Argos Home Ronda 4 Seater Metal Sofa Set User manual

Type
User manual

This manual is also suitable for

Argos Home Ronda 4 Seater Metal Sofa Set

This elegant and stylish sofa set is perfect for any home. With its sleek metal frame and comfortable cushions, it is both stylish and practical. The set includes a sofa, two armchairs, and a coffee table, providing ample seating for your family and friends.

The sofa is made from a durable metal frame and features comfortable cushions filled with foam. The cushions are removable, making them easy to clean. The armchairs are also made from a metal frame and feature comfortable cushions filled with foam. The coffee table is made from a metal frame and features a tempered glass top.

Argos Home Ronda 4 Seater Metal Sofa Set

This elegant and stylish sofa set is perfect for any home. With its sleek metal frame and comfortable cushions, it is both stylish and practical. The set includes a sofa, two armchairs, and a coffee table, providing ample seating for your family and friends.

The sofa is made from a durable metal frame and features comfortable cushions filled with foam. The cushions are removable, making them easy to clean. The armchairs are also made from a metal frame and feature comfortable cushions filled with foam. The coffee table is made from a metal frame and features a tempered glass top.

Issue 1 - 24/10/17
Assembly Instructions - Please keep for future reference
Width -114cm
Depth -71cm
Height -76cm
Dimensions
RONDA CONVERSATIONAL SET
7592573
Important - Read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456400800
For further assistance please visit http://www.argos-support.co.uk/
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
1
Care and maintenance
!
Check you have all the
components and tools listed on
page 2 & 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Make sure you have enough
space to layout the parts before
starting.
Do not stand or put weight on
the components during assembly,
this could cause damage.
Assembly on a soft level surface
to avoid damaging the unit or your
floor.
Parts of the assembly will be
easier with 2 people.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Dispose of all packaging carefully
and responsibly.
Do not stand on this lounge.
Warning: The unit weighs
approximately 9.6 kgs. Please lift
with care.
Wash frame parts with mild
soap and water, rinse thoroughly,
and dry completely. Do not use
bleach, acid, or other solvents
on the frame parts.
We recommend the use of
furniture covers when not in use.
Inspect and tighten all bolts
and fasteners on a regular basis
to ensure the proper performance
and safety of your ottoman.
In order to prolong the life and
beauty of your ottoman, we
recommend that it be stored in a
dry and protected area when not
in use .
Note: The quantities below are the correct amount to complete the assembly.
10mm Hex Key
Ruler - Use this ruler to help correctly identify the screws
Tools required
Components - Fittings
Please check you have all the fittings listed below
2
4mm Hex Key
15
M6 x 70mm Bolt x 3 M6 x 35mm Bolt x 2 M6 x 15mm Bolt x 2
A
B C
D10 Spring Washer x 7
D
Seat Assembly x 1Back Assembly x 1
1
2
Right Arm x 1
3
Back Cushion x 2
5
Seat Cushion x 2
6
Left Arm x 1
4
Components - Parts
Please check you have all the parts listed below
3
4
Step 1
Assembly Instructions
Step 2
At the rear of the seat, fix the
seat assembly to the back
assembly 1 by using bolts
, spring washers .
Keep the bolts loose.
Place the back assembly
onto a non-abrasive surface,
such as a carpet. Insert the seat
assembly into the back
assembly 1 .
2
1
A
D
A
D
1
2
1
1
2
2
1
2
1
Note:
The labels marked “L” and “R”
on arms ( and ) should
coincide with Step 3 to ensure
proper assembly.
Fix the arms ( and ) to
the back assembly by using
bolts , spring washers .
Make sure that all of the bolts
have been tightened
completely.
Step 3
Assembly Instructions
Step 4
At the front of the seat, fix the
arms ( and ) to the seat
assembly by using bolts ,
spring washers .
Keep the bolts loose.
D
C
4
2
3
C
D
5
3 4
3 4
2
3
4
1
B
D
3
1
B
D
4
L
R
Place the cushions and
onto the chair. Secure the
cushion to the chair by using
the velcro straps.
Step 5
Assembly Instructions
5
6
Assembly is completed.
If you need help or have damaged or missing parts, call the Customer Helpline: 03456400800
For further assistance please visit http://www.argos-support.co.uk/
Retailer: Argos
Address: 489-499 Avebury Boulevard Saxon Gate West, Central Milton Keynes Bucks, MK9, 2NW
5
5
6
6
6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Argos Home Ronda 4 Seater Metal Sofa Set User manual

Type
User manual
This manual is also suitable for

Argos Home Ronda 4 Seater Metal Sofa Set

This elegant and stylish sofa set is perfect for any home. With its sleek metal frame and comfortable cushions, it is both stylish and practical. The set includes a sofa, two armchairs, and a coffee table, providing ample seating for your family and friends.

The sofa is made from a durable metal frame and features comfortable cushions filled with foam. The cushions are removable, making them easy to clean. The armchairs are also made from a metal frame and feature comfortable cushions filled with foam. The coffee table is made from a metal frame and features a tempered glass top.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI