Philips SHS3910/28 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Philips SHS3910/28 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Philips
Neckband Headphones
SHS3910
Balanced Sound
contoured neckband for good fit
Neckband headphone with dynamic bass sound.
Music to your ears
32mm speaker driver delivers high performance sound
Bass beat vents allow air movement for better sound
Neodymium magnets enhance bass performance and sensitivity
Made to fit you and your lifestyle
Ear cushions improve wearing comfort and bass response
Single-sided cable reduces tangling and improves comfort
Always ready to go
A 1.2m long cable that is ideal for outdoor use
Issue date 2014-02-12
Version: 2.0.2
12 NC: 8670 000 60982
UPC: 6 09585 18702 3
© 2014 Koninklijke Philips N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V.
or their respective owners.
www.philips.com
Specifications
SHS3910/28
Neckband Headphones
Highlights
1.2m cable
The ideal cable length to give you the freedom to put
your audio device where you want.
Sound
Acoustic system: open
Diaphragm: Mylar dome
Magnet type: Neodymium
Voice coil: copper
Frequency response: 12 - 22 000 Hz
•Impedance: 24 ohm
Maximum power input: 100 mW
Sensitivity: 102 dB
Speaker diameter: 32 mm
•Type: Dynamic
Packaging dimensions
Packaging dimensions (W x H x D):
7.7 x 7.7 x 2.4 inch
Nett weight: 0.104 lb
Gross weight: 0.287 lb
Tare weight: 0.183 lb
Number of products included: 1
Packaging type: Blister
UPC: 6 09585 18702 3
Outer Carton
•Outer carton (L x W x H): 8.0 x 7.6 x 8.7 inch
Nett weight: 0.311 lb
Gross weight: 0.882 lb
Tare weight: 0.571 lb
GTIN: 1 06 09585 18702 0
Number of consumer packagings: 3
/