Panasonic KX-TG7432 User manual

Thank you for purchasing a Panasonic product.

This unit is compatible with Caller ID. You must subscribe to the appropriate

service offered by your service provider/telephone company.

Please read these operating instructions before using the unit and save

them for future reference.

For assistance, visit our website:

http://www.panasonic.com/help for customers in the U.S.A. or Puerto

Rico.

Charge the batteries for about 7 hours before initial use.

Consulte “Guía Rápida Española”, página 48.

Operating Instructions

Expandable Digital Cordless

Answering System

Model shown is KX-TG7431.

with 2 Handsets

Model No. KX-TG7432

with 3 Handsets

Model No. KX-TG7433

with 4 Handsets

Model No. KX-TG7434

Model No. KX-TG7431

Panasonic’s environmental declaration labels

This mark is an environmental label

showing that the products are certified

as Panasonic’s Green Products.

Standby power consumption

reduced by 59%

TG743x(e).book Page 1 Monday, December 8, 2008 1:36 PM

Table of Contents

2

Introduction

Model composition . . . . . . . . . . . . . . . 3

Accessory information. . . . . . . . . . . . . 3

Important Information

For your safety . . . . . . . . . . . . . . . . . . 5

Important safety instructions . . . . . . . . 6

For best performance . . . . . . . . . . . . . 6

Specifications . . . . . . . . . . . . . . . . . . . 7

Other information. . . . . . . . . . . . . . . . . 7

Getting Started

Setting up . . . . . . . . . . . . . . . . . . . . . . 8

Note when setting up. . . . . . . . . . . . . . 9

Controls . . . . . . . . . . . . . . . . . . . . . . . 10

Display. . . . . . . . . . . . . . . . . . . . . . . . 11

Temporary switch of the display mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Initial settings. . . . . . . . . . . . . . . . . . . 12

Making/Answering Calls

Making calls. . . . . . . . . . . . . . . . . . . . 13

Answering calls . . . . . . . . . . . . . . . . . 13

Useful features during a call . . . . . . . 14

Shared Phonebook

Shared phonebook . . . . . . . . . . . . . . 16

Programming

Programmable settings . . . . . . . . . . . 18

Special programming . . . . . . . . . . . . 23

Registering a unit . . . . . . . . . . . . . . . 26

Caller ID Service

Using Caller ID service . . . . . . . . . . . 27

Caller list . . . . . . . . . . . . . . . . . . . . . . 28

Answering System

Answering system . . . . . . . . . . . . . . . 30

Turning the answering system on/off. 30

Greeting message. . . . . . . . . . . . . . . 31

Listening to messages using the base

unit . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Listening to messages using the

handset . . . . . . . . . . . . . . . . . . . . . . . 32

Remote operation . . . . . . . . . . . . . . . 33

Answering system settings . . . . . . . . 34

Voice Mail Service

Voice mail service. . . . . . . . . . . . . . . 36

Intercom/Locator

Intercom . . . . . . . . . . . . . . . . . . . . . . 38

Handset locator . . . . . . . . . . . . . . . . 38

Transferring calls, conference calls . 38

Useful Information

Belt clip. . . . . . . . . . . . . . . . . . . . . . . 39

Wall mounting. . . . . . . . . . . . . . . . . . 39

Error messages . . . . . . . . . . . . . . . . 40

Troubleshooting . . . . . . . . . . . . . . . . 41

FCC and other information . . . . . . . . 46

Guía Rápida Española

Guía Rápida Española . . . . . . . . . . . 48

Appendix

Customer services . . . . . . . . . . . . . . 56

Warranty (For United States and Puerto

Rico) . . . . . . . . . . . . . . . . . . . . . . . . . 57

Index

Index. . . . . . . . . . . . . . . . . . . . . . . . . 59

TG743x(e).book Page 2 Monday, December 8, 2008 1:36 PM

Introduction

3

For assistance, please visit http://www.panasonic.com/help

Model composition

*1 Feature differences:

Intercom calls can be made between the handsets by purchasing and registering

one or more optional handsets (page 4).

Accessory information

Supplied accessories

*1 The handset cover comes attached to the handset.

