Page is loading ...
THANK YOU
We appreciate the trust and confidence you have placed in Backyard Creations® through the purchase of this table. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Backyard Creations®!
Item #2353--YR
Model #2353-YR
USE AND CARE GUIDE
Nicolett Wicker High Dining Table
If you have any problems with this product,
DO NOT RETURN IT TO THE STORE. CALL OUR CUSTOMER SERVICE HOTLINE at
1-(866)-391-4895
8am-5pm(EST), Monday-Thursday, 8am-4pm(EST), Friday.
2
Table of Contents
Table of Contents .......................................................... 2
Safety Information ......................................................... 2
Warranty ......................................................................... 2
Pre-installation .............................................................. 3
Planning Installation ................................................... 3
Tools required ............................................................ 3
Hardware Included ..................................................... 3
Package Contents ...................................................... 4
Assembly ....................................................................... 5
Care and Cleaning ........................................................ 6
Safety Information
THIS IS A RESIDENTIAL WARRANTY ONLY AND THIS WARRANTY DOES NOT
APPLY TO COMMERCIAL USE
1 YEAR FRAME, RESIN WEAVE WARRANTY
WHAT IS COVERED
We warrant the frame, resin weave to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
It remains the customer's responsibility for freight and packaging charges to and from our service center.
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use.
In addition, purchased parts are not covered under this warranty. We reserve the right to make substitutions with similar
merchandise, if the model in question is no longer in production.
For a copy of our full limited warranty, please contact our customer service team below.
(866) 391-4895, 8am - 5pm(EST), Monday – Thursday, 8am – 4pm(EST), Friday
WARNING: Do not sit or stand on the table top.
WARNING: Do not place the heavy items on the
table top.
WARNING: Do not place extremely hot or cold
items on glass table top.
Warranty
3 MENARDS.COM
Please contact 1-866-391-4895 for further assistance.
Pre-installation
PLANNING INSTALLATION
PLEASE READ COMPLETE INSTRUCTION MANUAL PRIOR TO ASSEMBLY!
Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a
nonabrasive surface to avoid scratching.
NOTE: More than one person may be required
to complete the assembly of this product.
TOOLS REQUIRED
Allen
wrench
(Included)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part
Description
Quantity
E
M6*20mm Hex bolt
8
F
M6*50mm Hex bolt
8
G
Washer
24
H
M6 nut
8
I
Hex bolt top cap
16
J
Hex bolt end cap
8
E
F
G
G
H
J
I
4
Pre-installation (continued)
PACKAGE CONTENTS
Part
Description
Quantity
A
Table glass
1
B
Table rim
1
C
Connector ring
2
D
Table leg
4
A
B
C
D
5 MENARDS.COM
Please contact 1-866-391-4895 for further assistance.
Assembly
1
Attaching the table legs
2
Attaching the connector ring
□ Do not tighten bolts until assembly is complete
□ Carefully place the table rim (B) upside down on a
soft, flat non-abrasive surface.
□ Insert the table legs (D) into the locking sleeves on
table rim (B) using hex bolts M6*20mm (E) and
washers (G)
□ Ensure all bolts are aligned and assembled
correctly. Attach the hex bolt caps (I).
□ Attach the connector rings (C) to the table legs (D)
using hex bolts M6*50mm (F) and washers (G).
□ Ensure all bolts are aligned and assembled
correctly.
□ Tighten all hex bolts (F) using hex nuts (H) with the
hex wrench. Attach the hex bolt caps (I) and (J).
3
Inserting glass top into the
table
With the assistance of another person turn the
table over and set it down on its legs
Turn table over and set it on its legs
Carefully place glass into table rim
6
.
□ The table is now ready for use.
Care and Cleaning
□ Do not allow water to build up in frames. This will cause corrosion and possible freezing damage in cold climates.
□ Use a mild soap and water for normal cleaning. DO NOT use janitorial or alcohol based cleaners. Some cleaners may
be marked as natural, but some ingredients may cause discoloration or have an adverse reaction to your finish.
□ Rinse with clean water and dry with a soft, absorbent cloth towel.
□ Treat frames with a liquid wax for maximum protection against UV rays and /or salty, damp air.
Assembly
If you have any problems with this product,
DO NOT RETURN IT TO THE STORE.CALL OUR CUSTOMER SERVICE HOT-LINE at
1-(866) 391-4895
8am-5pm (EST), Monday-Thurday,8am-4pm(EST),Friday.
Retain this manual for future use.
/
