Wolf Garten Compact plus 34 E User manual

Page is loading ...

3

clic

k

RQ

L

6

0

5

0

4

0

3

0

2

0

M

KH J

S U

6-7 NM

T

1

2

N PO

4

Compact plus 34 AC

D

1 Ein-/ Ausschalter

2 Sicherheitsbügel

3 Kabelknickschutz

4 Schutzklappe

5 Grasfangsack

6 CCM-Schalter (cut-collect-mulch)

7 Steckerbrücke

8 Füllstandsanzeige

9 Griffhöheneinstellung

10 Schnitthöheneinstellung

11 Schnitthöhenanzeige

12 Ladebuchse (bei abgezogener Steckerbrük-

ke)

G

1 On-/Off-switch

2 Operator presence bail arm

3 Cable anti-king protection

4 Deflector plate

5 Collector

6 CCM switch (cut-collect-mulch)

7

Plug bracket

8 Filling indicator

9 Handle height adjustment

10 Height adjustment

11 Indicator to cutting

12 Charging socket (with plug bracket re-

moved)

F

1 Interrupteur

2 Etrier de sécurité

3 Protection antipliage du câble

4 Clapet de sécurité

5 Indicateur du niveau de remplissage

6 Commutateur CCM (cut-collect-mulch)

7 Raccord de fiche

8 Indicator du niveau de remplissage

9 Réglage de la hauteur du guidon

10 Reglage de la hauteur de coupe

11 Croquis de la hauteur de coupe

12 Broche de levage (raccord de fiche re-

tiré)

I

1 Interrutore per avviare

2 Archi di sicurezza

3 Regolazione profondit di lavoro

4 Deflettore

5 Raccoglierba

6 Interruttore CCM (cut-collect-mulch)

7

Spina a ponte

8 Indicatore di pieno carico

9 Regolazione altezza impugnatura

10 Regolazione dell‘altezza di taglio

11 Indicator dell‘ altezza

12 Presa di carica (con la spina a ponte

staccata)

n

1 In- en uitschakelaar

2 Veiligheidsbeugel

3 Kabel knikbeschermer

4 Achterklep

5 Grasvangzak

6 CCM-Schakelaar (cut-collect-mulch)

7 Stekkerbrug

8 Vulindikator

9 Duwboomhoogte instelling

10 Maaihoogte instelling

11 Maaihoogte aanwijzing

12 Laadbus (bij verwijderde stekkerbrug)

d

1 Strömbrytare start-stop

2 Sikkerhedsbøjle

3 Kabelknækbeskyttelse

4 Baklucken

5 Upsamlaren

6 CCM-afbryder (cut-collect-mulch)

7 Stikbro

8 Indikator for græsmængde

9 Indstilling af grebets højde

10 Instäällning av klipphöjden

11 Höjdavläsning av klipphöjden

12

Ladebøsning (ved frakoblet stikbro)

Page is loading ...

12

G

G Congratulations on your purchase of a WOLF lawn mower

Contents

Technical data . . . . . . . . . . . . . . . . . . . .12

Safety instructions . . . . . . . . . . . . . . . . . .13

Assembly . . . . . . . . . . . . . . . . . . . . . . .14

Operation . . . . . . . . . . . . . . . . . . . . . . .14

Maintenance . . . . . . . . . . . . . . . . . . . . .16

Spare parts . . . . . . . . . . . . . . . . . . . . . .16

Faults and how to remedy . . . . . . . . . . . . . .17

Guarantee terms . . . . . . . . . . . . . . . . . . .17

EC Declaration of Conformity . . . . . . . . . . . 128

A quick guide to features

–

CCM System: Cut, Collect, Mulch - all with one machine

– Central cutting height setting

– Fold-down handle for space-saving storage and easy trans-

port

– dual-position height-adjustable handle

– Easily emptied, capacious catchment bag with level indicator

– High-quality materials, excellent workmanship and attractive

design

– Ready-to-use: From 0 to mowing mode in 30 seconds

Technical data

It is important that you read, fully understand and ob-

serve the following safety precautions and warnings.