Series Model No. Base unit Handset

Part No. Part No. Quantity

KX-TG7431

series

KX-TG7431*1 KX-TG7431 KX-TGA740 1

KX-TG7432 KX-TG7431 KX-TGA740 2

KX-TG7433 KX-TG7431 KX-TGA740 3

KX-TG7434 KX-TG7431 KX-TGA740 4

No. Accessory item/

Order number

Quantity

KX-TG

7431

KX-TG

7432

KX-TG

7433

KX-TG

7434

1AC adaptor/

PQLV219Z

1234

2Telephone line cord/

PQJA10075Z

1111

3Rechargeable batteries/

HHR-4DPA

(Part No. HHR-65AAABU or

N4DHYYY00002)

2468

4Handset cover*1/

PNYNTGA641TR

1234

5Belt clip/

PNKE1029Z1

1234

6Charger/

PNWETG7432B

–123

123456

TG743x(e).book Page 3 Monday, December 8, 2008 1:36 PM

Introduction

4

For assistance, please visit http://www.panasonic.com/help

Additional/replacement accessories

Please contact your nearest Panasonic dealer for sales information (page 56).

*1 Replacement batteries may have a different capacity from that of the supplied

batteries.

Expanding your phone system

You can expand your phone system by registering optional handsets (6 max.) to a

single base unit.

LOptional handsets may be a different color from that of the supplied handsets.

Optional handset feature overview

Accessory item Order number

Rechargeable

batteries

HHR-4DPA*1

LTo order, please call 1-800-332-5368 or visit

http://www.panasonic.com/batterystore

Battery requirement:

– Nickel metal hydride (Ni-MH) type battery

– 2 AAA (R03) batteries for each of every handsets

Headset KX-TCA60, KX-TCA86, KX-TCA92, KX-TCA93, KX-TCA94

T-adaptor KX-J66

Battery back-up

power supply

KX-TCA230

Feature KX-TGA740 KX-TGA641

Handset

Display size 2.1 inches 1.8 inches

Control type Joystick

(Up/down/left/right)

Navigator key

(Up/down)

Temporary switch of the

display mode (page 11)

r–

Display mode (page 25) r–

Message list (page 32) r–

TG743x(e).book Page 4 Monday, December 8, 2008 1:36 PM

Important Information

5

For assistance, please visit http://www.panasonic.com/help

For your safety

To prevent severe injury and loss of life/

property, read this section carefully before

using the product to ensure proper and safe

operation of your product.

WARNING

Power connection

LUse only the power source marked on the

product.

LDo not overload power outlets and

extension cords. This can result in the risk

of fire or electric shock.

LCompletely insert the AC adaptor/power

plug into the power outlet. Failure to do so

may cause electric shock and/or excessive

heat resulting in a fire.

LRegularly remove any dust, etc. from the

AC adaptor/power plug by pulling it from the

power outlet, then wiping with a dry cloth.

Accumulated dust may cause an insulation

defect from moisture, etc. resulting in a fire.

LUnplug the product from power outlets if it

emits smoke, an abnormal smell, or makes

an unusual noise. These conditions can

cause fire or electric shock. Confirm that

smoke has stopped emitting and contact

the Panasonic Call Center at 1-800-211-

PANA (1-800-211-7262).

LUnplug from power outlets and never touch

the inside of the product if its casing has

been broken open.

LNever touch the plug with wet hands.

Danger of electric shock exists.

Installation

LTo prevent the risk of fire or electrical shock,

do not expose the product to rain or any

type of moisture.

LDo not place or use this product near

automatically controlled devices such as

automatic doors and fire alarms. Radio

waves emitted from this product may cause

such devices to malfunction resulting in an

accident.

LDo not allow the AC adaptor or telephone

line cord to be excessively pulled, bent or

placed under heavy objects.

Operating safeguards

LUnplug the product from power outlets

before cleaning. Do not use liquid or

aerosol cleaners.

LDo not disassemble the product.

LDo not spill liquids (detergents, cleansers,

etc.) onto the telephone line cord plug, or

allow it to become wet at all. This may

cause a fire. If the telephone line cord plug

becomes wet, immediately pull it from the

telephone wall jack, and do not use.

Medical

LConsult the manufacturer of any personal

medical devices, such as pacemakers or

hearing aids, to determine if they are

adequately shielded from external RF

(radio frequency) energy. (The product

operates in the frequency range of 1.92

GHz to 1.93 GHz, and the RF transmission

power is 115 mW (max.).)

LDo not use the product in health care

facilities if any regulations posted in the

area instruct you not to do so. Hospitals or

health care facilities may be using

equipment that could be sensitive to

external RF energy.

CAUTION

Installation and relocation

LNever install telephone wiring during an

electrical storm.

LNever install telephone line jacks in wet

locations unless the jack is specifically

designed for wet locations.

LNever touch uninsulated telephone wires or

terminals unless the telephone line has

been disconnected at the network interface.

LUse caution when installing or modifying

telephone lines.

LThe AC adaptor is used as the main

disconnect device. Ensure that the AC

outlet is installed near the product and is

easily accessible.

LThis product is unable to make calls when:

– the handset batteries need recharging or

have failed.

– there is a power failure.

TG743x(e).book Page 5 Monday, December 8, 2008 1:36 PM

Important Information

6

For assistance, please visit http://www.panasonic.com/help

Battery

LWe recommend using the batteries noted

on page 4. USE ONLY rechargeable

Ni-MH batteries AAA (R03) size.

LDo not mix old and new batteries.

LDo not open or mutilate the batteries.

Released electrolyte from the batteries is

corrosive and may cause burns or injury to

the eyes or skin. The electrolyte is toxic and

may be harmful if swallowed.

LExercise care when handling the batteries.

Do not allow conductive materials such as

rings, bracelets, or keys to touch the

batteries, otherwise a short circuit may

cause the batteries and/or the conductive

material to overheat and cause burns.

LCharge the batteries provided with or

identified for use with this product only, in

accordance with the instructions and

limitations specified in this manual.

LOnly use a compatible base unit (or

charger) to charge the batteries. Do not

tamper with the base unit (or charger).

Failure to follow these instructions may

cause the batteries to swell or explode.

Attention:

A nickel metal hydride battery that is

recyclable powers the product you have

purchased.

Please call 1-800-8-BATTERY (1-800-822-

8837) for information on how to recycle this

battery.

Important safety

instructions

When using your product, basic safety

precautions should always be followed to

reduce the risk of fire, electric shock, and

injury to persons, including the following:

1. Do not use this product near water for

example, near a bathtub, washbowl,

kitchen sink, or laundry tub, in a wet

basement or near a swimming pool.

2. Avoid using a telephone (other than a

cordless type) during an electrical storm.

There may be a remote risk of electric

shock from lightning.

3. Do not use the telephone to report a gas

leak in the vicinity of the leak.

4. Use only the power cord and batteries

indicated in this manual. Do not dispose of

batteries in a fire. They may explode.

Check with local codes for possible special

disposal instructions.

SAVE THESE INSTRUCTIONS

For best performance

Base unit location/avoiding noise

The base unit and other compatible Panasonic

units use radio waves to communicate with

each other.

LFor maximum coverage and noise-free

communications, place your base unit:

– at a convenient, high, and central

location with no obstructions between

the handset and base unit in an indoor

environment.

– away from electronic appliances such as

TVs, radios, personal computers,

wireless devices, or other phones.

– facing away from radio frequency

transmitters, such as external antennas

of mobile phone cell stations. (Avoid

putting the base unit on a bay window or

near a window.)

LCoverage and voice quality depends on the

local environmental conditions.

LIf the reception for a base unit location is not

satisfactory, move the base unit to another

location for better reception.

Environment

LKeep the product away from electrical noise

generating devices, such as fluorescent

lamps and motors.

LThe product should be kept free from

excessive smoke, dust, high temperature,

and vibration.

LThe product should not be exposed to direct

sunlight.

LDo not place heavy objects on top of the

product.

TG743x(e).book Page 6 Monday, December 8, 2008 1:36 PM

Important Information

7

For assistance, please visit http://www.panasonic.com/help

LWhen you leave the product unused for a

long period of time, unplug the product from

the power outlet.

LThe product should be kept away from heat

sources such as heaters, kitchen stoves,

etc. It should not be placed in rooms where

the temperature is less than 0 °C (32 °F) or

greater than 40 °C (104 °F). Damp

basements should also be avoided.

LThe maximum calling distance may be

shortened when the product is used in the

following places: Near obstacles such as

hills, tunnels, underground, near metal

objects such as wire fences, etc.

LOperating the product near electrical

appliances may cause interference. Move

away from the electrical appliances.

Routine care

LWipe the outer surface of the product

with a soft moist cloth.

LDo not use benzine, thinner, or any

abrasive powder.

Notice for product disposal, transfer, or

return

LThis product can store your private/

confidential information. To protect your

privacy/confidentiality, we recommend that

you erase information such as phonebook

or caller list entries from the memory before

you dispose of, transfer, or return the

product.

Specifications

■Standard:

DECT 6.0 (Digital Enhanced

Cordless Telecommunications 6.0)

■Frequency range:

1.92 GHz to 1.93 GHz

■RF transmission power:

115 mW (max.)

■Power source:

120 V AC, 60 Hz

■Power consumption:

Base unit:

Standby: Approx. 1.1 W

Maximum: Approx. 4.4 W

Charger:

Standby: Approx. 0.1 W

Maximum: Approx. 2.6 W

■Operating conditions:

0°C – 40 °C (32 °F – 104 °F), 20 % – 80 %

relative air humidity (dry)

Note:

LDesign and specifications are subject to

change without notice.

LThe illustrations in these instructions may

vary slightly from the actual product.

Other information

CAUTION: Risk of explosion if battery is

replaced by an incorrect type. Dispose of used

batteries according to the instructions.

Notice

ENERGY STAR

As an ENERGY STAR® Participant,

Panasonic has determined that this product

meets the ENERGY STAR guidelines for

energy efficiency. ENERGY STAR is a U.S.

registered mark.

TG743x(e).book Page 7 Monday, December 8, 2008 1:36 PM

Getting Started

8

For assistance, please visit http://www.panasonic.com/help

Setting up

Connections

LUse only the supplied Panasonic AC

adaptor PQLV219.

■Base unit

*For DSL/ADSL service users

■Charger

Battery installation

LUSE ONLY Ni-MH batteries AAA

(R03) size.

LDo NOT use Alkaline/Manganese/Ni-

Cd batteries.

LConfirm correct polarities (S, T).

Battery charge

Charge for about 7 hours.

LWhen the batteries are fully charged,

the charge indicator goes off.

Base

unit Base

unit

Correct Wrong

Hook

(120 V AC,

60 Hz)

To single-line

telephone jack

(RJ11C)

DSL/ADSL filter*

(Not supplied)

“Click”

Press plug firmly.

(120 V AC, 60 Hz)

Hooks

Rechargeable Ni-MH ONLY

Confirm “Charging”

is displayed.

TG743x(e).book Page 8 Monday, December 8, 2008 1:36 PM

Getting Started

9

For assistance, please visit http://www.panasonic.com/help

Note when setting up

Note for connections

LThe AC adaptor must remain

connected at all times. (It is normal for

the adaptor to feel warm during use.)

LThe AC adaptor should be connected

to a vertically oriented or floor-

mounted AC outlet. Do not connect

the AC adaptor to a ceiling-mounted

AC outlet, as the weight of the adaptor

may cause it to become disconnected.

During a power failure

The unit will not work during a power

failure. We recommend connecting a

corded-type telephone (without AC

adaptor) to the same telephone line or to

the same telephone line jack using a

Panasonic T-adaptor (page 4).

Emergency power can be supplied to the

unit by connecting a Panasonic battery

back-up power supply noted on page 4.

Note for battery installation

LUse the supplied rechargeable

batteries. For replacement, we

recommend using the Panasonic

rechargeable batteries noted on page

4, 6.

LWipe the battery ends (S, T) with a

dry cloth.

LAvoid touching the battery ends (S,

T) or the unit contacts.

Note for battery charge

LIt is normal for the handset to feel

warm during charging.

LClean the charge contacts of the

handset, base unit, and charger with a

soft and dry cloth once a month. Clean

more often if the unit is exposed to

grease, dust, or high humidity.

Battery level

Note:

LThe batteries need to be charged if:

– the handset alerts you with a voice

announcement (talking battery

alert) after you finish talking or

listening to a message.

– the handset beeps while you are

engaged in a call or operating the

answering system remotely.

Panasonic Ni-MH battery

performance (supplied batteries)

*1 When the clarity booster feature is

turned on (page 15): 3 hours max.

Note:

LActual battery performance depends

on a combination of how often the

handset is in use and how often it is

not in use (standby).

LEven after the handset is fully

charged, the handset can be left on

the base unit or charger without any ill

effect on the batteries.

LThe battery level may not be

displayed correctly after you replace

the batteries. In this case, place the

handset on the base unit or charger

and let it charge for at least 7 hours.

Icon Battery level

&High

(Medium

)Low

0)4Needs charging.

0Empty

Operation Operating time

In continuous

use

5 hours max.*1

Not in use

(standby)

11 days max.

TG743x(e).book Page 9 Monday, December 8, 2008 1:36 PM

Getting Started

10

For assistance, please visit http://www.panasonic.com/help

Controls

Handset

ACharge indicator

Ringer indicator

Message indicator

BSpeaker

C{C} (TALK)

D{s} (SP-PHONE: Speakerphone)

EHeadset jack

FDial keypad ({*}: TONE)

GReceiver

HDisplay

I{OFF}

J{FLASH} {CALL WAIT}

KMicrophone

LCharge contacts

■Control type

A Soft keys

The handset features 2 soft keys and

a joystick. By pressing a soft key, or by

pressing the center of the joystick, you

can select the feature shown directly

above it on the display.

B Joystick

By pushing the joystick ({^}, {V}, {<},

or {>}) repeatedly, you can:

– scroll through (up, down, left, or

right) various lists or items

– adjust the receiver or speaker

volume (up or down) while talking

LAs all multiple items cannot be

displayed on screen at the same

time, you can quickly search the

desired item to move screens by

pushing the joystick right or left,

instead of scrolling down or up line

by line (page 25).

Base unit

ACharge contacts

BSpeaker

C{ERASE}

D{■} (STOP)

E{^}/{V} (VOL.: Volume up/down)

{7}/{8} (Repeat/Skip)

F{6} (Play)

Message indicator

G{LOCATOR}

H{ANSWER ON}

ANSWER ON indicator

B

G

A

H

I

J

K

C

D

F

E

A

B

L

DC E F G H

A B

TG743x(e).book Page 10 Monday, December 8, 2008 1:36 PM

Getting Started

11

For assistance, please visit http://www.panasonic.com/help

Display

Handset display items

Temporary switch of

the display mode

You can select to display either a single

item or multiple items on one screen at a

time for the following features:

– menu list, phonebook list, caller list,

redial list, message list, and call block

list

– handset top menu icons in function

menu

The following icons are shown when you

press down on the center of the joystick

in standby mode.

You can temporarily switch the display

mode as follows by pressing the right

soft key shown when viewing the lists or

selecting menu icons:

–{MULTI}: Multiple entries/all menu

icons are shown on one screen at a

time.

–{SINGLE}: An entry/a menu icon is

shown on one screen in large

characters at a time.

Note:

LYou can set the unit to always show a

single item or multiple items

beforehand by selecting “Single

item” or “Multi items” as the

display mode setting (page 25).

LWhen “Multi items” is selected as

the display mode, you can switch the

screen to confirm the detailed

information by pressing {SINGLE}.

Item Meaning

wWithin range of a base unit

_Out of range of a base unit

SThe line is in use.

LWhen flashing:

– The call is put on

hold.

– The answering

system is answering

a call.

LWhen flashing rapidly:

An incoming call is now

being received.

sSpeaker is on. (page 13)

~Ringer volume is off.

(page 21)

&Silent mode is on. (page

23)

(Clarity booster is on.

(page 15)

EAlarm is on. (page 23)

mHandset number

&Battery level

$Blocked call (page 24)

Available for: KX-TGA740 handset

Icon Feature

WCaller list

sAnswering device

#V.M. access

xIntercom

"Initial setting

!Customer support

TG743x(e).book Page 11 Monday, December 8, 2008 1:36 PM

Getting Started

12

For assistance, please visit http://www.panasonic.com/help

Initial settings

Display language

You can select either “English” or

“Español” as the display language.

The default setting is “English”.

1{MENU} (center of joystick) i

{#}{1}{1}{0}

2{V}/{^}: Select the desired setting.

3Press down the center of the joystick

to save. i {OFF}

Voice guidance language

You can select either “English” or

“Español” as the voice guidance

language of the answering system. This

setting also determines the voice

announcement language of the talking

alarm clock and talking battery alert. The

default setting is “English”.

1{MENU} (center of joystick) i

{#}{1}{1}{2}

2{V}/{^}: Select the desired setting.

3{SAVE} i {OFF}

Dialing mode

If you cannot make calls, change this

setting according to your telephone line

service. The default setting is “Tone”.

“Tone”: For tone dial service.

“Pulse”: For rotary/pulse dial service.

1{MENU} (center of joystick) i

{#}{1}{2}{0}

2{V}/{^}: Select the desired setting.

3{SAVE} i {OFF}

Date and time

1{MENU} (center of joystick) i

{#}{1}{0}{1}

2Enter the current month, date, and

year by selecting 2 digits for each.

Example: July 15, 2009

{0}{7} {1}{5} {0}{9}

3{OK}

4Enter the current hour and minute

(12-hour clock format) by selecting 2

digits for each.

Example: 9:30

{0}{9} {3}{0}

5{AM/PM}: Select “AM” or “PM”.

6{SAVE} i {OFF}

Note:

LWhen English is selected as the

display language, 12-hour clock

format is used. When Spanish is

selected, 24-hour clock format is

used.

LTo correct a digit, push the joystick left

or right to move the cursor to the digit,

then make the correction.

LThe date and time may be incorrect

after a power failure. In this case, set

the date and time again.

Symbol meaning:

Example: {V}/{^}: “Off”

Push the joystick down or up to

select the words in quotations.

TG743x(e).book Page 12 Monday, December 8, 2008 1:36 PM

Making/Answering Calls

13

For assistance, please visit http://www.panasonic.com/help

Making calls

1Lift the handset and dial the phone

number.

LTo correct a digit, press {CLEAR}.

2Press {C} or {CALL}.

3When you finish talking, press

{OFF} or place the handset on the

base unit or charger.

Using the speakerphone

1Dial the phone number and press

{s}.

LSpeak alternately with the other

party.

2When you finish talking, press

{OFF}.

Note:

LFor best performance, use the

speakerphone in a quiet environment.

LTo switch back to the receiver, press

{C}.

Adjusting the receiver or speaker

volume

Push the joystick up or down repeatedly

while talking.

Making a call using the redial list

The last 5 phone numbers dialed are

stored in the redial list (each 48 digits

max.).

1{REDIAL}

2{V}/{^}: Select the desired phone

number.

3{C}

Erasing a number in the redial list

1{REDIAL}

2{V}/{^}: Select the desired phone

number. i {ERASE}

3{V}/{^}: “Yes” i {SELECT}

4{OFF}

Pause (for PBX/long distance service

users)

A pause is sometimes required when

making calls using a PBX or long

distance service. When storing a calling

card access number and/or PIN in the

phonebook, a pause is also needed

(page 17).

Example: If you need to dial the line

access number “9” when making outside

calls with a PBX:

1{9} i {PAUSE}

2Dial the phone number. i {C}

Note:

LA 3.5 second pause is inserted each

time {PAUSE} is pressed. Repeat as

needed to create longer pauses.

Answering calls

When a call is being received, the ringer

indicator flashes rapidly.

1Lift the handset and press {C} or

{s} when the unit rings.

LYou can also answer the call by

pressing any dial key from {0} to

{9}, {*}, or {#}. (Any key

answer feature)

2When you finish talking, press

{OFF} or place the handset on the

base unit or charger.

Auto talk

You can answer calls simply by lifting the

handset off the base unit or charger. You

do not need to press {C}. To turn this

feature on, see page 20.

TG743x(e).book Page 13 Monday, December 8, 2008 1:36 PM

Making/Answering Calls

14

For assistance, please visit http://www.panasonic.com/help

Adjusting the handset ringer volume

Push the joystick up or down repeatedly

to select the desired volume while the

handset is ringing for an incoming call.

Note:

LYou can also program the handset

ringer volume beforehand (page 21).

Temporary handset ringer off

While the handset is ringing for a call,

you can turn the ringer off temporarily by

pressing {~}.

Adjusting the base unit ringer volume

Press {^} or {V} repeatedly to select the

desired volume.

LTo turn the ringer off, press and hold

{V} until the unit beeps 2 times.

Useful features during

a call

Hold

This feature allows you to put an outside

call on hold.

1Press {HOLD}, then press {OFF}

during an outside call.

2To release hold, press {C}.

LAnother handset user can take

the call by pressing {C}.

Note:

LIf a call is kept on hold for more than 9

minutes, an alarm tone starts to sound

and the ringer indicator on the

handset flashes rapidly. After 1

additional minute on hold, the call is

disconnected.

LIf another phone is connected to the

same line (page 9), you can also take

the call by lifting its handset.

Mute

While mute is turned on, you can hear

the other party, but the other party

cannot hear you.

1Press {MUTE} during an outside

call.

L{MUTE} flashes.

2To return to the conversation, press

{MUTE} again.

Note:

L{MUTE} is a soft key visible on the

handset display during a call.

Flash

{FLASH} allows you to use the special

features of your host PBX such as

transferring an extension call, or

accessing optional telephone services.

Note:

LTo change the flash time, see page

21.

For call waiting or Call Waiting

Caller ID service users

To use call waiting, you must first

subscribe to the call waiting service of

your service provider/telephone

company.

This feature allows you to receive calls

while you are already talking on the

phone. If you receive a call while on the

phone, you will hear a call waiting tone.

If you subscribe to both Caller ID and

Call Waiting with Caller ID services,

the 2nd caller’s information is displayed

after you hear the call waiting tone on the

handset.

1Press {CALL WAIT} to answer the

2nd call.

2To switch between calls, press

{CALL WAIT}.

TG743x(e).book Page 14 Monday, December 8, 2008 1:36 PM

Making/Answering Calls

15

For assistance, please visit http://www.panasonic.com/help

Note:

LPlease contact your service

provider/telephone company for

details and availability of this service

in your area.

