Page 5/8/2018
1
Checking the PCIe Bandwith of your HighPoint NVMe Controller
using HighPoint Command Line Interface (CLI)
1. Go to Terminal
2. Type hptraidconf to enter the CLI
3. Type query enclosures. Make sure that the Link Width is x16 and Link Speed is Gen 3 for maximum
performance.
-
1
Highpoint SSD7103 User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Highpoint SSD7120 User guide
-
Highpoint SSD7202 User guide
-
Highpoint SSD7101A-1 User guide
-
Highpoint SSD7540 User guide
-
-
Highpoint RocketRAID 4520SGL User manual
-
Highpoint RocketStor 6422AS User manual
-
-
Highpoint RocketRAID 2744 User guide
-