KTM 450 SMR User manual

Category
Motorcycles
Type
User manual
OWNER'S MANUAL 2008
450SMR
ART. NO. 3211243en
DEAR KTM CUSTOMER 1
'($5 .70 &86720(5
Congratulations on your decision to purchase a KTM motorcycle. You are now the owner of a state-of-the-art sports motorcycle that will
give you enormous pleasure if you service and maintain it accordingly.
We wish you great pleasure riding the vehicle!
Enter the serial numbers of your vehicle below.
Chassis number ( P. 9) Dealer's stamp
Engine number ( P. 9)
The owner's manual corresponded to the latest state of this series at the time of printing. Slight deviations resulting from continuing
development and design of our motorcycles can however not be completely excluded.
All specifications are not binding. KTM Sportmotorcycle AG in particular reserves the right to modify or delete technical specifica-
tions, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice and without specifying reasons, to adapt
these to local conditions, as well as to stop prudction of a particular model without prior notice. KTM accepts no liability for delivery
options, deviations from illustrations and descriptions, as well as printing and other errors. The models portrayed partly contain special
equipment that does not belong to the regular scope of delivery.
© 2007 by KTM-Sportmotorcycle AG, Mattighofen Austria
All rights reserved
Reproduction, even in part, is permitted only with the express written permission of the copyright owner.
ISO 9001(12 100 6061)
Within the meaning of the international quality management standard ISO 9001, KTM uses quality assurance processes
that lead to the maximum possible quality of the products.
Issued by: TÜV Management Service
KTM-Sportmotorcycle AG
5230 Mattighofen, Austria
CONTENTS 2
&217(176
MEANS OF REPRESENTATION ............................................ 4
IMPORTANT NOTES............................................................ 5
VIEW OF VEHICLE............................................................... 7
View of vehicle, front left side........................................... 7
View of vehicle, rear right side .......................................... 8
LOCATION OF SERIAL NUMBERS ........................................ 9
Chassis number............................................................... 9
Type label....................................................................... 9
Engine number................................................................ 9
Fork part number............................................................. 9
Shock absorber part number............................................. 9
OPERATING ELEMENTS.................................................... 10
Clutch lever .................................................................. 10
Hot start lever ............................................................... 10
Hand brake lever ........................................................... 10
Short circuit button ....................................................... 10
Electric starter button .................................................... 10
Fuel tap........................................................................ 11
Opening filler cap.......................................................... 11
Closing filler cap ........................................................... 11
Choke........................................................................... 11
Shift lever..................................................................... 12
Foot brake pedal ........................................................... 12
Plug-in stand ................................................................ 12
GENERAL TIPS AND HINTS ON PUTTING INTO
OPERATION...................................................................... 13
Advice on first use......................................................... 13
Running in the engine.................................................... 14
RIDING INSTRUCTIONS .................................................... 15
Checks before putting into operation ............................... 15
Starting ........................................................................ 15
Starting up ................................................................... 16
Shifting, riding.............................................................. 16
Braking ........................................................................ 16
Stopping, parking .......................................................... 16
Refueling...................................................................... 17
GREASING AND SERVICE TABLE ....................................... 18
Important maintenance work to be carried out by an
authorized KTM workshop. ............................................. 18
Important maintenance work to be carried out by an
authorized KTM workshop. (as additional order)................ 19
Important checks and maintenance work to be carried
out by the rider. ............................................................ 19
MAINTENANCE WORK ON CHASSIS AND ENGINE.............. 21
Jacking up the motorcycle.............................................. 21
Removing the motorcycle from the work stand.................. 21
Checking the basic chassis setting with the rider's
weight .......................................................................... 21
Compression damping of shock absorber.......................... 21
Adjusting high-speed compression damping of the shock
absorber ....................................................................... 21
Adjusting the low-speed compression damping of the
shock absorber .............................................................. 22
Adjusting rebound damping of the shock absorber ............ 22
Measuring rear wheel sag unloaded ................................. 23
Checking static sag of the shock absorber ........................ 23
Check the riding sag of the shock absorber. ..................... 23
Adjusting spring preload of the shock absorber
x ............ 24
Adjusting riding sag
x .................................................. 24
Removing the shock absorber
x..................................... 25
Installing shock absorber
x ........................................... 25
Checking basic setting of fork ......................................... 25
Adjusting compression damping of fork ........................... 25
Adjusting rebound damping of fork.................................. 26
Bleeding fork legs.......................................................... 26
Cleaning dust boots of fork legs ...................................... 26
Removing the fork protector............................................ 27
Installing the fork protector ............................................ 27
Checking play of steering head bearing............................ 27
Adjusting play of steering head bearing
x....................... 28
Fork offset .................................................................... 28
Setting the fork offset
x ............................................... 29
Removing the fork legs
x .............................................. 29
Installing the fork legs
x............................................... 29
Removing the lower triple clamp
x ................................ 30
Installing the lower triple clamp
x ................................. 30
Greasing the steering head bearing
x ............................. 31
Dismounting the front fender.......................................... 31
Installing the front fender............................................... 31
Dismount the start number plate..................................... 32
Fitting the start number plate ......................................... 32
Handlebar position ........................................................ 32
Adjusting handlebar position
x...................................... 32
Checking gas Bowden cable route ................................... 33
Checking play in the gas Bowden cable ........................... 33
Adjusting the gas Bowden cable play
x .......................... 33
Checking chain dirt ....................................................... 34
Cleaning the chain......................................................... 34
Checking the chain tension ............................................ 34
Checking the chain tension when fitting rear wheel........... 35
Checking the rear sprocket / engine sprocket for wear ....... 35
Checking chain wear...................................................... 35
Adjusting the chain tension ............................................ 36
Adjusting chain tension - after checking .......................... 37
Adjusting chain tension - fitting rear wheel ...................... 37
Adjusting chain guide
x ............................................... 38
Brake fluid reservoir....................................................... 38
Brake calipers ............................................................... 38
Checking brake discs ..................................................... 38
Checking free play of hand brake lever............................. 39
Adjusting basic position of handbrake lever...................... 39
Checking front brake fluid level....................................... 39
Topping up the front brake fluid
x................................. 40
Checking the front brake linings...................................... 40
Removing front brake linings
x...................................... 41
Mounting front brake linings
x ...................................... 41
Changing the front brake linings
x................................. 42
Checking free play of foot brake lever .............................. 43
Adjusting basic position of footbrake lever
x................... 43
Checking the rear brake fluid level .................................. 43
Adding rear brake fluid
x.............................................. 44
Checking rear brake linings ............................................ 44
Removing rear brake linings
x....................................... 45
Installing the rear brake linings
x .................................. 45
Changing the rear brake linings
x .................................. 46
Removing front wheel
x................................................ 46
Fitting front wheel
x .................................................... 47
Removing rear wheel
x ................................................. 48
Fitting rear wheel
x...................................................... 48
Tire condition checking.................................................. 49
Checking tire air pressure............................................... 49
Checking spoke tension.................................................. 50
Removing the battery
x ................................................ 50
CONTENTS 3
Installing the batteryx ................................................. 50
Recharging the battery
x .............................................. 51
Removing a fuse............................................................ 52
Replacing the fuse......................................................... 52
Ignition curve plug connection........................................ 52
Changing the ignition curve ............................................ 52
Removing the seat ......................................................... 53
Mounting the seat ......................................................... 53
Dismounting the fuel tank
x ......................................... 53
Installing the fuel tank
x .............................................. 54
Cooling system .............................................................. 55
Checking antifreeze and coolant level .............................. 55
Checking the coolant level.............................................. 55
Draining coolant
x ....................................................... 56
Refilling coolant
x ....................................................... 56
Removing main silencer ................................................. 57
Fitting the main silencer ................................................ 57
Glass fiber yarn filling of main silencer ............................ 57
Removing glass fiber yarn filling of main silencer
