Minka Group 4631-106 User manual

Minka Group
Brand
Minka Group
Model
4631-106
Type
User manual

Minka Group 4631-106 is a versatile and stylish lighting fixture designed to elevate the ambiance of any room. This fixture features a sturdy mounting plate that securely attaches to a junction box, ensuring a stable and reliable installation. The fixture's thoughtfully engineered design allows for effortless wiring, with clear instructions and appropriately sized wire connectors to facilitate a seamless connection. The provided ground screw ensures proper grounding, enhancing electrical safety.

Minka Group 4631-106 is a versatile and stylish lighting fixture designed to elevate the ambiance of any room. This fixture features a sturdy mounting plate that securely attaches to a junction box, ensuring a stable and reliable installation. The fixture's thoughtfully engineered design allows for effortless wiring, with clear instructions and appropriately sized wire connectors to facilitate a seamless connection. The provided ground screw ensures proper grounding, enhancing electrical safety.

INSTALLATION INSTRUCTIONS
Item#4631-106 (New. 12/11/2017)
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 1
Fig. 2
MOUNTING THE FIXTURE (Fig.1)
1. Shut off the power at the fuse box or circuit
breaker. If necessary, remove the old fixture,
including the mounting hardware.
2. Carefully remove the fixture from the carton and
check that all parts are included as shown in the
illustration.
3. Attach the mounting plate (A) to the junction box
using the mounting screws (B) (Size:
#8-32N*L0.5”). The side of the mounting plate
marked “GND” must face out.
CONNECTING THE WIRES (Fig. 2)
4. At this point, connect the electrical wires as shown
in Fig. 2, making sure that all wire connectors are
secured. If your outlet box has a ground wire
(green or bare copper), connect the fixture’s
ground wire to it. Otherwise, connect the fixture’s
ground wire directly to the mounting plate using the
green screw provided. After wires are connected,
tuck them carefully inside the junction box.
FINISHING THE INSTALLATION (Fig.1)
5. Place fixture body (C) over mounting plate (A) and
fasten with screws (D).
6. Secure metal tube (E) into the fixture body (C).
7. Install the bulb(s) (H) (included) in accordance with
the fixture’s specifications. (DO NOT EXCEED
THE MAXIMUM WATTAGE RATING!). (NE PAS
DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!)
8. Put the glass shade (I) over the socket (F) and turn
to secure it to the fixture.
Your installation is now complete. Return power and
test the fixture.
Note: Illustration (Fig.1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
LA-2888E
FIXTURE
WIRES
Black or
Smooth
H
O
U
S
E
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
H
O
U
S
E
WIRES
White
(Neutral)
FIXTURE
WIRES
Green or
Bare
Copper
(Ground)
H
O
U
S
E
WIRES
Green
(Ground)
Set#A-021-108210
-Mounting Plate
-Ground Screw
-Mounting Screw*2
A
B
C
D
E
F
H
I
  • Page 1 1

Minka Group 4631-106 User manual

Minka Group
Brand
Minka Group
Model
4631-106
Type
User manual

Minka Group 4631-106 is a versatile and stylish lighting fixture designed to elevate the ambiance of any room. This fixture features a sturdy mounting plate that securely attaches to a junction box, ensuring a stable and reliable installation. The fixture's thoughtfully engineered design allows for effortless wiring, with clear instructions and appropriately sized wire connectors to facilitate a seamless connection. The provided ground screw ensures proper grounding, enhancing electrical safety.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI