IDE 44 Pin to Dual Compact Flash SSD Adapter
StarTech ID: IDE442CF
This adapter features one IDE 44-pin male connector and two Compact Flash ports, allowing you to connect two Compact
Flash (CF) type media cards to a laptop computer in place of a 2.5in IDE hard drive.
A true Do-it-yourself SSD solution, the CF to IDE adapter allows Compact Flash, Compact Flash 2, or MicroDrive media to
be used as a bootable hard drive on a notebook computer and requires no software or driver installation.
Applications and Solutions
• Ideal for system builders and testers requiring a convenient way to swap drives and operating systems
• Use two Compact Flash cards as one bootable 2.5 inch IDE hard drive
Features
• All-in-one onboard solution takes care of conversion. No software/drivers or cables required
• Compatible with CFI/II, MicroDrive™
• Convert your CF for use as a SSD (solid state drive)
• On-board LED to show drive status
• Reading-performance, anti-shock ability and tolerance of the the temperature difference are better than traditional hard
drives
• Use your Compact Flash cards to act as the primary bootable device
• With no moving parts, provides a silent operation that is resilient to environmental factors while reducing overall power
consumption
Technical Specifications
• Warranty: Lifetime warranty
• Connectors: 2 x Compact Flash Slots
• 1 x IDE 44 pin (2.5 inch drive connector)
• Cards Supported: Compact Flash Type I, and II, and MicroDrive
• NOTE: Hot swapping not supported
• Carton Quantity: 40
• Shipping (Package) Weight: 0.31 lb [0.14 kg]
• Product Weight: 0.71 oz [20 g]
/
