OWNER’S MANUAL

© 2011 Hobart Welding Products

FORM: OM-252 735A 2011−06

Use above FORM number when ordering extra manuals.

Running Gear 251 451 For Champion

)

145 Models

DANGER! − Indicates a hazardous situation which, if not

avoided, will result in death or serious injury. The possible

hazards are shown in the adjoining symbols or explained

Beware of electric shock from wiring. Stop engine and

disconnect negative (−) cable from battery before install-

ing this kit. Reinstall all panels and covers.

guidelines in the Applications Manual for the Revised

manually lifting heavy parts or equipment.

Wear safety glasses with side shields.

CALIFORNIA PROPOSITION 65 WARNINGS

Welding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to cause birth defects and, in

some cases, cancer. (California Health & Safety Code Section 25249.5 et seq.)

This product contains chemicals, including lead, known to the state of California to cause cancer, birth defects, or other reproductive harm.

Wash hands after use.

252 734-A

5 602241 Washer, Flat .281idx0.625odx.065t Stl Pld Ansi.250 (4)

6 602207 Washer, Lock .255idx0.489odx.062t Stl Pld Split.250 (4)

7 115413 Nut, M06−1.0 .39hex .20h Stl Pld (4)

8 252704 Washer, Flat .656idx1.100odx.093t Stl Pld (4)

9 252696 Pin, Cotter .125 X 1.250 (2)

Item

1

when ordering replacement parts.

Use pliers to bend cotter