Revopoint 3D S1 Handheld Stabilizer User manual
- Type
- User manual
Handheld Stabilizer
User Manual
V1.0
Content
Product Introduction ................................................................................................................................................................................... 3
Specifications ......................................................................................................................................................................................... 3
Functions Overview ..................................................................................................................................................................................... 4
Charging the Handheld Stabilizer ............................................................................................................................................... 4
Connecting the Handheld Stabilizer to MINI 3D Scanners ...................................................................................................... 5
Using the Handheld Stabilizer with a PC via Wi-Fi .............................................................................................................. 5
Using the Handheld Stabilizer with a Smartphone via Wi-Fi ......................................................................................... 6
Product Introduction
The S1 Handheld Stabilizer’s gyroscopes provide high-precision stabilization for handheld scanning, helping
to avoid loss of tracking and providing a smoother scan. The motorized axes allow you to smoothly pan or
tilt the scanner as you move around the object.
Specifications
Product Name
Handheld Stabilizer
Model
S1
Compatible Devices
MINI
Power Output
5V/2A
Dimension
213mm x 84.5mm x 45mm
Net Weight
510g
Battery Type
Lithium
Battery Capacity
4000mAh
Operating Time
Around 6 hours
Recharging Time
4.5 hours
Stabilized Axes
2
Controllable Range
Tilt ±45°; Pan ±85°
Connection Type
Bluetooth
Charging Port Type
USB Type-C
Working Temperature
10°C‒40°C
Package List
Handheld Stabilizer x1, Type-A to C USB Cable
x1, Bracket x1, Strap x1
Note
*Operating time may vary depending on
different scenarios and environments.
Functions Overview
① Bluetooth LED: The LED light flashes blue continuously while waiting for a connection. Once connected
successfully, the LED turns solid blue.
② Joystick: Adjusts the tilt and pan.
③ 1/4 Threaded Hole: To mount the phone holder bracket.
④ ON/OFF Switch: Long-press to power on/off the Handheld Stabilizer. Press twice to change between
Follow/Lock Mode.
⑤ Battery Level LED: Shows the remaining battery level. The LED light flashes continuously when charging
and turns solid white when fully charged.
⑥ Start/Pause Button: Press to start or pause the scan. Press twice to recenter the Handheld Stabilizer.
*Follow Mode: The stabilizer follows the object automatically.
*Lock Mode: The stabilizer locks itself in a fixed position.
Charging the Handheld Stabilizer
1. Connect the USB-Type A end of the cable to an adapter, then plug it into a socket.
2. Plug the USB-Type-C end into the Handheld Stabilizer’s Type-C port.
3. The Handheld Stabilizer is fully charged when the battery LED turns solid white.
Connecting the Handheld Stabilizer to MINI 3D Scanners
1. Clip the MINI into the quick-release slot on top of the Handheld Stabilizer.
2. Connect and secure the Micro-B USB cable to the scanner.
For freedom of movement, connecting the MINI via Wi-Fi is recommended when using the Handheld
Stabilizer.
Using the Handheld Stabilizer with a PC via Wi-Fi
1. Power on the Handheld Stabilizer
Long-press the ON/OFF button to power on the Handheld Stabilizer. The Bluetooth LED flashes blue
continuously when it is ready for connection.
2. Adding the Handheld Stabilizer via Bluetooth
Open your PC's Bluetooth settings and look for a device named “REVO_STABILIZER”, then click Connect to
add the Handheld Stabilizer.
3. Connecting to a PC’s Wi-Fi with MINI
Open the PC’s Wi-Fi settings and connect to the MINI's Wi-Fi SSID.
4. Open Revo Scan to Start your Scan
1. Adjust the scanner’s position with the Handheld Stabilizer joystick.
2. Press the Handheld Stabilizer’s Start/Pause button to begin scanning.
Using the Handheld Stabilizer with a Smartphone via Wi-Fi
1. Attaching the bracket and phone holder
A. Insert and screw the bracket into the Handheld Stabilizer’s 1/4 threaded
hole.
B. Attach the Phone Holder to the bracket
C. Insert your phone into the clamp.
Note: Use the Phone Holder that came with your MINI
2. Connecting to a smartphone’s Wi-fi with MINI
Open the smartphone's Wi-FI settings and connect to the MINI's Wi-Fi SSID.
3. Open Revo Scan to Start your Scan
1. Adjust the scanner’s position with the Handheld Stabilizer joystick.
2. Press the Handheld Stabilizer’s Start/Pause button to begin scanning.
FCC Warning：
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference , and (2) this device must accept any
interference received , including interference that may cause undesired operation .
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver .
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected .
—Consult the dealer or an experienced radio / TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Revopoint 3D S1 Handheld Stabilizer User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI