KitchenAid KRLB 1211 User guide

Category
Fridge-freezers
Type
User guide

KitchenAid KRLB 1211 is a refrigerator with a freezer compartment designed for preserving food. It features adjustable temperature settings, a meat & fish compartment for extended storage of fresh foods, and a dedicated drawer for fruits and vegetables. The appliance also includes an ice maker and a water dispenser for added convenience. With its spacious storage capacity and advanced cooling technologies, the KitchenAid KRLB 1211 helps maintain the freshness and quality of your food items.

KitchenAid KRLB 1211 is a refrigerator with a freezer compartment designed for preserving food. It features adjustable temperature settings, a meat & fish compartment for extended storage of fresh foods, and a dedicated drawer for fruits and vegetables. The appliance also includes an ice maker and a water dispenser for added convenience. With its spacious storage capacity and advanced cooling technologies, the KitchenAid KRLB 1211 helps maintain the freshness and quality of your food items.

Instructions for use
Before using the appliance 4
Safeguarding the environment 4
Precautions and general recommendations 6
How to operate the refrigerator compartment 7
Using the meat & fish compartment (if present) 8
How to operate the freezer compartment (if present) 9
Defrosting the appliance 10
Cleaning and maintenance 11
Troubleshooting guide 12
After-sales service 13
Installation 13
4
Your new appliance is designed exclusively for domestic use.
To get the most out of your new appliance, please read this user handbook carefully. This
handbook contains a description of the appliance and useful tips for storing food. Keep this
handbook for future reference.
1. After unpacking, make sure that the appliance is undamaged and that the door closes properly.
Any damage must be reported to your dealer within 24 hours after delivery of the appliance.
2. Wait at least two hours before switching the appliance on in order to ensure the refrigerant circuit is
fully efficient.
3. Installation of the appliance and electrical connections must be carried out by a qualified electrician, in
accordance with the manufacturer's instructions and local safety regulations
4. Clean the inside of the appliance before using it.
Before using the appliance
1. Packing
The packing material is 100% recyclable and bears the recycling symbol. For disposal, comply with the
local regulations. Keep the packing materials (plastic bags, polystyrene parts, etc.) out of the reach of
children, as they are a potential source of danger.
2. Scrapping/Disposal
The appliance is manufactured using recyclable material.
This appliance is marked in compliance with European Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE). By ensuring the correct disposal of this appliance, you can help prevent
potentially negative consequences for the environment and the health of persons.
The symbol on the appliance, or on the accompanying documents, indicates that this appliance
should not be treated as domestic waste but must be taken to a special collection centre for the
recycling of electrical and electronic equipment.
When scrapping the appliance, make it unusable by cutting off the power cable and removing the doors
and shelves so that children cannot easily climb inside and become trapped.
Scrap the appliance in compliance with local regulations on waste disposal, taking it to a special
collection centre; do not leave the appliance unattended even for a few days, since it is a potential
source of danger for children.
For further information on the treatment, recovery and recycling of this product, contact your
competent local office, the household waste collection service or the shop where you purchased the
appliance.
Information:
This appliance does not contain CFCs. The refrigerant circuit contains R134a (HFC) or R600a (HC)
(see the rating plate inside the appliance).
Appliances with Isobutane (R600a): isobutane is a natural gas without environmental impact, but is
flammable. Therefore, make sure the refrigerant circuit pipes are not damaged.
This product may contain Fluorinated Greenhouse Gases covered by the Kyoto Protocol; the
refrigerant gas is inside a hermetically sealed system.
Refrigerant gas: R134a has a Global Warming Potential of (GWP) 1300.
Safeguarding the environment
5
Declaration of conformity
This appliance has been designed for preserving food and is manufactured in compliance with
Regulation (CE) No. 1935/2004.
This appliance has been designed, manufactured and marketed in compliance with:
- safety objectives of the “Low Voltage" Directive 2006/95/CE (which replaces 73/23/CEE and
subsequent amendments);
- the protection requirements of Directive “EMC" 2004/108/EC.
Electrical safety of the appliance can only be guaranteed if it is correctly connected to an approved
earthing system.
Safeguarding the environment
6
INSTALLATION
The appliance must be handled and installed by
two or more persons.
Be careful not to damage the floors (e.g.
parquet) when moving the appliance.
During installation, make sure the appliance
does not damage the power cable.
