ELECTRONIC PROGRAMMMER (FOR BOTTOM OVEN ONLY)
Programming the Cooking Time
Set the oven to the required temperature and press the Cooking duration selection
button 2. Set the required cooking duration time using the 5 or 6 buttons. The
symbol will remain illuminated and AUTO will appear on the display. The timer will
revert to clock mode after 5 seconds. At the end of the selected duration time, the oven
will switch OFF and an and the acoustic alarm will sound, the AUTO indicator will blink
and the symbol will turn off.
To silence the acoustic alarm, press the Manual operation selection button 4.
As the oven is now set for manual operation, ensure the oven controls are in the OFF ( )
position.
Programming Duration and End of Cooking Time
Set the oven to the desired temperature and press Cooking duration selection button 2.
Set the required cooking duration time with the 5 or 6 buttons; the AUTO indicator will
light up.
Now press the End of cooking time selection button 3 and set the required end of cooking
time with the 5 or 6 buttons. The oven will switch ON at the selected time and switch
OFF at the end of cooking time. During cooking, the symbol remains alight. When
the cooking ends, the acoustic alarm will sound, the AUTO indicator will blink and the
symbol will turn off.
To silence the alarm, proceed as described above. Make sure the oven controls are in the OFF
( ) position.
Programming End of Cooking Time
To set the time at which you want the cooking to end, set the desired temperature, press the
End of Cooking Time Selection button 3 and then the 5 or 6 buttons. The AUTO indicator
will light up. The timer will revert to clock mode after 5 seconds. When the time of the day
reaches the end of cooking time, the oven will switch OFF and the acoustic alarm will sound.
To silence the alarm, proceed as described above.
Make sure the oven the oven controls are in the OFF ( ) position.
Notes:
If a setting error is made, the acoustic alarm will sound and the AUTO indicator will blink.Cancel the setting by pressing
the Manual operation selection button 4, then reprogramme.
The acoustic alarm that sounds at the end of a program will continue for about seven minutes if it is not muted by pressing
the Manual operation selection button 4. At the end of the 7 minutes, the AUTO symbol will continue to blink until it is
cancelled.
The acoustic alarm has three different audio levels, low, medium and high. To adjust the audio level, ensure the timer is in
Manual mode, then press and hold button 5 to hear the selected level. Releasing the 5 button, then pressing again and
holding will select another audio level. Repeat the above procedure until the required audio level is heard.
Times programmed with Minute Minder, Duration and End of Cooking Time, and End of Cooking Time functions can be
displayed by pressing the corresponding buttons (1, 2 or 3).
6GB66032.fm Page 4 Thursday, April 29, 2004 9:17 AM