6905-5916 Gunmetal Grid Shelves ©2015 Whitmor, Inc.
Assembly
Time:
Less than
15 minutes.
This product is intended for
shoe and accessory storage.
Tools Needed: No tools required.
MADE IN CHINA
Printed in China
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
NEED HELP? For help with assembly, or if you are missing a part,
please call Whitmor’s Customer Service Department, 1-888-944-8667
between 8 a.m. and 4:30 p.m. (Central Standard Time) Monday
through Friday. Or email: help@whitmor.com. Visit us online at
www.whitmor.com
Rev#0 12.16.14
A 3 ea
Wire grid shelf
B 2 ea
Wire grid side
D 4 ea
Stacking pin
Part Reference
A
B
C
D
F8120
F8121
F8122
F8123
C 4 ea
Foot
SINGLE UNIT ASSEMBLY: Clip 3 wire grid shelves
(A) onto wire grid sides (B) by placing the shelves on top of
the horizontal wire on the side frames. Press together until
firm. Install the bottom feet (C) by screwing them into the
bottom of the frames.
A
DD
D
D
A
A
B
C
C
C
C
B
STACKING MULTIPLE UNITS: If
you purchased more than one unit, you
can stack multiple units. Remove the top
plugs from the bottom unit. Screw the
stacking pin on the bottom of the top unit
in place of the feet. Place the top unit on
the bottom unit.