ANKO 43259267 Multi Coloured LED Light Strip User manual

Hello! I've reviewed the user manual for the anko LED Light Strip 43259267. This document provides important safety instructions, details about the various lighting modes, color selection, remote control functionality and power options for the device. I am ready to answer your questions about the LED Light Strip and its features.
What type of batteries does the remote control use?

Can the light source be replaced?

Can the LED strip be used outdoors?

What should I do if the luminaire stops working?

1.Before connecng the DC plug to the luminaire, make sure LED

Driver (AC Adaptor) is plug oﬀ from mains and determine whether

the voltage and current rang match the input of the luminaire.

2.The power cord must be placed in an environment that will not be

trampled or squeezed.

3.To avoid overheang, install the LED driver (AC adaptor) in a well-

venlated environment. If the adjacent luminaire primary heat

source, it must be 10 cm minimum from the luminaire.

4.If the luminaire is not in use for a long me, remove the LED driver

(AC Adaptor) to prevent the luminaire from be in damaged by

inducve lightning strike or voltage surge.

5.See below for installaon in recessed mounted.

The LED Driver (AC adaptor) is classiﬁed as “Do-not-cover”. See note

and diagram as below.

(a)The minimum clearance distance from the top and sides of the

LED driver (AC Adaptor) to normal ﬂammable building elements is

100mm.

(b)The LED driver (AC Adaptor) is not required to be mounted on a

speciﬁc surface and has no addional installaon requirements.

Diagram shows the mounng requirement

CFor indoor use only.

User Manual and installaon

for the LED Driver

(AC Adaptor):