Temporary tone dialing (for

rotary/pulse service users)

You can temporarily switch the dialing

mode to tone when you need to access

touch-tone services (for example,

answering services, telephone banking

services, etc.).

Press {*} (TONE) before entering

access numbers which require tone

dialing.

Handset clarity booster

This feature can improve sound clarity

when the handset is used in an area

where there may be interference. During

an outside call, this feature is turned on

automatically when necessary.

LWhen this feature is turned on, (

is displayed.

LWhile this feature is turned on, the

battery operating time is shortened

(page 9).

Call share

This feature allows you to join an

existing outside call.

To join the conversation, press {C}

when the other handset is on an outside

call.

Note:

LA maximum of 4 parties (including 1

outside party) can join a conversation

using 3 extensions.

TG743x(e).book Page 15 Monday, December 8, 2008 1:36 PM

Shared Phonebook

16

For assistance, please visit http://www.panasonic.com/help

Shared phonebook

The shared phonebook allows you to

make calls without having to dial

manually. Any handset registered to the

base unit can use the shared

phonebook. You can add 50 names and

phone numbers to the shared

phonebook.

Important:

LOnly 1 person can access the shared

phonebook at a time.

LCaller ID subscribers can use ringer

ID features (page 28).

Adding entries

1{C}

2{ADD}

3Enter the party’s name (16

characters max.). i {OK}

4Enter the phone number (32 digits

max.). i {OK}

LIf you do not need to assign the

ringer ID, go to step 7.

5{V}/{^}: “Set Ringer ID” i

{SELECT}

6{V}/{^}: Select the desired setting

(page 28). i {OK}

7{SAVE}

LTo add other entries, repeat from

step 2.

8{OFF}

Note:

LIf you select “No Ringer ID”

(default), the handset uses the ringer

tone you selected on page 21 when a

call is received from that caller.

LWhen you assign the ringer ID to an

entry in the shared phonebook using

one handset, it is applied for all

handsets.

Character table for entering names

LTo enter another character that is

located on the same dial key, first

push the joystick right to move the

cursor to the next space.

Correcting a mistake

Use the joystick to move the cursor to

the character or number you want to

erase, then press {CLEAR}. Enter the

appropriate character or number.

LPress and hold {CLEAR} to erase all

characters or numbers.

Finding and calling a

phonebook entry

Scrolling through all entries

1{C}

2{V}/{^}: Select the desired entry.

3{C}

Key Character

{1}& ’ (),–./1

{2}a b c ABC2

{3}defDEF3

{4}ghiGHI4

{5}jklJKL5

{6}mn oMNO6

{7}pqrsPQRS7

{8}tuvTUV8

{9}w x yzWXYZ9

{0}Space 0

{*} ;

{#} #

TG743x(e).book Page 16 Monday, December 8, 2008 1:36 PM

Shared Phonebook

17

For assistance, please visit http://www.panasonic.com/help

Searching by first character

(alphabetically)

1{C}

2Press the dial key ({0} – {9}, {*},

or {#}) which contains the

character you are searching for

(page 16).

LPress the same dial key

repeatedly to display the first

entry corresponding to each

character located on that dial key.

LIf there is no entry corresponding

to the character you selected, the

next entry is displayed.

3{V}/{^}: Scroll through the

phonebook if necessary.

4{C}

Editing entries

1Find the desired entry (page 16).

i {EDIT}

2{V}/{^}: Select the information you

want to edit.

■To change the name or phone

number:

{V}/{^}: Select the name or

phone number. i {SELECT}

i Edit the information (page

16). i {OK}

■To change the ringer ID:

{V}/{^}: Select the current ringer

ID. i {SELECT} i Select the

desired setting. i {OK}

LTo turn the ringer ID off, select

“No Ringer ID”.

3{SAVE} i {OFF}

Erasing entries

1Find the desired entry (page 16).

2{ERASE}

3{V}/{^}: “Yes” i {SELECT} i

{OFF}

Chain dial

This feature allows you to dial phone

numbers in the phonebook while you are

on a call. This feature can be used, for

example, to dial a calling card access

number or bank account PIN that you

have stored in the phonebook, without

having to dial manually.

1During an outside call, press {C}.

2{V}/{^}: Select the desired entry.

3Press {CALL} to dial the number.

Note:

LWhen storing a calling card access

number and your PIN in the

phonebook as one phonebook entry,

press {PAUSE} to add pauses after

the number and PIN as necessary

(page 13).

LIf you have rotary/pulse service, you

need to press {*} (TONE) before

pressing {C} in step 1 to change the

dialing mode temporarily to tone.

TG743x(e).book Page 17 Monday, December 8, 2008 1:36 PM

Programming

18

For assistance, please visit http://www.panasonic.com/help

Programmable settings

You can customize the unit by programming the following features using the handset.

To access the features, there are 2 methods:

– scrolling through the display menus (page 18)

– using the direct commands (page 20)

LDirect command is the main method used in these operating instructions.

Programming by scrolling through the display menus

1{MENU} (center of joystick)

2Select the desired top-menu by pushing the joystick in any direction. i

{SELECT}

3Push the joystick down or up to select the desired item in sub-menu 1. i

{SELECT}

LIn some cases, you may need to select from sub-menu 2. i {SELECT}

4Push the joystick down or up to select the desired setting. i {SAVE}

LThis step may vary depending on the feature being programmed.

LTo exit the operation, press {OFF}.

Note:

LSee page 20 for the default settings.

Main menu Sub-menu 1 Sub-menu 2 Page

Caller list

W

––28

Answering device

s

Message list –32

Play new msg. –32

Play all msg. –32

Erase all msg.*1 –33

Greeting Record greeting*1 31

Check greeting 31

Pre-recorded*1 31

Settings Ring count*1 34

Recording time*1 35

Remote code*1 33

Answer on*1 –30

Answer off*1 –30

V.M. access

#

––37

TG743x(e).book Page 18 Monday, December 8, 2008 1:36 PM

Programming

19

For assistance, please visit http://www.panasonic.com/help

*1 If you program these settings using one of the handsets, you do not need to

program the same item using another handset.

Intercom

x

––38

Initial setting

"

Ringer setting Ringer volume –

Ringer tone –

Silent mode

–On / Off

–Start / End

23

Set date / time Date and time*1 12

Alarm 23

Time adjust*1 –

Talking CallerID Handset 27

Base unit*1

Voice Mail Store V.M. no.*1 36

VM tone detect*1 36

Call block*1 –24

Message alert –35

Display setting Display mode 25

LCD contrast –

Key tone ––

Auto talk –13

Caller ID edit*1 –28

Set tel line Set dial mode*1 12

Set flash time*1 14

Set line mode*1 –

Registration Register handset 26

Deregistration 26

Change language Display 12

Voice prompt*1 12

Customer support

!

–––

Main menu Sub-menu 1 Sub-menu 2 Page

TG743x(e).book Page 19 Monday, December 8, 2008 1:36 PM

Programming

20

For assistance, please visit http://www.panasonic.com/help

Programming using the direct commands

1{MENU} (center of joystick) i {#}

2Enter the desired feature code.

3Enter the desired setting code. i {SAVE}

LThis step may vary depending on the feature being programmed.

LTo exit the operation, press {OFF}.

Note:

LIn the following table, < > indicates the default settings.

Feature Feature

code

Setting code System

setting*1

Page

Alarm {7}{2}{0}{1}: Once {2}: Daily

{0}: <Off>

–23

Answer off {3}{2}{8}–r30

Answer on {3}{2}{7}–r30

Auto talk*2 {2}{0}{0}{1}: On {0}: <Off>–13

Block w/o num.

(Block calls without

phone number)

{2}{4}{0}{1}: On {0}: <Off>r25

Call block {2}{1}{7}–r24

Caller ID edit

(Caller ID number

auto edit)

{2}{1}{4}{1}: <On> {0}: Off r28

Caller list {2}{1}{3}––28

Check greeting {3}{0}{3}––31

Customer

support*3

{6}{8}{0}–––

Date and time {1}{0}{1}–r12

Deregistration {1}{3}{1}––26

Display

(Change language)

{1}{1}{0}{1}: <English>

{2}: Español

–12

Display mode {1}{9}{2}{1}: <Multi items>

{0}: Single item

–25

Erase all msg.

(msg.: messages)

{3}{2}{5}–r33

Intercom {2}{7}{4}––38

Key tone*4 {1}{6}{5}{1}: <On> {0}: Off ––

LCD contrast

(Display contrast)

{1}{4}{5}{1}–{6}: Level 1–6 <3> – –

Message alert {3}{4}{0}{1}: <On> {0}: Off –35

TG743x(e).book Page 20 Monday, December 8, 2008 1:36 PM

Page is loading ...

Panasonic KX-TG7432, KX-TG7433, KX-TG7433B, KX-TG7434 User manual

Related papers