the 2
nd
projector automatically receives address 206, the 3
rd
has address 210,
…, until the16
th
projector who automatically receives start address 262.
You just programmed 16 projectors,this took you about 10seconds!!!
Remark: you can mix the units with other DMX-effects that don’t have the automatic DMX-
addressing option. In that case you still have to set the DMX-addresses of these DMX-effects
manually!
OVERHEAD RIGGING
Important: The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
shouldbe used, the installed device should be inspected regularly for safety.
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
andservicing.
The device should be installed out of reach of peopleand outside areas where persons may walk by or be
seated.
Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s
weight.
Always use a certified safety cable that can hold 12times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
The device should be well fixed.
The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
3 different fixing methods are possible:
Fixed to ceiling or truss (1m chain included)
Wall fixing (optional wall adapter available)
Pole mount (optional adapter for poles up to D=60mmavailable)
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
6/36 LED BALL INDOOR
OPERATING INSTRUCTIONS
A. Standalone 1unit:
Just connect the unit to the mains and put on some music. The unit will start working automatically to
the rhythm of the music.
Remark: You canconnect aCA-8 remote controller to the unit if you want tohave more control.
B. Two or more units in master/slave setup:
Connect 2 to maximum 16 units together. Refer to the chapter “electrical installation” to learn how to
do this (don’t forget to address all units properly!)
Connect all units to the mains and put on some music. The units will start working automatically to the
rhythm of the musicand showthe internal chaseprograms.
Remark: You can connect a CA-8 remote controller to the master unit if you want to have more control
over themaster/slave operation.
C. Connect theoptional CA-8 controller formore control:
The CA-8 controller can only be used in standalone or master/slave mode. Connect the controller to the
CA-8input of the first unit (master). Now you can control all the connected units:
IMPORTANTREMARK:
When you use this LEDPROJECTOR with a CA-8 controller andyou select MANUAL mode
(mode LED= ON), the projector reminds the last setting used with controller, even after
disconnecting the controller and/or the mains voltage. If you don’t wantthis, make sure to
select another working mode (mode LED must blink or off) before you unplug the
controller.
BUTTON ACTIONS
STANDBY Toblackout allthe fixtures
FUNCTION
Strobe
1.Synchronousstrobe
in white color
2.The samecolor
chase
3.Different color
strobe
9 Color select
White
Red
Blue
Purple
Orange
Green
Yellow
Magenta
Cyan
Color Chase
1. Thesame color
2. Differentcolor
3. Onelight chase
4. Twolights chase
5. Four lights chase
Color Fade
1. Fastspeed
2.Middlespeed
3. Slowspeed
MODE
Sound 1
(LED OFF)
Manual
(LED ON)
Sound 2
(LED slow blinking)
Auto
(LED fast blinking)
D. Controlled byuniversal DMX-controller:
Connect all units together. Refer to
the chapter “Electrical installation for
two or more units in DMX-mode to
learn how to do this (don’t forget to
addressall units properly!)
Connect all units to the mains and
turn on the DMX controller.
Since each unit has its own DMX-
address, you can control them
individually. Remember that each unit
uses 4 DMX-channels as shown in the
DMX chart.
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
7/36 LED BALL INDOOR
MAINTENANCE
Make surethe area below the installation place is free from unwanted persons during servicing.
Switch off the unit and unplug themains cable.
During inspection the following points should be checked:
All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
When an optical part is visibly damaged due to cracks ordeep scratches, it must be replaced.
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
The cleaning of external optics must be carried outperiodically to optimize light output.Cleaning frequency
depends on the environment in which the fixture operates: damp, smoky or particularly dirty surroundings
can cause greater accumulation of dirt on the unit’s optics.
Clean with a soft cloth using normal glasscleaning products.
Always dry the parts carefully.
Clean the external optics at least once every 30 days.
SPECIFICATIONS
Mains Input: AC100V~240V50/60Hz
Fuse: 250V 2A slow blow(20mm glass)
SoundControl: Internal microphone
DMXconnections: XLR3pin
LEDs: 91 high powerLEDs (R31 + G30 + B30)
Size: seedrawing below
Weight: 1,5kg
Every information is subject to change withoutprior notice
You can download the latest version of this user manual on our website: www.beglec.com
FRANÇAIS MODE D’EMPLOI
JB SYSTEMS
®
8/36 LED BALL INDOOR
Merci d’avoir choisi ce produit JBSystems
®
. Pour votre curité et pour une utilisation optimale de toutes les
possibilités de l’appareil, lisez attentivementcette notice avant utilisation.
EN VOUS INSCRIVANT POUR LA LETTRE D’INFORMATION VOUS SEREZ TOUJOURS
TENU AU COURANT DES DERNIERES NOUVELLES CONCERNANT NOS PRODUITS:
NOUVEAUTES, ACTIONS SPECIALES,JOURNEES PORTES OUVERTES, ETC.
SURFEZ SUR: WWW.BEGLEC.COM
CARACTERISTIQUES
Cet appareil ne produit pas d’interférences radio. Il répond aux exigences nationales et européennes. La
conformité a été établieet les déclarationset documents correspondants ont été déposés par le fabricant.
Cet appareil a é conçu pour la production d’effets lumière décoratifs et est utilisé dans des spectacles
lumineux.
LED-BALL Stylée RGB 30cm contenant 91 LEDs dehaute puissance.
Beaucoup d’applications possible:discothèques,DJs, compagnies delocation, expositions,...
Changement de couleur RGBtrès fluide grâceà la hautefréquence de l’électronique du variateur.
Différents modes de fonctionnement:
Fonctionnement autonome: automatique ou changement des couleurs synchroni avec la musique
(commande à distance CA-8 en option possible)
Mode maître/esclave: jusqu’à 16 appareils peuvent êtres utilisés ensemble pour un superbe spectacle
lumière préprogrammé et synchronisé avec la musique. (commande à distance CA-8 en option
possible)
Contrôlé par DMX (4canaux: R, G, B + Variateur/stroboscope) par n’importe quel contrôleur DMX
standard.
Adressage DMX innovateur et extrêmement rapide:
Adressage DMX très facile des projecteurs individuels par n’importequel contrôleurDMXstandard !
AdressageDMX extrêmement rapide de plusieurs projecteurs (calcul automatique des adresses DMX)
Prêtpour un usageimmédiat, tous les câbles sont déjà reliés !
Différentes possibilités d’installation pour une flexibilité maximale:
Chaîne standardinclus (voir : Boulesà facettes)
Adaptateur en option pour un montagesur poteau.
Adaptateur en option pour un montage sur mur.
Technologie longueduréede vie desLEDs: >50.000heures!
AVANT UTILISATION
Avant d’utiliser cet appareil, assurez-vous de l’absence de dommage lié au transport. En cas
d’endommagement,n’utilisez pas l’appareiletcontactez levendeur.
Important: Cet appareil a quitté notre usine en parfaite condition et bien emballé. Il est primordial que
l’utilisateur suive les instructions de sécurité et avertissements inclus dans ce manuel. La garantie ne
s’applique pas en cas de dommage l à une utilisation incorrecte. Le vendeur ne prend pas la
responsabilité des défauts ou de tout problème résultant du fait de n’avoir pas tenu compte des mises en
garde de ce manuel.
Conservez ce manuel dans un endroit sûr pour toute consultation future. Si vous vendez l’appareil,
assurez-vous d’y joindre cemanuel également.
Vérifiez le contenu:
Vérifiez si l’emballage contient les articles suivants:
Mode d'emploi
Appareil LED BALL
Chaînette
Vise à anneau M6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

JBSYSTEMS LED BALL INDOOR Owner's manual

Category
Stroboscopes & disco lights
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI