2. Virgo
  3. Cutting Manager

Virgo Cutting Manager User manual

  • Hello! I've reviewed the user manual for the VIRGO CM cutting manager. This document provides detailed information about how to use the software, from basic operations like setting cutting parameters to advanced techniques like distortion correction and cut settings. I am ready to answer your questions about its functions and capabilities.
  • What is the range for blade strength?
    What is the most common cutting speed for label cutting?
    Where can I find the report history file?
    How can I update the software?
USER MANUAL
Virgo cutting manager
(VIRGO CM)
1
17
16
2
15
6 7
8
14
10
9
12
3
13
4 5
Virgo cutting manager (VIRGO CM)
USER INTERFACE
11
20
18 19
2
21 22
23
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.

12.

13.


14.     

15.
16.
17.
18.
19. 
20. 
21.
22.
23.












-x +y
+x -y


Settings (24)
1
2
3
4
15
6
7
8
9
101112
1.

2.


3.


13
14
ADVANCED OPTIONS
24
25
24.
25.
26.
27.
28.
26
27
28
5


X axis
CUTTING
DIRECTION
-
-
CUTTING
DIRECTION
+
+
STEP 1
VERIFY THE
CORRESPONDENCE OF
THE CUT WITH THE PRINT
STEP 2
AT THE POINT INDICATED,
ADJUST OFFSET TO ALIGN
THE CUT WITH THE PRINT
STEP 3
INCREASE OR DECREASE
THE “STRETCH”
PARAMETER (X)
-
4.
5.

6.



7.


Y axis 

CUTTING
DIRECTION
-
-
CUTTING
DIRECTION
+
+
STEP 1
VERIFY THE
CORRESPONDENCE OF THE
CUT WITH THE PRINT
STEP 2
AT THE POINT INDICATED,
ADJUST OFFSET TO ALIGN
THE CUT WITH THE PRINT
STEP 3
INCREASE OR DECREASE
THE “COMPRESSION”
PARAMETER (Y)
-
8.

9.               





10.
11.
12.
13. Your artwork may be not printed straight



Usually the artwork should not be too much rotated


CUTTING
DIRECTION
CUTTING
DIRECTION


STEP
1. Check the match between the cut with
the print.
2. Rotate the die-cut to nd the correct
inclination (until the cut lines and the
printed lines are parallel).
3. Adjust the osets to match the cut lines
to the printed lines
1 2 3
CUTTING
DIRECTION
Report (25)
14.




C:/Virgo Cutting manager/Report/CutHistory.txt”.



    




             

1.
2.
3.
HOW TO UPDATE SOFTWARE
15.




DEVICE SELECTOR
/