Highpoint SSD7120 User guide

Type
User guide

This manual is also suitable for

Page 5/8/2018
1
Checking the PCIe Bandwith of your HighPoint NVMe Controller
using HighPoint Command Line Interface (CLI)
1. Go to Terminal
2. Type hptraidconf to enter the CLI
3. Type query enclosures. Make sure that the Link Width is x16 and Link Speed is Gen 3 for maximum
performance.
  • Page 1 1

Highpoint SSD7120 User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI