2. Home
  3. Domestic appliances
  4. Climate control
  5. Fireplaces
  6. Astria Fireplaces
  7. TAURUS ST Series

Astria Fireplaces TAURUS ST Series Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Astria Fireplaces TAURUS ST Series Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Page 1 of 2
TAURUS™ ST SERIES
P/N 900665-00, REV. NC, 04/2016
Fireplace Dimensions
VENT-FREE UNIVERSAL SEE-THROUGH FIREBOXES
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Framing Dimensions
Diagrams, illustrations and photographs are not to scale. Consult installation instructions.
Product designs, materials, dimensions, specifi cations, colors, and prices are subject to
change or discontinuance without notice.
44-1/4” Min.
40-1/4” Min.
36" Min. to
Facing Wall
22-3/4”
Min.
Facing
Wall
Wallboard
Wallboard
Gas Line
Facing Wall
(Base line)
NOTE: Gas line
may also be on
opposite side.
Nailing Flanges
Nails or
Wood
Screws
4-1/4”
3-1/8”
5
12"
4"
1-1/4”
1/2"
5/8"
2-1/4”
40"
17-1/2”
1-1/2”
3"
24"
36-1/2”
37-1/2”
42-1/2”
20-1/2”
11-1/2”
5-1/2”
1-1/2" Max.
3/8" Max.
4"
SAFE
ZONE
Combustible material must
not overlap more than 3/8"
onto black metal front face.
Nailing Flange
Drywall
Framing for Built-In Firebox Installation, Top View
Minimum from
firebox edge to
combustible material
Edge of
side firebox
opening
8" Min. from adjacent
wall to fireplace opening
NAILING FLANGES
Gas line
Electrical
Printed in U.S.A. © 2016 Innovative Hearth Products
P/N 900665-00 REV. NC 04/2016
Page 2 of 2
Clearances
TAURUS™ ST SERIES
Product Information
Listing Information
PFS
®
US
Report No. F09-130
These appliances comply with National
Safety Standards and are listed by PFS Cor-
poration to ANSI Z21.91 Ventless Firebox
Enclosures for Gas-Fired Unvented Decora-
tive Room Heaters and is approved for use
with appliances listed to ANSI Z21.11.2
decorative type unvented room heaters.
Cat. No. Model Description Ship. Weight Shipping Volume
F0382 TaurusSTZ2
Flush Faced 146 lb.s
26.7 Cu. Ft.
F0383 TaurusSTZ2
Louvered 146 lb.s
26.7 Cu. Ft.
42" Min.
0" to Wood
Floor
4" Min.
0" Min. Clearance to
Upper Frame/Wallboard
Ceiling
4" Min. from the Perpendicular
Side Wall to the Edge of Facial
1/2" Min. Clearance
to Combustibles
44-1/4”
22-3/4”
24"
INSTALLATION CLEARANCES
CAUTION: Use only the clearances specifi ed in Installation and Opera-
tion manual or on the fi rebox rating plate.
Minimum clearances to combustibles are:
Sides of outer casing 0” min.
Drywall to sides and top of front face 0” min.
Ceiling to opening 42” min.
Floor
CAUTION: Do not install the fi rebox directly on carpet or vinyl.
0” min.
Perpendicular walls, Right and Left 4” min.
Distance to Facing Walls 36” min.
Minimum Mantel Clearances
Supplied
Firebox
Hoods Must
Be Used
at All Ti mes
Wire-mesh
Screen
Firebox Top
Mantel Shelf
3"
6"
9-1/4”
Combustible
Material
Thickness
NOTE: All vertical
measurements are from
top of fireplace hood to
bottom of mantel shelf.
These minimum
clearances replace any
other recommended
clearances supplied
with your ANS Z21.11.2
approved gas logs.
Top Frame
(Combustible
Material)
12"
15"
18"
Note: Do not
cover louver
openings .
6" Min.
1-1/2” Max.
Wall board or facing material (above firebox) may be of combustible
material, including decorative mantel ornaments or other similar
projections off of the facing material.
Top View
PROJECTED INSTALLATION
Projected installations can extend any distance into the room. A projection
may be ideal as a partition between two otherwise common areas when
added to an existing, fi nished wall.
/