Make sure the appliance is not near a heat
source.
To guarantee adequate ventilation, leave a space
on both sides and above the appliance and
follow the installation instructions.
Keep the appliance ventilation openings free.
Do not damage the appliance refrigerant circuit
pipes.
Install and level the appliance on a floor strong
enough to take its weight and in a place suitable
for its size and use.
Install the appliance in a dry and well-ventilated
place. The appliance is arranged for operation in
places where the temperature comes within the
following ranges, according to the climatic class
given on the rating plate. The appliance may not
work properly if it is left for a long time at a
temperature outside the specified range.
Climatic Class Amb. T. (°C) Amb. T. (°F)
SN From 10 to 32 From 50 to 90
N From 16 to 32 From 61 to 90
ST From 16 to 38 From 61 to 100
T From 16 to 43 From 61 to 110
Make sure the voltage specified on the rating
plate corresponds to that of your home.
Do not use single/multi adapters or extension
cords.
For the water connection, use the pipe supplied
with the new appliance; do not reuse that of the
previous appliance.
Power cable modification or replacement must
only be carried out by qualified personnel.
It must be possible to disconnect the appliance
from the power supply by unplugging it or by
means of a mains two-pole switch installed
upstream of the socket.
SAFETY
Do not store or use petrol, flammable liquids or
gas in the vicinity of this or other electrical
appliances. The fumes can cause fires or
explosions.
Do not use mechanical, electric or chemical
means other than those recommended by the
Manufacturer to speed up the defrost process.
Do not use or place electrical devices inside the
appliance compartments if they are not of the
type expressly authorised by the Manufacturer.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
To avoid the risk of children becoming trapped
and suffocating, do not allow them to play or
hide inside the appliance.
Do not swallow the contents (non-toxic) of the
ice packs (in some models).
Do not eat ice cubes or ice lollies immediately
after taking them out of the freezer since they
may cause cold burns.
USE
Before carrying out any maintenance or cleaning
operation, unplug the appliance or disconnect it
from the power supply.
All appliances equipped with an automatic ice-
maker and water dispenser must be connected
to a water supply that only delivers drinking
water (with mains water pressure of between
0.17 and 0.81 Mpa (1.7 and 8.1 bar)). Automatic
ice-makers and/or water dispensers not directly
connected to the water supply must be filled
with drinking water only.
Use the refrigerator compartment only for
storing fresh food and the freezer compartment
only for storing frozen food, freezing fresh food
and making ice cubes.
Do not store glass containers with liquids in the
freezer since they may burst.
The Manufacturer declines any liability if the
above advice and precautions are not
respected.
Precautions and general recommendations
7
How to operate the refrigerator compartment
Switching on the appliance
1. Connect the plug to the mains.
2. Move the (B) key to the ON position. The 4 LEDs will come on, go off again, and then set themselves
to the factory settings.
3. The appliance is now switched on, and the meat & fish compartment is also on. The refrigerator
compartment temperature is preset by the factory to the intermediate position.
Adjusting the temperature in the refrigerator compartment
To adjust the temperature in the refrigerator compartment, press the (A) key to scroll through the
temperature settings:
Note:
The ambient air temperature, frequency of door opening, the introduction of hot food, and inappropriate
positioning of the appliance, may have an impact on the actual internal temperatures of the refrigerator,
which may then differ from what is indicated on the panel.
Switching the appliance off
If the appliance is to be left unused for extended periods of
time, it should be switched off pressing the On/Off key (B).
How to use the refrigerator compartment:
Position the food as illustrated in the figure:
1. Cooked food
2. Dairy products, preserves, cheese, butter
3. Fish, meat
4. Sliced cold meat
5. Fruit, vegetables, salad
6. Small jars, eggs
7. Tubes, small jars
8. Small bottles
9. Bottles
Note:
Cover food to prevent it drying out.
The space between the shelves and the rear wall inside the refrigerator ensures the free circulation of air.
Do not place food in direct contact with the rear wall of the refrigerator compartment.
Do not place hot food in the compartments.
Store liquids in closed containers.
Warning:
Storing vegetables with high water content may cause condensation on the glass shelves. This does
not damage the operation of the appliance.
AB
C
led 1led 2led 3led 4
8
The appliance has a special compartment designed for best storage of Meat and Fish products.
Inside this compartment, the temperature will be colder than in the rest of the refrigerator compartment.
This ensure that fresh foods (meat & fish) can be stored for longer periods, without the need to freeze
