Speakman S-1183 Installation guide

Speakman
Brand
Speakman
Model
S-1183
Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

Instructions for Models:
S-1183
Need Help?
For additional assistance or service call:
SPEAKMAN Company
400 Anchor Mill Road
New Castle, DE 19720
PHONE: 800-537-2107
EMAIL: customerservice@speakmancompany.com
WEB: www.speakmancompany.com
92-S-1183-R2
Clean wall surface. Place Mounng Base①,
on to valve, align mounng holes, and secure with
Mounng Screws②.
③
What You Need To Know:
Tools:
Required:
*Adjustable
Wrench
*Groove Joint
Plier
*Phillips
Screwdriver
*Thread Seal Tape
Helpful:
*Supply Lines *Basin Wrench
*Pipe Wrench *Hacksaw *Tubing Cutter
*Utility Knife *Eye Protection
Important Notes:
Be sure to read instructions thoroughly before
beginning installation. Do not overtighten any
connections or damage may occur. This valve
has an operating range of 20-80 psi.
Safety Tips:
Cover your drain to prevent loss of parts.
Be sure to wear eye protection while cutting pipe.
Maintenance:
Your new Faucet is designed for years of
trouble-free performance. Keep it looking new by
cleaning it periodically with a soft cloth. Avoid
abrasive cleaners, steel wool and harsh chemicals
as these will dull the finish and void your warranty.
What You Need To Know:
①
Verify that the hole sizes and posions of
holes in the wall are correct.
① Shower and / or handshower outlet hole:
1.25" diameter.
②Valve access hole: 2" diameter.
③Recommended valve depth to finished wall:
2.5" min. to 3.5" max.
●Shut off water supply.
●Be sure to posion the valve body correctly in wall.
The marking “S” should be facing upward
●Wrap thread seal tape around all pipe threads in a
clockwise direcon.
●Connect water supplies to valve body inlets.
●Connect shower outlet pipe② and / or
handshower③ outlet pipe to valve body.
●Connect pipe elbow①(not included) to the end
of the pipe.
②
2" Dia
1.25" Dia
④
Align Handle Assembly ① with connector and
Escutcheon. Keep Handle in a staonary vercal
posion as you thread Handle Hub ② on to
Mounng
Base. Tighten unl snug.
SUPPLY CONNECTION LAYOUT
①
②
1/2" NPT OUTLET
1/2" NPT OUTLET
1/2" NPT INLET
1
2
3
"S" MARKING TO FACE UP
X3
1
2
2
1
2
6
1
3
4
5
4.37''
[111.12mm]
2.77''
[70.48mm]
2.98''
[75.78mm]
2.75''
[69.85mm]
2.92''
[74.17mm]
2.5"-3.5"
[64.77mm-67.31mm]
RPG05-0897
RPG05-0939
RPG04-0435
1
3
4
5
6
PRODUCT DIMENSIONS
REPAIR PARTS
½” NPT OUTLET
½” NPT INLET
  • Page 1 1
  • Page 2 2

Speakman S-1183 Installation guide

Speakman
Brand
Speakman
Model
S-1183
Category
Sanitary ware
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents