Panasonic 1AG6P1P6073-S User manual

Before connecting, operating or adjusting this product, please read the

instructions completely.

Spanish Quick Use Guide is included.

Guía para rápida consulta en español está incluida.

Operating Instructions

High Definition Mobile Camera

Model No. HM-TA1

VQT2Z95-1

1AG6P1P6073-A(S)

until

2010/08/03

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,

contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

PP

HM-TA1_PP-VQT2Z95_mst.book 1 ページ２０１０年７月２７日　火曜日　午後９時２０分

2 VQT2Z95

Things You

Should Know

Thank you for choosing

Panasonic!

You have purchased one

of the most sophisticated

and reliable products on

the market today. Used

properly, we’re sure it will

bring you and your family

years of enjoyment. Please take time to fill in the information on the right.

The serial number is on the tag located on the underside of your camera.

Be sure to retain this manual as your convenient camera information

source.

Safety Precautions

WARNING:

TO REDUCE THE RISK OF FIRE OR PRODUCT DAMAGE,

≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,

DRIPPING OR SPLASHING AND THAT NO OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE

PLACED ON THE APPARATUS.

≥ USE ONLY THE RECOMMENDED ACCESSORIES.

≥

DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO

USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

HM-TA1_PP-VQT2Z95_mst.book 2 ページ２０１０年７月２７日　火曜日　午後９時２０分

VQT2Z95 3

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

THE FOLLOWING APPLIES ONLY IN CANADA.

FCC Note:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

≥ Reorient or relocate the receiving antenna.

≥ Increase the separation between the equipment and receiver.

≥ Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

≥ Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the

attached installation instructions and use only

shielded interface cables with ferrite core when

connecting to computer or peripheral devices.

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

Declaration of Conformity

Trade Name: Panasonic

Model No.: HM-TA1

Responsible party: Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Support Contact: Panasonic Consumer Electronics Company

1-800-211-PANA (7262)

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

HM-TA1_PP-VQT2Z95_mst.book 3 ページ２０１０年７月２７日　火曜日　午後９時２０分

4 VQT2Z95

Battery pack (Lithium ion battery pack)

≥ Use the specified unit to recharge the battery pack.

≥ Do not use the battery pack with equipment other than the specified

unit.

≥ Do not get dirt, sand, liquids, or other foreign matter on the

terminals.

≥ Do not touch the plug terminals (i and j) with metal objects.

≥ Do not disassemble, remodel, heat or throw into fire.

If any electrolyte should come into contact with your hands or clothes,

wash it off thoroughly with water.

If any electrolyte should come into contact with your eyes, never rub

the eyes. Rinse eyes thoroughly with water, and then consult a doctor.

Warning

Risk of fire, explosion and burns. Do not disassemble, heat above

60 oC (140 oF) or incinerate.

Product Identification Marking is located on the bottom of unit.

This product contains a CR Coin Cell Lithium Battery which contains

Perchlorate Material – special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

.

HM-TA1

A lithium ion/polymer battery that is recyclable

powers the product you have purchased.

Please call 1-800-8-BATTERY for information

on how to recycle this battery.

U.S.A./CANADA CONSUMERS: ATTENTION:

HM-TA1_PP-VQT2Z95_mst.book 4 ページ２０１０年７月２７日　火曜日　午後９時２０分

VQT2Z95 5

Precautions

USE & LOCATION

≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should

not be exposed to rain or moisture. Do not connect the power supply or

operate your camera if it gets wet. Your camera has been designed for

outdoor use, however it is not designed to sustain direct exposure to

water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or

even a cup of coffee. This action could permanently damage the

internal parts of your camera. Do not attempt to disassemble this unit.

There are no user serviceable parts inside. Unplug your camera from

the power supply before cleaning.

≥ AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED

BY YOUNG CHILDREN. DO NOT ALLOW CHILDREN TO HANDLE

THE SD CARD.

≥ DO NOT AIM YOUR CAMERA AT THE SUN OR OTHER BRIGHT

OBJECTS

≥ DO NOT EXPOSE YOUR CAMERA TO EXTENDED HIGH

TEMPERATURE ... Such as, in direct sunlight, inside a closed car,

next to a heater, etc... This action could permanently damage the

internal parts of your camera.