x......... 57
Fitting glass fiber yarn filling of main silencer
x.............. 58
Changing glass fiber yarn filling of main silencer
x.......... 58
Dismounting the air filter box lid..................................... 58
Installing the air filter box lid.......................................... 58
Removing the air filter
x............................................... 58
Installing the air filter
x ............................................... 59
Cleaning air filter
x...................................................... 59
Adjusting basic position of clutch lever............................ 59
Checking fluid level of hydraulic clutch ........................... 60
Changing fluid level of hydraulic clutch
x ...................... 60
Carburetor - idle ............................................................ 61
Carburetor - adjusting idle
x ......................................... 61
Emptying the carburetor float chamber
x ....................... 62
Checking engine oil level................................................ 62
Changing engine oil and oil filter, cleaning oil screen
x ... 63
Draining engine oil
x.................................................... 63
Cleaning the oil screen
x .............................................. 63
Removing the oil filter
x............................................... 64
Mounting oil filter
x ..................................................... 64
Filling up with engine oil
x ........................................... 64
Topping up engine oil .................................................... 65
TROUBLESHOOTING......................................................... 66
CLEANING........................................................................ 68
Cleaning motorcycle ...................................................... 68
STORAGE ......................................................................... 69
Storage......................................................................... 69
Putting into operation after storage ................................. 69
TECHNICAL DATA - ENGINE.............................................. 70
Capacity - engine oil ...................................................... 70
Capacity - coolant.......................................................... 70
TECHNICAL DATA - ENGINE TIGHTENING TORQUES.......... 71
TECHNICAL DATA - CARBURETOR..................................... 73
TECHNICAL DATA - CHASSIS ............................................ 74
Capacity - fuel............................................................... 75
TECHNICAL DATA - FORK.................................................. 76
Capacity - fork oil .......................................................... 76
TECHNICAL DATA - SHOCK ABSORBER ............................. 77
TECHNICAL DATA - CHASSIS TIGHTENING TORQUES ........ 78
WIRING DIAGRAM ............................................................ 80
Wiring diagram.............................................................. 80
SUBSTANCES................................................................... 82
AUXILIARY SUBSTANCES.................................................. 84
STANDARDS..................................................................... 86
INDEX .............................................................................. 87
MEANS OF REPRESENTATION 4
0($16 2) 5(35(6(17$7,21
Symbols used
The symbols used are explained in the following.
Indicates an expected reaction (e.g. of a work step or a function).
Indicates an unexpected reaction (e.g. of a work step or a function).
All work marked with this symbol requires specialist knowledge and technical understanding. In the interest of
your own safety, have these jobs done in an authorized KTM workshop! There, your motorcycle will be serviced
optimally by specially trained experts using the specialist tools required.
Identifies a page reference (more information is provided on the specified page).
Formats used
The typographical and other formats used are explained in the following.
Specific name Identifies a specific name.
Name
®
Identifies a protected name.
Brand™ Identifies a brand in merchandise traffic.
IMPORTANT NOTES 5
,03257$17 127(6
Use definition
KTM sport motorcycles are designed and built to withstand the normal stresses and strains of competitive use. The motorcycles com-
ply with currently valid regulations and categories of the top international motorsport organizations.
Info
The motorcycle must be used only on secluded property remote from public road traffic.
Maintenance
A prerequisite for perfect operation and prevention of wear is that the engine and chassis maintenance and adjustment work described
in the owner's manual are properly carried out. Poor adjustment and tuning of the engine and chassis can lead to damage and break-
age of components.
Using the motorcycle in extreme conditions such as very muddy or wet terrain can lead to above-average wear of components such as
the transmission train or the brakes. For this reason, it may be necessary to service or replace worn parts before the limit specified in
the greasing and service table is reached.
Pay careful attention to the prescribed running-in period, inspection and maintenance intervals. If you observe these exactly, you will
ensure a much longer service life for your motorcycle.
Warranty
The maintenance work prescribed in the greasing and service table must be carried out in an authorized KTM workshop and confirmed
in the customer's service record, since otherwise no warranty claims will be recognized. No warranty claims can be considered for
damage resulting from manipulations and alterations to the motorcycle.
Fuel, oils, etc.
You should use the fuels, oils and greases according to specifications as listed in the owner's manual.
Spare parts, accessories
For your own safety, use only spare parts and accessories approved by KTM. KTM accepts no liability for other products and any re-
sulting damage or loss.
Transport
Note
Danger of damageDanger of damage by the vehicle running away or falling over.
Always place the vehicle on a firm and even surface.
Note
Fire hazardSome components (engine, radiator and exhaust system) get very hot when the engine is running.
Do not place the vehicle where there are flammable or explosive substances.
switch off engine.
Turn the handle
of the fuel tap to theOFF position.
Use straps or other suitable devices to secure the motorcycle against accidents or falling over.
Environment
Offroad motorcycling is a wonderful sport and we naturally hope that you will be able to enjoy it to the fullest. However, it is a poten-
tial problem for the environment and can lead to conflicts with other persons. But if you use your motorcycle responsibly, you can en-
sure that such problems and conflicts do not have to occur. To protect the future of motorcycle sport, make sure that you use your mo-
torcycle legally, display environmental consciousness, and respect the rights of others.
Warning notes
In your own interest, read the specified warning notes.
Info
Various warning labels are attached to your vehicle. Do not remove any warning labels. If they are missing, you or others may
not recognize dangers and may therefore be injured.
IMPORTANT NOTES 6
Grades of risks
Danger
Danger that leads immediately and certainly to severe and permanent injury or death.
Warning
Danger that will probably lead to severe and permanent injury or death.
Note
Danger of serious damage to machine or material.
Warning
Risk of environmental damage.
OWNER'S MANUAL
Read this owner's manual carefully and completely before making your first trip. It contains a lot of information and tips to help
you operate and handle your motorcycle. Only then will you find out how to customize the motorcycle ideally for your own use and
how you can protect yourself from injury. The owner's manual also contains important information on servicing the motorcycle.
The owner's manual is an important component of the motorcycle and should be handed over to the new owner if the vehicle is
sold.
VIEW OF VEHICLE 7
9,(: 2) 9(+,&/(

View of vehicle, front left side
500182-10
1 Hand brake lever
2 Start number plate
3 Front fender
4 Front wheel
5 Fork part number
6 Oil filter cover
7 Plug-in stand
8 Shift lever
9 Choke button
10 Air filter
11 Filler cap
12 Clutch lever
VIEW OF VEHICLE 8
View of vehicle, rear right side
500183-10
1 Main silencer
2 Shock absorber
3 Brake caliper of rear wheel brake
4 Rear wheel
5 Foot brake pedal
6 Manifold
7 Chassis number/type label
8 Throttle grip
LOCATION OF SERIAL NUMBERS 9
/2&$7,21 2) 6(5,$/ 180%(56

Chassis number
400193-10
The chassis number is stamped on the steering head on the right.
Type label
400284-10
The type label is fixed to the front of the steering head.
Engine number
400194-10
The engine number is stamped on the left side of the engine under the engine
sprocket.
Fork part number
500175-10
The fork part number is stamped on the inner side of the fork stub.
Shock absorber part number
500083-10
The shock absorber part number is stamped on the top of the shock absorber above
the adjusting ring on the engine side.
OPERATING ELEMENTS 10
23(5$7,1* (/(0(176

Clutch lever
400195-10
The clutch lever is fitted on the left side of the handlebar.
The clutch is hydraulically operated and self-adjusting.
Hot start lever
400195-12
The hot start lever is fitted on the left side of the handlebar.
If you pull the hot start lever to the handlebar during the start procedure, a bore is
opened in the carburetor through which the engine can draw in extra air. This gives a
leaner fuel-air mixture, which is needed for a hot start.
Possible states
Hot start function activated ಥHot start lever is pulled out to the stop.
Hot start function deactivated ಥHot start lever is pushed back to the stop.
Hand brake lever
500176-10
The hand brake lever is located on the right side of the handlebar and operates the
front wheel brake.
Short circuit button
400197-10
The short circuit button is fitted on the left side of the handlebar.
Possible states
Short circuit button in basic position ಥIn this position, the ignition circuit is
closed, and the engine can be started.
Short circuit button pressed ಥIn this position, the ignition circuit is interrupted,
a running engine stops, and a non-running engine will not start.
Electric starter button
500177-10
The electric starter button is fitted on the right side of the handlebar.
Possible states
Electric starter button in basic position
Electric starter button pressed ಥIn this position, the electric starter is actuated.
OPERATING ELEMENTS 11
Fuel tap
500178-10
With the tap handle on the fuel tap, you can open or close the supply of fuel to the
carburetor.
Possible states
Fuel supply closed OFF ಥNo fuel can flow from the tank to the carburetor.
Fuel supply open ON ಥFuel can flow from the tank to the carburetor. The fuel tank
empties completely.
Opening filler cap
400199-10
Press release button, turn filler cap counterclockwise and lift it free.
Closing filler cap
400199-11
Replace the filler cap and turn clockwise until the release button locks in place.
Info
Run the fuel tank breather hose without kinks.
Choke
500179-10
The choke is fitted on the left side of the carburetor.
Activating the choke function frees an opening through which the engine can draw ex-
tra fuel. This gives a richer fuel-air mixture, which is needed for a cold start.
Info
If the engine is warm, the choke function must be deactivated.
Possible states
Choke function activated ಥThe choke lever is pulled out to the stop.
Choke function activated ಥThe choke lever is pushed in to the stop.
OPERATING ELEMENTS 12
Shift lever
400204-12
The shift lever is mounted on the left side of the engine.
400204-11
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
Foot brake pedal
400205-10
The foot brake pedal is located in front of the right footrest and operates the rear
wheel brake.
Plug-in stand
500180-10
Note
Danger of damageDanger of damage by the vehicle running away or falling over.
Always place the vehicle on a firm and even surface.
To stand the motorcycle, plug the plug-in stand
into the left side of the wheel spin-
dle.
Info
Before riding, remove the plug-in stand.
GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION 13
*(1(5$/ 7,36 $1' +,176 21 3877,1* ,172 23(5$7,21

Advice on first use
Danger
Danger of accidentsDanger from inadequate traffic experience.
Do not use the vehicle if you are inexperienced or if you have consumed alcohol or drugs.
Warning
Risk of injuryRisk of injury by missing/inadequate protective clothing.
Wear protective clothing (helmet, boots, gloves, pants and jacket with protectors) every time you ride the vehicle.
Warning
Danger of accidentsCritical riding behavior due to inappropriate riding.
Adapt your riding speed to the road conditoins and your riding ability.
Warning
Danger of accidentsAccident risk caused by presence of a passenger.
Your vehicle is not designed to carry passengers. Do not ride with a passenger.
Warning
Danger of accidentsBrake system failure.
If the foot brake pedal is not released, the brake linings drag permanently. The rear brake can fail due to overheating. Take
your foot off the foot brake pedal if you do not want to brake.
Warning
Danger of accidentsUnstable riding behavior.
Do not exceed the maximum permitted weight and axle loads.
Warning
Risk of misappropriationUsage by unauthorized persons.
Never leave the vehicle while the engine is running. Secure the vehicle against use by unauthorized persons.
Info
When using your motorcycle, remember that others may feel disturbed by excessive noise.
Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
Before your first trip, read the entire operating instructions carefully.
Get to know the operating elements.
adjust the basic position of clutch lever. ( P. 59)
adjust the basic position of handbrake lever. ( P. 39)
Adjust the basic position of the footbrake lever. ( P. 43)
Get used to handling the motorcycle on a suitable piece of land before making a longer trip.
Info
Your motorcycle is not licensed for use on public roads.
Try also to ride as slowly as possible and in a standing position to get a better feeling for the vehicle.
Do not make any trips that over-stress your ability and experience.
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
Do not make any changes to the motorcycle, and use only KTM approved parts.
Do not carry any baggage.
Info
Motorcycles react sensitively to any changes of weight distribution.
Do not exceed the overall maximum permitted weight and the axle loads.
Specification
Maximum permissible overall weight 335kg (738.54lb.)
Maximum permissible front axle load 145kg (319.67lb.)
Maximum permissible rear axle load 190kg (418.87lb.)
Run the engine in.
GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION 14
Running in the engine
During the running-in phase, do not exceed the specified engine speed and engine performance.
Specification
Maximum engine speed
During the first 3 service hours 7000rpm
Maximum engine performance during the running-in period
During the first 3 service hours 싨50%
During the next 12 service hours 싨75%
Avoid fully opening the throttle!
