V7 WM1FT100 Datasheet

Brand: V7

Model: WM1FT100

Category: Flat panel wall mounts

Type: Datasheet

This manual is also suitable for

WM1FT100-1N

V7 WM1FT100-1N is a fixed and tilt mount designed for 23"– 42" flat panels. Its low 1.77” (45mm) mounting profile makes it ideal for ultra-thin flat panels. The mount can be tilted at 3°, 5° or 7° increments to reduce glare. It also features streamlined dual-function rails that can easily alternate between fixed and tilt positions. The single wall plate allows for quick installation and the small footprint provides ample room for power and A/V cutouts behind the panel. The Lift n’ Lock™ feature allows you to easily attach your flat panel to the mount.

V7 WM1FT100-1N is a fixed and tilt mount designed for 23"– 42" flat panels. Its low 1.77” (45mm) mounting profile makes it ideal for ultra-thin flat panels. The mount can be tilted at 3°, 5° or 7° increments to reduce glare. It also features streamlined dual-function rails that can easily alternate between fixed and tilt positions. The single wall plate allows for quick installation and the small footprint provides ample room for power and A/V cutouts behind the panel. The Lift n’ Lock™ feature allows you to easily attach your flat panel to the mount.

V7 – ACCESSORIES

LOW-PROFILE MOUNT

Fixed and tilt mount fits 23”– 42” flat panels

Engineered and packaged with minimal materials, the WM1FT100 is

ideal for eco-conscious installers looking for an easy-to-install, small tilt

flat-panel mount for LED and thin models. Compatible with most large

flat panels, its reduced footprint allows ample room for power/AV cords,

delivering a sleek and clean appearance.

The data in this publication is for illustration purposes only and does not necessarily represent standards or specifications which

must be met by V7. Design and specifications are subject to change without prior notice. Trademarks belong to their respective

owners. No responsibility assumed and all liability for damages resulting from use of this information or for any errors or omissions,

are disclaimed. Measurement standards and testing conditions, as per manufacturer definitions, are available on request.

[04/08/11]

www.V7-world.com

For a complete list of V7 Products,

please visit www.ingrammicro.com/V7

or contact your Ingram Micro Sales

Representative at 800-456-8000.

Specifications:

V7 Model #:

WM1FT100

Displays:

Fits most 23” – 42” flat panel monitors

Weight:

Supports up to 100 lbs (45.4 kg)

Tilt:

+7°

Mounting:

Mounting Profile 1.77” (45 mm)

Double-stud

Mounting Pattern:

VESA compliant: 100x200 to 400x600

Color:

Black

Warranty:

5 years

Country of Origin:

China

.

Product Benefits:

 Low 1.77” (45mm) mounting profile ideal for ultra thin flat panels

 Tilt at 3°, 5° or 7° increments to reduce glare

 Streamlined dual-function rails can easily alternate between fixed

and tilt positions

 Single wall plate allows for quick installation

 Small footprint provides ample room for power and A/V cutouts

behind panel

 Lift n’ Lock™ allows you to easily attach your flat panel to the

mount

 Sliding lateral on-wall adjustment

 Locking system secures panel to mount

 Eco-friendly product design and packaging

 Simple to install and use

 Includes complete hardware kit

1

V7 WM1FT100 Datasheet

Brand: V7

Model: WM1FT100

Category: Flat panel wall mounts

Type: Datasheet

This manual is also suitable for

WM1FT100-1N

V7 WM1FT100-1N is a fixed and tilt mount designed for 23"– 42" flat panels. Its low 1.77” (45mm) mounting profile makes it ideal for ultra-thin flat panels. The mount can be tilted at 3°, 5° or 7° increments to reduce glare. It also features streamlined dual-function rails that can easily alternate between fixed and tilt positions. The single wall plate allows for quick installation and the small footprint provides ample room for power and A/V cutouts behind the panel. The Lift n’ Lock™ feature allows you to easily attach your flat panel to the mount.

Related papers

V7 WM1FT150 Datasheet

Other documents