them, and without any alteration to their original freshness and nutritional values.
The optimum temperature inside the meat/fish compartment is guaranteed with the intermediate settings
(LEDs 2 and 3 on).
This special compartment is not recommended for storing fruit and vegetables, as the temperature could
fall below 0°C, causing the water naturally contained in them to freeze.
Temperature indicator
The temperature inside the compartment is displayed on a
temperature indicator, on the door of the compartment itself (Fig.1).
The coloured sector indicates the ideal temperature range for storing
meat & fish products.
The temperature inside the compartment takes approximately one
hour to stabilise.
Warning:
The temperature inside the meat & fish compartment is dependant on the temperature inside the rest of
the refrigerator. Therefore, if the compartment temperature indicator is in the or °C sectors, change
the refrigerator temperature using the (A) key. This will correct the temperature inside the meat & fish
compartment.
Removing the Meat & Fish compartment
To remove this compartment from the
refrigerator proceed as follows:
1. Remove the compartment cover by
loosening the two side stops on the
bottom wall (see Fig. 3).
2. Remove the compartment (See Fig. 2).
To fit the meat & fish compartment back,
proceed as follows:
1. Insert the compartment in its position.
2. Fit the meat & fish compartment cover.
Using the meat & fish compartment (if present)
AB
C
led 1led 2led 3led 4
Fig. 3
Fig. 1
Fig. 2
9
How to operate the freezer compartment (if present)
The freezer compartment can also be used to
store fresh food. The quantity of fresh food that can be
frozen in a 24 hour period is given on the rating plate.
Freezing fresh food
The recommended position for food to be frozen is
indicated in Fig. 1.
Place the food in the middle of the compartment,
ensuring that it does not come into contact with any
already frozen food, keeping a distance of at least 20 mm.
(Fig. 1).
For frozen fresh food storage times comply with the
opposite table.
When purchasing frozen food products:
Make sure the packaging is not damaged, since food can
deteriorate. If a packet is swollen or has damp patches, it
has not been stored in optimum conditions and may have
begun to thaw.
Purchase frozen food last and use thermal bags to carry it.
Place frozen foods in the freezer compartment as soon as
you get home.
Do not refreeze partially thawed food: consume it within
24 hours.
Avoid, or reduce temperature variations to the minimum.
Respect the expiry date given on the package.
Always follow the instructions given on the package for
storing frozen foods.
Making ice cubes
Fill the ice cube tray up to 2/3 with water and place in the
compartment.
Do not use sharp or pointed objects to detach the tray if it is
stuck to the bottom of the compartment.
Bend the ice tray slightly to facilitate removal of the cubes.
Fig. 1
10
Defrosting the appliance
Before defrosting, unplug the appliance or disconnect it
from the power supply.
The refrigerator compartment defrosting is completely
automatic. Droplets of water on the rear wall inside the
refrigerator compartment indicate that the automatic
defrost phase is in progress. The defrost water is
automatically run into a drain hole and collected in a
container, where it evaporates.
Clean the defrost water drain hole regularly using the tool
supplied, in order to ensure the constant and correct flow of
defrost water. (Fig.1)
Defrosting the compartment (if present)
The compartment should be defrosted once or twice a
year, or when too much frost has formed.
The formation of frost is a normal occurrence. The amount and
rate at which frost accumulates depends on room conditions
and how often the freezer door is open.
The formation of frost, particularly at the top of the
compartment, is a normal occurrence which does not prevent
correct operation of the appliance.
It is advisable to defrost when the freezer is nearly empty.
Open the door and remove all the food and put in a very
cool place or in a portable cooler.
Leave the door open to allow the frost to melt.
Clean the inside with a sponge soaked in a solution of lukewarm
water and/or mild detergent. Do not use abrasive substances.
Rinse and dry thoroughly.
Store the food inside the appliance.
Close the door.
Reconnect the plug and start the appliance following the instructions
of the chapter "How to operate the refrigerator compartment". Any
settings and selections in place before switching the appliance off will
be maintained.
Fig. 1
11
Cleaning and maintenance
Before any cleaning or maintenance operation, always
unplug the appliance or disconnect it from the power
supply.
Clean the inside of the refrigerator compartment regularly
with a sponge dampened in warm water and/or neutral
detergent. Rinse and dry with a soft cloth.
Do not use abrasive products.
The separators must not be washed with water but
cleaned with a lightly dampened sponge.
Clean the inside of the freezer compartment when
defrosting.
Clean the air vents and condenser at the rear of the
appliance regularly with a vacuum cleaner or brush.
Clean the outside with a soft damp cloth. Do not use
