•
•
8 voice channels for media crossing
Codecs: G.711, G.723, G.726, G.729
8 DSP extension for modular elmeg ICT systems
elmeg Module 8 DSP
elmeg Module 8 DSP
25.10.2013
Subject to technical alterations
Page 2 / 2
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [email protected] - www.teldat.org
8 DSP extension for modular elmeg ICT systems
Module M 8 DSP provides 8 DSP channels for modular elmeg ICT systems (ICT, hybird 300 / 600)
and ensures the media transfer to IP telephones or to SIP providers.
Product description
To provide optimum voice quality with
minimum bandwidths, the standard voice
codecs G.711, G.723.1, G.726, and G.729a/b
are supported.
In elmeg ICT systems
With the combination of elmeg ICT PBX,
VoIP-VPN Gateway, and up to two extension
modules M 8 DSP is the ICT system converted
to a complete switched network-to-IP gateway.
This permits the transition of IP voice data into
the traditional voice network and vice versa.
In elmeg hybird 300 / 600 systems
With respect to media transfer, i.e. the
connection from "traditional" technology to IP
telephones or to SIP providers, the elmeg
hybird 300 / 600 can be upgraded if required
by a further 2 powerful DSP modules (special
module slots) that provide parallel usable
media transfers.
Variants
M 8 DSP (1092316) Module with 8 digital, highly compressed voice channels, speech compression
(Codecs) as per G.711, G.723.1, G.726, G.729a/b
elmeg Module 8 DSP
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Bintec-elmeg 1092316 Datasheet
-
Funkwerk 5510000184 Datasheet
-
-
-
-
-
-
Bintec Elmeg elmeg hybird 300 Installation guide
-
-
