Gaming Audio Series™ SP2500
High-Power 2.1 PC Speaker System
SP2500 Product SKU sheet
2 | Page
December 7, 2010
© 2010 Corsair Memory, Inc. All Rights Reserved. Corsair and the sails logo are registered trademarks in the United States and/or other
countries. Design and specifications subject to change without notice.
46221 Landing Parkway, Fremont, CA 94538
Toll-free +888.222.4246
corsair.com
Specifications
Specifications:
• Frequency response of 35Hz – 20kHz +- 3dB
• 232 Watts of total power (measured via FTC “RMS” method)
Subwoofer:
• 18.1” x 10.2” x 11.7” (46 x 25.8 x 29.7cm) enclosure with fourth-order bandpass design for accurate bass
reproduction
• 8” subwoofer driver with durable rubber surround
• Bridged dual 60 Watt class-D amplifiers with integrated DSP for 120W of power (measured via FTC “RMS” method)
• Ultra-efficient integral power supply with 100V – 240V AC input
Satellites:
• Bi-amplified, two-way design with detachable audio cables
• 3” midrange drivers
• 1” custom-designed, ferrofluid-cooled silk dome tweeters
• 4.25” x 4.7” x 6.25” (10.8 x 12 x 15.9cm) enclosures with asymmetrical tweeter placement for superior stereo
imaging
I/O, Controls, and Programming:
• PC input on subwoofer
• Dual 3.5mm auxiliary inputs (one on subwoofer, one on desktop controller)
• 3.5mm headphone out with digital signal processing
• Wired desktop controller with 1.8” (4.6cm) color display and multi-lingual interface
• Digital signal processor with active crossover capability
• Mod X™ theatrical audio processing for Blu-Ray and DVD audio that recreates the theatre experience
• Dynamic DSP programs and EQ curves for late night listening, environment simulation, and optimal enjoyment of
games, movies, and music
Package Contents:
• x1 subwoofer
• x2 satellites
• x1 desktop controller with 6’ (1.8M) cable
• 3.5mm to stereo RCA cable for PC input
• 6’ (1.8m) satellite cables with ATX connectors
• Power cable
• User Guide
System Requirements:
• Any PC or audio device with 3.5mm line-level output (devices with dual-RCA or other audio output may be used with
an adapter cable, not included)
• Firmware updates require an Internet connection and a PC running Windows 7, Vista, or XP