RIDING INSTRUCTIONS 15
5,',1* ,16758&7,216

Checks before putting into operation
Info
Make sure that the motorcycle is in a perfect technical condition before use.
Info
In the interests of riding safety, make a habit of making a general check before you ride.
Check the engine oil level. ( P. 62)
Check the chain tension. ( P. 34)
Check the chain dirt accumulation. ( P. 34)
Check the tire condition. ( P. 49)
Checking the tire air pressure. ( P. 49)
Check the front brake brake fluid level. ( P. 39)
Check the rear brake fluid level. ( P. 43)
Check the front brake linings. ( P. 40)
Check the rear brake linings. ( P. 44)
Check brake system function.
Check the coolant level. ( P. 55)
Check that all operating elements are correctly adjusted and free to move.
Starting
Danger
Danger of poisoningExhaust gases are poisonous and can result in unconsciousness and/or death.
When running the engine, always make sure there is sufficient ventilation, and do not start or run the engine in a closed
space.
Note
Engine failureHigh engine speeds in cold engines have a negative effect on the service life of the engine.
Always warm up the engine at low engine speeds.
Info
If the motorcycle is unwilling to start, the cause can be old fuel in the float chamber. The flammable elements of the fuel
evaporate after a long time of standing.
If the float chamber is filled with fresh fuel, the engine starts immediately.
Press the starter for a maximum of 5 seconds. Wait for a least 5 seconds until trying again.
Conditions
Motorcycle standing still: 싩1week
Empty the carburetor float chamber. ( P. 62)
Turn the handle
of the fuel tap to theON position. (Figure500178-10 P. 11)
Fuel can flow from the tank to the carburetor.
Remove the motorcycle from the stand.
Shift gear to neutral.
Conditions
Engine cold
Pull choke lever out as far as possible.
Conditions
Engine warm
Pull the hot start lever out to the stop.
Press the electric starter button.
Info
Don't open the throttle.
Conditions
Engine hot and running
Push back the hot start lever to the stop with the engine running.
RIDING INSTRUCTIONS 16
Starting up
Pull the clutch lever, engage 1st gear, release the clutch lever slowly and simultaneously open the throttle carefully.
Shifting, riding
Warning
Danger of accidentsIf you change down at high engine speed, the rear wheel can lock up.
Do not change into a low gear at high engine speed. The engine races and the rear wheel can block.
Info
If you hear unusual noises while riding, stop immediately, switch off the engine and contact an authorized KTM workshop.
First gear is used for starting off or for steep inclines.
When conditions allow (incline, road situation, etc.), you can shift into a higher gear. To do so, release the throttle while simulta-
neously pulling the clutch lever, shift into the next gear, release the clutch and open the throttle.
If the choke function was activated, deactivate it after the engine has warmed up.
When you reach maximum speed after fully opening the throttle, turn back the throttle to about 3/4 of its range; the speed hardly
drops, but the fuel consumption falls considerably.
Always open the throttle only as much as the engine can handle abrupt throttle opening increases fuel consumption.
To shift down, brake if necessary and close the throttle at the same time.
Pull the clutch lever and shift into a lower gear, release the clutch lever slowly and open the throttle or shift again.
Switch off the engine if you expect to be standing for a long time.
Specification
싩2min
Avoid frequent and longer slipping of the clutch. This heats the engine oil, the engine and the cooling system.
Ride with a lower engine speed instead of with a high engine speed and a slipping clutch.
Braking
Warning
Danger of accidentsIf you brake too hard, the wheels can lock.
Adapt your braking to the traffic situation and the road conditions.
Warning
Danger of accidentsReduced braking caused by spongy pressure point of front or rear brake.
Have the brake system checked in an authorized KTM workshop, and do not ride any further.
Warning
Danger of accidentsReduced braking due to wet or dirty brakes.
Clean or dry dirty or wet brakes by riding and braking gently.
On sandy, wet or slippery surfaces, use the rear brake.
Braking should always be completed before you go into a bend. Change down to a lower gear appropriate to your road speed.
On long downhill stretches, use the braking effect of the engine. Change down one or two gears, but do not overstress the engine.
In this way, you have to brake far less and the brakes do not overheat.
Stopping, parking
Warning
Danger of burnsSome vehicle components get very hot when the machine is driven.
Do not touch hot components such as exhaust system, radiator, engine, shock absorber and brakes. Allow these compo-
nents to cool down before starting work on them.
Note
Danger of damageDanger of damage by the vehicle running away or falling over.
Always place the vehicle on a firm and even surface.
AA
RIDING INSTRUCTIONS 17
Note
Fire hazardSome components (engine, radiator and exhaust system) get very hot when the engine is running.
Do not place the vehicle where there are flammable or explosive substances.
Brake the motorcycle.
Shift gear to neutral.
Press the short circuit button when the engine is idling until the engine stops.
Turn the handle
of the fuel tap to theOFF position. (Figure500178-10 P. 11)
Stand the motorcycle on a hard surface.
Refueling
Danger
Fire hazardFuel can easily catch fire.
Never fill up the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
Fuel in the fuel tank expands when warm and can escape if the tank is overfilled. See specifications on filling up with fuel.
Warning
Danger of poisoningFuel is poisonous and a health hazard.
Avoid contact between fuel and skin, eyes and clothing. Do not inhale fuel vapors. If fuel gets into your eyes, rinse imme-
diately with water and contact a doctor. Wash affected skin areas immediately with soap and water. If fuel is swallowed,
contact a doctor immediately. Change clothing that has come into contact with fuel.
Warning
Environmental hazardImproper handling of fuel is a danger to the environment.
Do not allow fuel to get into the ground water, the ground, or the sewage system.
400382-10
Open the filler cap. ( P. 11)
Fill the fuel tank with fuel up to measurement
.
Specification
Measurement of
35mm (1.38in)
Tank capacity 8.2l
(2.17USgal)
Super unleaded (ROZ 95 / RON 95 /
PON 91) ( P. 82)
Close the filler cap. ( P. 11)
GREASING AND SERVICE TABLE 18
*5($6,1* $1' 6(59,&( 7$%/(

Important maintenance work to be carried out by an authorized KTM workshop.
S3N S10A S30A
Engine Change the engine oil and oil filter, and clean the oil screen. ( P. 63)
Replace spark plug.
Check and adjust valve clearance.
Check engine mounting screws for tightness.
Clean spark plug connectors and check for tightness.
Check screw of shift lever for tightness.
Carburetor Check carburetor connection boots for cracks and leakage.
Check vent hoses for damage and routing without sharp bends.
Check idle. ••
Attachments Check the cooling system for leakage.
Check the antifreeze and coolant level. ( P. 55)
Check the exhaust system for leakage and looseness.
Check Bowden cables for damage, smooth operation and routing without sharp
bends.
••
Check the fluid level of the hydraulic clutch. ( P. 60)
Clean the air filter. ( P. 59)
Check cables for damage and routing without sharp bends.
Brakes Check the front brake linings. ( P. 40)
Check the rear brake linings. ( P. 44)
Check the brake discs. ( P. 38)
Check the front brake brake fluid level. ( P. 39)
Check the rear brake fluid level. ( P. 43)
Check brake lines for damage and leakage.
Check the free play of the hand brake lever. ( P. 39)
Check the free play of the foot brake lever. ( P. 43)
Check brake system function.
Check screws and guide bolts of brake system for tightness.
Chassis Check shock absorber and fork for leakage and functioning.
Clean dust boots of fork legs. ( P. 26)
Bleed fork legs. ( P. 26)
Check swingarm bearing.
Check play of steering head bearing. ( P. 27)
Check all screws to see if they are tight.
Wheels Check the spoke tension. ( P. 50)
Check rim run-out.
Check the tire condition. ( P. 49)
Checking the tire air pressure. ( P. 49)
Check the chain wear. ( P. 35)
Check the chain tension. ( P. 34)
Clean the chain. ( P. 34)
Check wheel bearing for play.
Clean and grease adjusting screws of chain adjuster.
S3N: After 3 service hours - corresponds to about 21 liters of fuel
S10A: Every 10 service hours - corresponds to about 70 liters of fuel / after every race
S30A: Every 30 service hours - corresponds to about 210 liters of fuel
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91

KTM 450 SMR User manual

Category
Motorcycles
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI