AWZ611
v1.0
MP4
Relay module
Edition: 2 from 01.03.2018
Supersedes edition: 1 from 17.11.2015
1. Technical description.
The MP4 (AWZ611) relay module is to be used in low-voltage installations. It is intended for controlling and
status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption
via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the
outputs of the module. It is equipped T- inputs used to trip relays low condition.
2. Module description.
2.1 Description of components and connectors of the
PSU.
3. Specifications
Element
no. [fig. 1]
Description
[1]
T– input of voltage controlling relay activity
[2]
+IN- module’s power input
[3]
Relay contacts:
COM – common relay clamp
NO - normaly open relay clamp
NC - normaly closed relay clamp
[4]
LED optical indication:
L1 (red) ON: COM contacts, closed NO,
OFF: COM contacts, closed NC
Voltage of the relay’s
coil
12V (10V DC÷14V DC)
Power consumption
180 mA max.
Number of relays
4
Voltage of the relay’s
contacts
30V DC / 50V AC max.
Tripping voltage T
T+ 5V÷ Unom.
T- 0V ÷ (Unom. - 5V)
Current of the relay’s
contacts
2A max.
Operating conditions
II environmental class -10°C÷ 50°C
Dimensions
L=120, W=43, H=22 [mm, +/-2]
Net/gross weight
0,08 / 0,11 [kg]
Installation
Installation tape or installation bolt x 2
Declarations,
warranty
CE, 2 year from the production date
Notes
leads on connections: Ø 0,41÷1,63
(AWG 26-14), 0,2÷1mm
2
Fig.1. Drawing of the module.
Fig.2. Electrical diagram.
EN**
WEEE MARKING
According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste and to collect such
WEEE separately.
Pulsar
Siedlec 150, 32-744 Łapczyca, Polska
Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50
e-mail: biuro@pulsar.pl, sales@pulsar.pl
http:// www.pulsar.pl, www.zasilacze.pl
/