Careless or improper use of the machine may cause

serious or fatal injury. The user is responsible for any

accidents involving other people or other people‘s pro-

perty.

Never let children or other persons who are not familiar

with the operating instructions use the lawnmower. Ju-

veniles under l6 years may not use the equipment. Lo-

cal regulations may specify the minimum age of the

operator.

We reserve the right of technical changes

D Measurement of noise at the operator’s ear according to EN

836.

E Measurement of vibrations at the handlebar held by the ope-

rator according to EN 1033, EN 836. The typical weighted

acceleration is:

Compact plus 34 AC

Typ 4908 ...

A 72 cm

B 36 cm

C 38 cm

D LP 77 dB (A)

E a

hw

< 2,5 m/s

2

Capacity (Accu) 9,0 Ah

Voltage (Accu) / Amperage 24 V

/ 18 A

Grass catcher 35 l

Cutting width 34 cm

Cutting height 20, 30, 40, 50, 60 mm

Weight 19 kg

Charger

Input 230 V ~ / 50 Hz

Output 24 V / 1,5 A

Charge time 6 h

Instruction manual

13

G

Safety instructions

Meaning of the symbols

General information

z This lawnmower is designed for domestic grass and lawn sur-

faces. Because of the physical risk to the user or to others, the

lawnmower must not be used for other purposes.

z Never mow the lawn if others – in particular children and ani-

mals – are in the vicinity.

z Only mow the lawn during daylight or with the aid of appropri-

ate artificial light.

Before mowing

z Always wear sturdy shoes and long trousers when mowing.

z Never mow while barefoot or wearing flimsy sandals.

z Check the site on which the machine is to be used, and remo-

ve all items which could be caught and ejected

z Check the grass catchment device regularly for wear-and-tear

and deformation.

z Before use, carry out a visual inspection to check whether the

cutting gear and its mounts are blunt or damaged. In order to

avoid generating an imbalance, replace blunt or damaged cut-

ting gear as an entire set.

When mowing

z Do not tilt the lawnmower when switching on the motor, unless

the lawnmower has to be tilted when starting. If that is the ca-

se, do not tip the lawnmower more than absolutely necessary,

and only lift the part furthest removed from the user. Always

ensure that both hands are in the operating position before re-

placing the lawnmower on the ground.

z Caution, danger! Cutting gear will continue running!

z Maintain the safety distance prescribed by the handle bars.

z Only switch on the motor if your feet are at a safe distance

from the cutting gear.

z Take care to ensure a safe and stable position, especially on

slopes. Never run; always walk calmly forward.

z Always mow slopes at right angles to the incline; never mow

up and down.

z When mowing slopes, be especially careful when changing di-

rection.

z Never mow steep slopes.

z Be especially careful when mowing backwards and pulling the

lawnmower towards you.

z Switch the mower off when tilting it, running on empty or trans-

porting the lawnmower, e.g. to/from a lawn or along paths.

z Never use the lawnmower if safety devices are faulty or mis-

sing, such as deflector and/or grass catchment devices.

z Caution: do not touch running cutters.

z Always keep hands and feet away from rotating parts. Do not

stand in front of the grass ejector opening.

z Never lift or carry a lawnmower while the motor is running.

z Never open the guard flap while the motor is still running.

z Before removing the grass catchment device, turn off the mo-

tor and wait until the cutting gear has stopped running. After

emptying the grass catchment device, reattach carefully.

z Never drive across gravel while the motor is running – impac-

ting stones!

z Avoid mowing wet grass where possible.

z Under the following conditions, the unit must be switched off,

the switch key must be removed and the unit must be brought

to a standstill:

– leaving the lawnmower

– unblocking a blade

– intending to check, clean or work on the lawnmower

– you have encountered a foreign object, in which case you

should check the lawnmower for damage and carry out any

necessary repairs.

– the lawnmower is vibrating heavily (switch off immediately

and ascertain the cause).

– you wish to change the settings or carry out cleaning work.

– you wish to check whether the connection cables have be-

come tangled or damaged.

– If the connection cable is damaged during use, it must be

immediately disconnected from the mains power supply.

Do not touch the cable before it has been disconnected

from the mains power supply.

Maintenance

1 Attention! Rotary cutter blade

Before all maintenance and cleaning work:

z Pull the plug bracket out

z Do not touch running blades.

z Never spray down the lawnmower using water, especially not

at high pressure.

z Regularly check and tighten all visible screws and nuts, espe-

cially those relating to the cutting bar, to ensure a firm fit.

z Always have blades changed or re-sharpened by a specialist

workshop, since a balance test must be carried out as speci-

fied in the safety regulations following any removal of parts.

z Only use original WOLF spare parts. Otherwise we can’t gua-

rantee that your mower conforms to the safety regulations.

z Never park your lawnmower in damp rooms.

z For safety reasons, replace worn or damaged parts.

Attention!

Read instruction

manual before

use!

Keep bystan-

ders away!

Caution! - Sharp

cutting blades -

pull the plug

bracket out be-

fore performing

any maintenance

work.

14

G

Battery

z If the electrolyte (acid) escapes from the battery cell due to ex-

treme mishandling or extremely difficult conditions, observe

the following:

– Avoid contact with the skin.

– Rinse off the electrolyte with water or a neutralising agent.

– The rinsing water must not seep into drains or the soil. It

must be disposed of separately.

– On contact with the skin or eyes, rinse with water and con-

sult a doctor.

– Take the mower to a specialised workshop for cleaning and

repairs.

Charger

z This charger should only be used with WOLF-Battery Mower

Compact plus 34 AC.

z Do not store or use charger in humid or wet conditions but in

dry room only.

z Disconnect charging units from mains socket by holding plug

only. Do not pull on cable as this can cause damage to internal

connections and make the unit unsafe.

z Never use the charger if the cable, plug or any part of the mo-

wer itself should be faulty. Any repair should be carried out by

a qualified person.

z Ensure that the cooling of the charging unit is always guaran-

teed by keeping the cooling slots open and clean. Do not use

it close to a radiatoror other heating appliances.

z Never attempt opening the casing of the unit. If it does not

function properly take it to a qualified service centre for in-

spection.

Dispose of batteries in an environmentally

responsible manne

Disposal

Assembly

Fasten handle bars

1 Caution!

The cable can be damaged while folding up or pulling out

the handle bar.

z Inlay the cable in the bend protection .

z When adjusting the handle height take care that the ca-

ble is not crimped

1. Fold the bottom part of the handle up and screw it tight with

the two hand wheels .

2. Set the handle to the desired height .

3. Fold the upper part of the handle out and screw it tight with the

wing nuts .

Mount the collecting bag

1. Place the chute (1) on the collecting bag flap (2) .

2. Press the chute from behind onto the collecting bag flap. The

chute is ready for use as soon as it locks into place .

Operation

General

Operating times

z Please check noise abatement regulations prevailing in your

country.

z Batteries contain lead and must be of in the

correct manner. Batteries contain lead are

harmful to the environment if they are incine-

rated with other household garbage.

z WOLF Garten would like to encourage envi-

ronmentally friendly consumer attitudes. Wor-

king together with you and WOLF dealers we

guarantee the acceptance and recycling of

used batteries.

Do not dispose of electrical equipment in domestic

waste. Recycle equipment, accessories and pa-

ckaging in an environment-friendly manner.

A

B

C

D

A

C

B

C

D

E

F

G

E

F

G

15

G

Instructions for the use of WOLF battery-powered

mowers

3 The area that can be mown by your battery-powered

mower is dependent on various factors. These are:

Type of lawn

Battery-powred lawnmowers are suitable for lawns the are

mown frequently, normally, and, to a certain extent, for

lawns that have not been cut for a while after holidays. The

surface area that can be mown does however decrease in

the order given above. Battery-powered mowers are not

suitable for infrequently-mown meadows or similar.

Lawn structure

The area that can be mown decreases in proportion to the

density of the grass. The mowing capability is lowest on ex-

tremely dense grass, e. g. golf greens.

Lawn condition

The condition of the lawn (dry, damp with dew, wet) has a

major influence on the area of lawn which can be mowed.If

the lawn is dry, this will give the maximum area which can

be mowed.If the lawn is wet, more energy is required for the

mowing and collection and thus this is the condition where

the area which can be mowed is at a minimum.

Mowing/walking speed

The walking speed infl uences the duration of mowing and

therefore the area that can be covered. We therefore re-

commend rapid mowing. The mowing path should not be

covered twice if possible and the overlap of mowing tracks

should be kept as minimal as possible. Frquently switching

the mower on and off likewise decreases the battery‘s po-

wer.

Charging

1 Attention! Only use the charger in dry rooms!

1. Pull the plug bracket out .

2. Connect charge plug to battery

.

3. Insert plug charger in socket, red lamp lights up on plug char-

ger .

4. Battery is fully charged when this lamp goes out

3 Mowers with lead batteries must be charged before

being put into storage for winter, and also after each

mowing.

z Charge times with the enclosed charging unit approx. 6

hours.

z

Only use the supplied battery charger.

z Ensure that the charging plug is correctly seated.

z The mower cannot be switched on during the charging

process.

Set cut height

1 Attention! Rotary cutter blade

Undertake work/adjustments on the equipment only after

the motor is switched off and the cutting tool has come to a

standstill.

z Switch the motor off and pull the plug bracket out.

1. Pull the lever out .

2. Set the desired cutting height .

3. Press the lever back in .

Selection of Cutting height

z If possible, mow when grass is dry in order to protect turf. Do

not se cutting position too low when mowing very hight or wet

grass.

z We recommend an average cutting height of 40 mm.

Starting and Stoping

z Switch on motor with mowerplaced on level and firm ground.

z not in high grass - alternatively tilt slightly .

Switch-on motor

1. Depress button and hold (1).

2. Lift up bar (2).

3. Release bar (2).

Switch-off motor

z Release bar (2).

Safety switch

3 In case of overload or blocking, the motor shuts down

automatically!

Remove plug bracket and eliminate problem!

z Overload: Cutting height is too low, or forward speed is too

fast

z Blocking: Foreign object in cutting area (e.g. branches)

z The machine can be switched on again after about 5 min.

Tips for mowing

z To prevent strips of grass from being left unmowed, the cutting

paths must always overlap a few centimeters .

Cut / Collect

Activate cut/collect function

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z Do not start the motor until your feet are at a safe

distance from the cutting tool.

1. Turn the switch to “CUT/COLLECT”.

2. Hang up the collection bag if necessary.

3. Start the motor.

Hang up collection bag

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z Do not attach the collection bag until your feet are at a

safe distance from the cutting tool.

1. Lift the protective flap.

2. Hang the grass bag in the chassis with the hooks in the reces-

ses (see arrow).

3. Replace the protective flap.

H

J

K

L

M

N

O

P

Q

R

16

G

Emptying of Grassbox

When the collection bag is full, the flap lowers by itself.

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z Switch the motor off and pull the plug bracket out.

z Empty collection bag.

z Remove potential blockages in the cutting space before

starting.

3 Instructions for level indicator:

For an efficient functioning of the level indicator, regularly

clean the holes under the level indicator in the collection

bag with a hand brush.

Mulch

„Mulching“ is a process in which the grass is finely chopped by a

special cutting system and then deposited on the ground. The re-

sult is that the grass does not have to be collected and disposed

of. „Mulching“ also prevents the lawn from drying out.

3 Instructions for mulching

We recommend:

z Depending on the growth of grass, mulch 1–2x per

week

z The grass should not be too high nor too wet!

z Go slow while mulching

z Take care that the blade channels do overlap.

z Do not cut grass more than 20 mm.

3 Note:

Mulching is not advisable in case of moss-affected or

entangled grass, because the cut material stays on the

moss surface and/or entanglement and thus cannot be

absorbed by the ground.

z Regularly scarify and manure the lawn.

Activating the mulch function

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z Do not start the motor until your feet are at a safe dis-

tance from the cutting tool.

1. Remove the grass collecting bag.

2. Set the switch to „MULCH“.

3. Start the motor.

Maintenance

General

1 Attention! Rotary cutter blade

Before all maintenance and cleaning work:

z Pull the plug bracket out.

z Do not touch running blades.

Cleaning

z Clean mower thoroughly after each mowing with cloth or

brush.

z Clean the mulch flap at regular intervals with a small

broom .

z Do not spray with water.

Winter Storage

z Clean mower thoroughly before storing away.

z Have your mower thoroughly checked once a year by an ap-

proved Service Centre.

z Do not store it in a wet or humid place.

Changing blades

z Caution! - Sharp cutting blades - pull the plug bracket out

before performing any maintenance work.

1 Attention!

An unbalance can develop after regrinding of the blade.

z Always regrind the blades in a specialist workshop,

because an unbalance check should be undertaken

according to the safety regulations.

z Always change blades in a specialist workshop. A torque

spanner of 10 mm is mandatorily required.

Fastening torque of the screws: 6 - 7 N-m .

Spare parts

S

Q

T

U

Item number Order description Product information

4904 031 Grass catcher

4908 096 Vi 34 X Replacement blade 34 cm

4908 074 Charger

17

G

Faults and how to remedy

Guarantee terms

Please carefully retain the guarantee card completed by the sel-

ler, or the proof of purchase.

The company WOLF-Garten provides a guarantee for 24 months from

the date of purchase. This guarantee is in accordance with the rele-

vant state of technology and the utilisation purpose / area of applicati-

on. The consumer‘s statutory rights are not affected by the following

guarantee guidelines.

Pre-conditions for the 24-month guarantee entitlement:

- Deployment of the device solely for private use.

The guarantee is reduced to 12 months in the commercial sector

or leasing business.

- Proper handling and observance of all information given in the ope-

rating manual, which forms part of our guarantee terms.

- Observance of the prescribed maintenance intervals.

- No unauthorised alteration of the design.

- Installation of original WOLF replacement parts / accessories.

- Presentation of the completed guarantee card and/or proof of

purchase.

This guarantee does not extend to normal wear-and-tear on blades,

blade mounting components or friction disks, V-belts/toothed belts,

running wheels/tyres, air filters, spark plugs and spark plug connec-

tors. Any guarantee claim shall be immediately void in the event of

unauthorised repairs. Faults and defects which can be traced to ma-

terial or manufacturing faults will be rectified exclusively by our con-

tracted workshops (the seller has the right to remedy a defect) in your

vicinity, or by the manufacturer if the latter is closer. Any claims going

beyond the provision of a guarantee are ruled out. There is no entitle-

ment to a replacement. Any transport damage should be reported not

to us but to the shipper in question since, otherwise, any compensati-

on claims vis-à-vis the shipper would be voided.

Remedy (X) by:

Problem Possible cause

WOLF service-

workshop

Yourself

Uneven running, heavy

vibrations in the mower

• Blades damaged

X ---

• Blades loose in the fastening parts

--- X

Motor will not run

• Battery discharged

--- X

• Blades blocked

--- X

• Plug bracket not inserted

--- X

Poor mowing-/ catching

• Blunt blades

X---

• Catcher bag blocked

--- X

• Incorrect cutting height

--- X

• Battery defective

X ---

When in doubt, always consult a WOLF service workshop.

Important: switch off the mower and disconnect the mains plug before inspecting, cleaning or working on the blades.

The guarantee services will be performed by our authorized re-

pair shops or:

G

WOLFGarden Ltd.

Crown BusinessPark

Tredegar

Gwent, NP22 4EF

Tel. : ++ 44 / 14 95 30 66 00

Fax : ++ 44 / 14 95 30 33 44

E-mail: [email protected]

Page is loading ...

www.WOLF-Garten.com

Teil-Nr. 0054 503 - TB

Wolf Garten Compact plus 34 E User manual

This manual is also suitable for

Wolf Garten Compact plus 34 E User manual

in other languages

Related papers

Other documents