≥ AVOID SUDDEN CHANGES IN TEMPERATURE ... If the unit is

suddenly moved from a cold place to a warm place, moisture may form

on the SD card and inside the unit.

≥ DO NOT LEAVE YOUR CAMERA OR THE POWER SUPPLY

TURNED ON WHEN NOT IN USE.

≥ STORAGE OF YOUR CAMERA ... Store and handle your camera in a

manner that will not subject it to unnecessary movement (avoid

shaking and striking). Your camera contains a sensitive pick-up device

which could be damaged by improper handling or storage.

CARE

≥ TO CLEAN YOUR CAMERA ... Do not use strong or abrasive

detergents when cleaning your camera body.

≥

TO PROTECT THE LENS

... Do not touch the surface of the lens with

your hand. Use a commercial camera lens solution and lens paper

when cleaning the lens. Improper cleaning can scratch the lens coating.

WARNING

CAUTION

HM-TA1_PP-VQT2Z95_mst.book 5 ページ２０１０年７月２７日　火曜日　午後９時２０分

6 VQT2Z95

≥ TO PROTECT THE FINISH OF YOUR CAMERA ... Before handling

your camera, make sure your hands and face are free from any

chemical products, such as suntan lotion, as it may damage the finish.

-If you see this symbol-

∫ Indemnity about recorded content

Panasonic does not accept any responsibility for damages directly or

indirectly due to any type of problems that result in loss of recording or

edited content, and does not guarantee any content if recording or editing

does not work properly. Likewise, the above also applies in a case where

any type of repair is made to the unit.

∫

About recording method and compatibility of this unit

This unit can record detailed high definition images based on the MP4

format (MPEG-4 AVC/H.264 codec).

≥ Since the recording method is different from the AVCHD format, the

data is not compatible.

∫ Cards that you can use with this unit

SD Memory Card, SDHC Memory Card and SDXC Memory Card

≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB

or more Memory Cards that do not have the SDXC logo are not based

on SD Memory Card Specifications.

≥ Refer to page 16 for more details on SD cards.

∫ For the purposes of these operating instructions

≥ SD Memory Card, SDHC Memory Card and SDXC Memory Card are

referred to as the “SD card”.

≥ Pages for reference are indicated by an arrow, for example: l 00

Information on Disposal in other Countries outside the

European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact

your local authorities or dealer and ask for the

correct method of disposal.

HM-TA1_PP-VQT2Z95_mst.book 6 ページ２０１０年７月２７日　火曜日　午後９時２０分

VQT2Z95 7

Accessories.................................8

Preparation

Parts identification and

handling...................................... 9

Battery supply.......................... 11

Inserting/removing the

battery..................................... 12

Charging the battery................ 13

Charging and recording time... 14

Approximate operating time

and number of recordable

still pictures ............................. 15

Preparing the card ................... 16

Cards that you can use with

this unit.................................... 16

Inserting/removing an SD

card......................................... 18

Recording/Playback

Turning the unit on/off............. 20

Setting date and time.............. 21

Recording................................. 22

Recording motion pictures ...... 22

Recording still pictures............ 23

Digital zoom in/out function..... 24

Recording with the LED light... 24

Effect function (applying

special effects) ........................ 25

Playback ................................... 26

Motion picture/Still picture

playback.................................. 26

Creating still picture from

motion picture.......................... 29

Playing back the slide show.... 29

Deleting motion pictures/

still pictures ............................. 30

Using the menu screen ........... 32

Menu list.................................. 33

Watching Motion/

Still Pictures on your TV ......... 36

With a PC

What you can do with a PC..... 38

Operating environment........... 40

Installation................................ 44

Connecting to a PC.................. 46

About the PC display .............. 47

Starting HD Writer PE 1.0........ 48

Reading the operating

instructions of the software

applications............................. 48

If using Mac.............................. 49

To use as a camera for

Skype ........................................ 50

How to connect....................... 52

Others

Indications................................ 53

Messages/Troubleshooting .....55

Cautions for use .......................59

About copyright........................64

Recording modes/

approximate recordable

time ............................................65

Approximate number of

recordable pictures .................66

Specifications ...........................67

Optional accessories................71

Accessory Order Form

(For USA and Puerto Rico

Customers) ............................. 72

Limited Warranty (ONLY FOR

U.S.A. AND PUERTO RICO) .....73

Warranty (For Canadian

Customers)................................75

Index ..........................................76

Spanish Quick Use Guide/

Guía española para el uso

rápido.........................................77

Contents

HM-TA1_PP-VQT2Z95_mst.book 7 ページ２０１０年７月２７日　火曜日　午後９時２０分

8 VQT2Z95

Accessories

Check the accessories before using this unit.

Keep the accessories out of reach of children to prevent swallowing.

Product numbers correct as of July 2010. These may be subject to

change.

≥ The unit comes with built-in HD Writer PE 1.0 video editing

software.

Battery pack

VW-VBJ10

AV cable

VFA0530

Hand strap

VFC4627

USB extension cord

K2KYYYY00064

HM-TA1_PP-VQT2Z95_mst.book 8 ページ２０１０年７月２７日　火曜日　午後９時２０分

VQT2Z95 9

Preparation

Parts identification and handling

1 Motion picture button (l 22)

2 Playback button [ ] (l 26)

3 Light button [LIGHT] (l 24)

4 Cursor button [T, W, 2, 1]

5 USB terminal slide lever (l 13)

6 MENU/SET button [MENU/SET] (l 32)

7 Delete button [ ] (l 30)

8 Status indicator (l 13, 18, 36)

9 Photoshot button [ ] (l 23)

10 LCD monitor

11 Power button [ ] (l 20)

12 Hand strap fixture

≥ Do not cover the microphones.

Due to limitations in LCD production technology, there may be some

tiny bright or dark spots on the LCD monitor screen. However, this is

not a malfunction and does not affect the recorded picture.

1

6 7 8 910 1112

2

3

4

5





HM-TA1_PP-VQT2Z95_mst.book 9 ページ２０１０年７月２７日　火曜日　午後９時２０分

10 VQT2Z95

13 Audio-video output terminal [A/V] (l 36)

≥ Use the AV cable (only the supplied cable).

14 Speaker

15 USB terminal [ ] (l 13, 44, 46, 52)

16 USB terminal cover (l 13)

17 LED light (l 24)

18 Lens

19 Internal microphones

20 Card/battery door (l 12, 18)

21 Battery slot (l 12)

22 Card slot (l 18)

23 Battery release lever [BATT] (l 12)

24 Tripod receptacle

A/V

13

1514 16

20 2122 23 24

17 18 19

HM-TA1_PP-VQT2Z95_mst.book 10 ページ２０１０年７月２７日　火曜日　午後９時２０分

VQT2Z95 11

Preparation

Battery supply

∫ About batteries that you can use with this unit

The battery that can be used with this unit is VW-VBJ10.

It has been found that counterfeit battery packs which look very

similar to the genuine product are made available to purchase in

some markets. Some of these battery packs are not adequately

protected with internal protection to meet the requirements of

appropriate safety standards. There is a possibility that these

battery packs may lead to fire or explosion. Please be advised that

we are not liable for any accident or failure occurring as a result of

use of a counterfeit battery pack. To ensure that safe products are

used we would recommend that a genuine Panasonic battery pack

is used.

HM-TA1_PP-VQT2Z95_mst.book 11 ページ２０１０年７月２７日　火曜日　午後９時２０分

12 VQT2Z95

1 Open the card/battery door and insert the battery in

the direction shown in the figure.

≥ Push the center of the battery in the direction of the # until it

“clicks” and locks.

2 Close the card/battery door.

∫ Removing the battery

Move the battery release lever in the

direction indicated by the arrow and

remove the battery when unlocked.

≥ Turn off the unit and make sure the LCD

monitor is turned off. Then remove the

battery while supporting the unit to prevent

it from dropping.

Inserting/removing the battery

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s

instructions.







HM-TA1_PP-VQT2Z95_mst.book 12 ページ２０１０年７月２７日　火曜日　午後９時２０分

VQT2Z95 13

Important:

≥ The battery will not be charged if the unit is turned on.

1

Slide the USB terminal slide lever while holding it down.

≥

This pushes the USB terminal cover open deploying the USB terminal.

2 Connect USB terminal of this unit to a PC with a USB

extension cord.

≥ Connect the USB extension cord by inserting it securely all the

way without forcing.

A USB extension cord (supplied)

≥ Do not use any other USB extension cords except the supplied one.

(Operation is not guaranteed with any other USB extension cords.)

≥ Insert the USB extension cord securely all the way.

(The insertion of the plug to the USB terminal of this

unit leaves a gap B.) It will not operate properly if it

is not inserted all the way.

≥ During charging, the status indicator flashes. When

charging is finished, the status indicator turns off.

Charging the battery

When this unit is purchased, the battery is not charged. Charge

the battery fully before using this unit for the first time.



A Slide the USB

terminal slide lever

until it “clicks” and

locks.





HM-TA1_PP-VQT2Z95_mst.book 13 ページ２０１０年７月２７日　火曜日　午後９時２０分

14 VQT2Z95

∫

To return the USB terminal slide lever to its original position

While holding down the USB terminal

slide lever, slide it to its original

position and close the USB terminal

cover.

≥ Please refer to page 60 if the status indicator flashes quickly.

≥ During the charging,the unit can not be turned on with the power

button. In order to turn on the unit, disconnect it from the PC.

≥ We recommend using Panasonic batteries (l 8, 71).

≥

If you use other batteries, we cannot guarantee the quality of this product.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in an automobile exposed to direct

sunlight for a long period of time with doors and windows closed.

∫ Charging/Recording time

≥ Temperature: 25 oC (77 oF)/humidity: 60%RH

* Maximum continuous recordable time for one scene:

j If [REC MODE] is set to //:

29min59sec

j If [REC MODE] is set to :

Approx. 20 min (up to 4 GB recording capacity)

≥ These times are approximations.

≥

The indicated charging time is for when the battery has been

discharged completely. Charging time and recordable time vary

depending on the usage conditions such as high/low temperature.

Charging and recording time

Battery model

number

[Voltage/

Capacity

(minimum)]

Charging

time

Recording

mode

Maximum

continuous

recordable

time

*

Actual

recordable

time

Supplied battery/

VW-VBJ10

(optional)

[3.6 V/940 mAh]

4h10min

1h20min 45min

/ 1h35min 50min

1h50min 1h







HM-TA1_PP-VQT2Z95_mst.book 14 ページ２０１０年７月２７日　火曜日　午後９時２０分

VQT2Z95 15

≥ The actual recordable time refers to the recordable time when

repeatedly starting/stopping recording, turning the unit on/off, adjusting

the zoom etc.

≥ The batteries heat up after use or charging. This is not a malfunction.

Recording conditions by CIPA standard

≥ CIPA is an abbreviation of Camera & Imaging Products Association.

≥ Using the supplied battery

≥ Using a Panasonic SD Memory Card (2 GB)

Approximate operating time and number of

recordable still pictures

Number of recordable

pictures

Approx.

230 pictures

By CIPA standard

Recording time

Approx. 115 min

Playback time Approx. 180 min

Battery capacity indication

≥ The display changes as the battery capacity reduces.

####

If the battery discharges, then will become red.

HM-TA1_PP-VQT2Z95_mst.book 15 ページ２０１０年７月２７日　火曜日　午後９時２０分

16 VQT2Z95

Preparation

Preparing the card

Use SD cards conforming to Class 4 or higher of the SD Speed

Class Rating* for motion picture recording.

* The SD Speed Class Rating is the speed standard for successive

writes.

This unit (an SDXC compatible device) is compatible with SD Memory

Cards, SDHC Memory Cards and SDXC Memory Cards. When using

an SDHC memory card/SDXC memory card with other equipment,

check the equipment is compatible with these memory cards.

Cards that you can use with this unit

Card type Capacity

Motion picture

recording

Still picture

recording

SD

Memory

Card

8MB/

16 MB/

32 MB/

64 MB/

128 MB/

256 MB

Cannot be guaranteed

in operation.

The recording may

suddenly stop during

motion picture

recording depending

on the SD card you

use. (l 56)

Can be used.

512 MB/

1GB/2GB

Can be used.