abrasive products, scourers, stain-removers (e.g.
thrichlorethylene acetone) or vinegar.
For long vacations
1. Empty the refrigerator.
2. Disconnect the appliance from the mains power supply.
3. Defrost and clean the interior.
4. In the event of prolonged disuse, leave the door open to prevent
mould, odours and oxidation from forming.
5. Clean the appliance.
• Clean the inside of the low temperature compartment (where
fitted) when defrosting.
• Clean the inside of the refrigerator compartment regularly with
a sponge dampened in warm water and/or neutral detergent.
Rinse and dry with a soft cloth. Do not use abrasive products.
12
1. The appliance does not work.
Is there a power failure?
Is the plug properly inserted in the socket?
The main switch is connected?
Has the fuse blown?
Is the power cable damaged?
Is the (B) key in the OFF position?
2. The temperature inside the compartments is not cold enough.
Do the doors close properly?
Is the appliance installed near a heat source?
Is the air circulation through the ventilation grills of the appliance obstructed?
3. There is water on the bottom of the refrigerator compartment
Is the defrost water drain blocked?
4. The inside light does not work.
First check point 1, then:
Disconnect the appliance from the power supply.
If the product is fitted with a light bulb, this must be checked following the instructions and diagram on
the attached product sheet.
If the appliance is fitted with LED lights, contact the After-sales Service.
5. If an excessive quantity of frost/ice forms inside the low temperature compartment
Is the door of the low temperature compartment correctly closed?
6. One or more LEDs of the temperature indicators are flashing (Only during the first 10
minutes after switching on, after the plug is connected to the mains)
Contact the After-sales Service.
Notes:
In case the alarm conditions indicated at point 6 occur, the temperature setting key (A) cannot be used.
However the product will ensure that the compartments are maintained at a temperature that does
not jeopardise the storage of food.
Noise variations are to be considered normal (gurgling, expansion noise, ...). These are due to the
normal operating cycle of the refrigerator.
Troubleshooting guide
AB
C
led 1led 2led 3led 4
13
Before contacting After-Sales Service:
1. Refer to the “Troubleshooting guide” to see if
the problem can be resolved quickly and easily.
2. Switch the appliance off, then back on again to
see if the problem has been resolved. If not,
disconnect the appliance from the power supply
and wait for about an hour before switching
back on again.
3. If the problem persists after this course of
action, contact After-sales Service on 00800
3810 4026.
Specify:
the nature of the problem,
the model,
the Service number (the number after the word
SERVICE on the rating plate on the inside of the
appliance),
your full address,
your telephone number and area code.
Note:
The direction of door opening can be
changed.
If this operation is performed by After-sales
Service it is not covered by the warranty.
After-sales service
Installation
Install the appliance away from heat sources. Installation in a hot environment, direct exposure to
sunlight or installation near heat sources (radiators, cookers) will increase energy consumption and
should therefore be avoided.
If this is not possible, the following minimum distances must be respected:
30 cm from coal or oil stoves;
3 cm from electric and/or gas cookers.
Fit the spacers (if supplied) at the bottom of the condenser on the back of the appliance.
Place in a dry, well ventilated location, on a level surface. Adjust the feet to ensure perfect level.
Clean the inside.
Install the accessories supplied.
Electrical connection
The electrical connections must comply with local standards.
Information on the voltage and power absorbed are shown on the rating plate inside the appliance.
The appliance must be earthed by law. The manufacturer declines all responsibility for
damage to persons, pets or goods as a result of failure to comply with the regulations above.
If the plug and the socket do not match, the socket should be replaced accordingly by a qualified
technician.
Do not use extention leads or multiple adaptors.
Disconnection from the mains
Disconnection from the power supply shall be possible either by removing the plug from the socket or by
means of a double-pole circuit breaker installed upstream the socket.
5019 708 02023
Printed in Italy
11/08
GB
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

KitchenAid KRLB 1211 User guide

Category
Fridge-freezers
Type
User guide

KitchenAid KRLB 1211 is a refrigerator with a freezer compartment designed for preserving food. It features adjustable temperature settings, a meat & fish compartment for extended storage of fresh foods, and a dedicated drawer for fruits and vegetables. The appliance also includes an ice maker and a water dispenser for added convenience. With its spacious storage capacity and advanced cooling technologies, the KitchenAid KRLB 1211 helps maintain the freshness and quality of your food items.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI