AVer CP Series OPS Installation Guide Page 2
6. You can now turn on the IFP system power.
7. Switch to the OPS source and the OPS will automatically power on.
8. You would now need to activate the windows 10 OS pre-installed on the system.
9. Launch the Windows setup screen and navigate to the “Update & Security” section.
10. Click on “Activation” and select the option under “Update product key”.
11. Once windows is activated, please launch internet explorer and go to:
https://www.microsoft.com/en-us/software-download/windows10
12. Click on “Update now” and run the “Windows10Upgrade.exe” application and follow the on screen
instructions. Please be patient as the upgrade process may take up to an hour or more.