SDHC

Memory

Card

4GB/6GB/

8GB/12GB/

16 GB/24 GB/

32 GB

SDXC

Memory

Card

48 GB/64 GB

HM-TA1_PP-VQT2Z95_mst.book 16 ページ２０１０年７月２７日　火曜日　午後９時２０分

VQT2Z95 17

≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB

or more Memory Cards that do not have the SDXC logo are not based

on SD Memory Card Specifications.

≥ When the write-protect switch A on SD card is locked,

no recording, deletion or editing will be possible on the

card.

≥ Keep the Memory Card out of reach of children to

prevent swallowing.

32

HM-TA1_PP-VQT2Z95_mst.book 17 ページ２０１０年７月２７日　火曜日　午後９時２０分

18 VQT2Z95

Caution:

Check that the status indicator has gone off.

1 Open the card/battery door and insert (remove) the

SD card into (from) the card slot B.

≥ Face the label side C in the direction shown in the illustration and

press it straight in as far as it will go.

≥ Press the center of the SD card and then pull it straight out.

2 Securely close the card/battery door.

≥ Do not touch the terminals on the back of the SD card.

≥ Do not apply strong shocks, bend, or drop the SD card.

≥ Electrical noise, static electricity or the failure of this unit or the SD card

may damage or erase the data stored on the SD card.

≥ When the status indicator is lit, do not:

j Remove the SD card

j Turn the unit off

j Insert and remove the USB terminal

j Expose the unit to vibrations or shock

Performing the above while the lamp is on may result in damage to

data/SD card or this unit.

≥ Do not expose the terminals of the SD card to water, dirt or dust.

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used

on other equipment, for the first time on this unit, format the SD card.

(l 35) When the SD card is formatted, all of the recorded data is

deleted. Once the data is deleted, it cannot be restored.







Status indicator A

≥ When this unit is

accessing the SD card,

the status indicator

lights up.

HM-TA1_PP-VQT2Z95_mst.book 18 ページ２０１０年７月２７日　火曜日　午後９時２０分

VQT2Z95 19

≥ Do not place SD cards in the following areas:

j In direct sunlight

j In very dusty or humid areas

j Near a heater

j Locations susceptible to significant difference in temperature

(condensation can occur.)

j Where static electricity or electromagnetic waves occur

≥ To protect SD cards, return them to their cases when you are not using

them.

≥ About disposing of or giving away the SD card. (l 63)

HM-TA1_PP-VQT2Z95_mst.book 19 ページ２０１０年７月２７日　火曜日　午後９時２０分

20 VQT2Z95

Recording/Playback

Turning the unit on/off

Press the power button to turn on the unit.

≥ The LCD monitor lights on.

To turn off the unit

Continue pressing the power button until the LCD monitor goes off.

∫ About the screen display

Please refer to page 53 for details of the icons displayed on the screen.

∫ About the power save function

To prevent battery consumption, it will turn off the

screen and go into idle mode after approx.

2 minutes of no operation. (The status indicator A

flashes.)

The unit will be turned off automatically if no

operation is performed for a further 5 minutes

(approx.) while in idle mode.

≥ Idle mode is canceled by pressing one of the buttons.

∫ About the high temperature warning icon

When the high temperature warning icon is displayed, the

temperature of the unit is high.

≥ It is possible to continue recording/playback when is displayed,

but it is recommended to stop operations and turn off the unit as soon

as possible.

≥ If the temperature rises further, the unit will be turned off automatically

after flashes. You will not be able to turn on the unit again until the

temperature lowers ( will flash.), so wait until the temperature

lowers before using again.

≥ A countdown until the recording is stopped will start from approx.

15 seconds during motion picture recording, and the recording will stop

when the display reaches 0 seconds.

≥ When you turn off the unit while the temperature is high ( is

displayed.), you will not be able to turn on the unit again until the

temperature lowers. ( will flash.)



HM-TA1_PP-VQT2Z95_mst.book 20 ページ２０１０年７月２７日　火曜日　午後９時２０分

Page is loading ...

Panasonic 1AG6P1P6073-S User manual

This manual is also suitable for

Panasonic 1AG6P1P6073-S User manual

Related papers

Other documents