LG PTVSAA0 User manual

[Representative] LG Electronics Inc. EU Representative :

LG Electronics European Shared Service Center B.V.

Krijgsman 1, 1186 DM Amstelveen, The Netherlands

[Manufacturer] LG Electronics Inc. Changwon 2nd factory 84, Wanam-ro,

Seongsan-gu, Changwon-si, Gyeongsangnam-do, KOREA

www.lg.com

MFL69847202

Rev.02_030520

ENGLISH ITALIANO ESPAÑOL FRANÇAIS

DEUTSCH

ΕΛΛΗΝΙΚΆ

ČEŠTINA

NEDERLANDS

POLSKI

LIMBA ROMÂNĂ

2

Table of Contents

Safety Precautions ..............................3

Components of Human Detection

Sensor Kit ............................................3

Installation of Human Detection

Sensor Kit ............................................4

Functions of Human Detection

Sensor....................................................7

Using the Human Detection

Sensor Kit..............................................7

Maintenance ..........................................8

Open Source License ..........................8

Warning - Make sure that you turn off the main power before installation.

Caution - This kit can only be installed in designated products. If the kit is

not installed according to this manual, it may not be assembled

properly.

!

3

ENGLISH

Make sure that you read Safety Precautions before using the product.

The Safety Precautions section provides information on ensuring safety of users

and preventing property damages.

After reading this user manual, keep it at a place where it can be easily accessed.

Warning - If these instructions are not followed, serious injuries or even

death may occur.

Caution - If these instructions are not followed, injuries or property dam-

ages may occur.

!

안안안 안안 안안 안안Safety Precautions

Components of Human Detection Sensor Kit

▶Since the installation work requires specialized techniques, it must only be carried out by the

service center or the installation center approved by LG Electronics. (If installation is carried out

by a person without an installation license, the person is responsible for all problems related to

the installation, and, in such cases, LG Electronics shall provide no free maintenance or repair

service.)

▶After completing the installation, be sure to show the customer that the product functions nor-

mally and has no problem.

▶Before installation, make sure that you read the installation manual.

Note

Human Detection

Sensor Kit

Wired Remote

Control

(separately sold)

Refer to the product manual

for using the remote control

connected to the product.

User Manual

4

Front of the Front Panel

Installation of Human Detection Sensor Kit

▶Make sure that you install the Human Detection Sensor kit before installing the front panel.

- If the front panel has already been installed, you cannot install the Human Detection Sensor

kit. In such a case, separate the front panel, install the kit, and re-install the front panel.

- You can operate the kit using remote controls described in the Components of Human Detec-

tion Sensor Kit section (page 3).

- A protective film is attached on the exterior of the Human Detection Sensor kit. Make sure that

you remove the protective film after installation is completed.

Caution

!

1. Check the mounting direction of the Human Detection Sensor kit.

(Install it on the right corner of the front panel when seen from the display PCB.)

There is no available installation location other than this, and installing the product in

another location may cause product malfunction or damage.

1-1. Determine the installation direction of the sensor kit based on the conditions of the site

where the air conditioner is to be installed.

- When the horizontal width is longer: General installation

- When the vertical width is longer: 90-degree rotated installation

(Installation Examples)

The horizontal width is longer than the

vertical width.

The vertical width is longer than

the horizontal width.

Display PCB Human Detection

Sensor Kit

Front of the Front Panel

Front of the

Front Panel

90-degree

Rotated Installation

General

Installation

Installation Space

5

ENGLISH

When installing the sensor kit, make sure that the insulating material is not torn or fall off while de-

taching or attaching the motor cover. (If the finish of the insulating material is defective, air may

leak out.)

Caution

!

1-3. After installing the Human Detection Sensor kit, set the installation direction of the kit

(general, 90-degree rotated). Refer to the remote control manual for details on how to set

the installation direction.

2. Attach the kit to the panel.

2-1. Detach the corner cover at the installation location of the kit.

2-2. To mount the kit, insert the connecting wire into the space that appears when the

corner cover is detached.

2-3. Detach the motor cover by loosening two screws.

2-4. Organize the connecting wire as shown in the figure, and attach the motor cover.

(Secure a margin of approximately 6 - 10 cm for the connecting wire to make it

easy to detach the Human Detection Sensor kit.)

2-5. Align the connecting wire to the wire guide and fix it with the hooks.

Figure. 2-1 Figure. 2-3Figure. 2-2

Figure. 2-4

Figure. 2-5

Figure. 90-degree Rotated Installation

Remove Screws

Rotate PCB

Assembly

Tighten Screws

Fix with Hooks

1-2. The default factory setting is for general installation, and you can rotate the PCB 90 de-

grees depending on the site conditions.

6

3. Use the front panel fixing bolts to fasten the panel and the main body together.

- Refer to the user manual for the 4-Way front panel.

- After fixing the panel, remove the protective film from the exterior of the Human De-

tection Sensor kit.

4. Detach the inlet grille from the panel and open the control

box cover of the main body

5. Refer to the wiring diagram attached to the control box

to connect all the connecting wires on the panel to the

connector inside PCB.

5-1. Connect the connecting wires of the kit to the yel-

low connector (CN_BLDC2) on the PCB as shown

in the figure.

6. Fasten the control box cover and attach the air Inlet grille.

7.

After completing the installation, check for normal operation by performing the following steps:

7-1. Set the installation direction of the sensor kit in the Installer Settings of the remote

control.

7-2.

After starting the operation, select 'Body Sensing Operation' in the 'Function Settings'.

7-3. Set ‘Body Sensing Wind Direction’ to ‘Direct Wind’ or ‘Indirect Wind’

7-4. Set to ‘Direct Wind’ and check if the vane that is in the direction of the motion de-

tected opens. Or set to ‘Indirect Wind’ and check if the vane that is in the direction

of the motion detected closes.

Figure. 5-1

Figure. 2-7

Fix with Hooks

2-7. Place the connecting wire inside the guide and fix it with the hooks, then attach the

motor cover.

2-6. Detach the motor cover by loosening two screws.

Figure. 2-6

7

ENGLISH

• The Human Detection Sensor detects movement within the detection range.

• Detection Ranges

Installation height 2.7 m: 12 m X 6 m

Installation height 3.2 m: 15 m X 8 m

Power Saving Operation Using Human Detection Sensor

• On/Off Power Saving: When no movement is detected, the operation is turned off to

save power.

• Temperature Power Saving: When no movement is detected, a power saving mode is

activated to reach the desired temperature.

h The time for detecting the absence of a person can be set to 5, 10, 15, 30, 60 or 90

minutes.

h The effect of the Power Saving operation may differ depending on the model, capacity,

or surrounding environment.

Human Detection Wind Direction

• Direct Wind: When a movement is detected, the wind is automatically controlled to

reach the location of the movement.

• Indirect Wind: When a movement is detected, the wind is automatically controlled not to

reach the location of the movement.

Precautions

• Do not conceal the sensor or touch it with a hand.

• When the sensor has dirt or other foreign substance, wipe it with a soft cloth. (There is a

risk of product malfunction if water enters the product. Do not immerse the product

under water. Make sure that you wipe it with a dry cloth.)

• The Human Detection Sensor detects the presence of human body based on move-

ment.

• When there is no movement, the sensor regards that there is no human body around.

• When an object moves away from the sensor, the sensor detects a big movement and

regards it as a human movement.

• When there are many moving objects, the wind direction adjustment function may be

delayed.

• Setting the detection result transmission period (5 seconds, 30 seconds (Default), 1

minute, 3 minutes) to 30 seconds (Default) or longer is recommended. When setting it to

5 seconds, the probability of false detection can be increased as it judges by motion.

• A change in indoor lighting conditions or sunlight shining through a window could be de-

tected as body movement.

• If you stop operation using a remote control while the On/Off Power Saving mode is on,

the product remains in a stopped state even when movement is detected.

• If movement is detected while On/Off Power Saving mode is on, even though no one is

in the room, the air conditioner may not turn off.

• The turning-off of the air conditioner may be delayed depending on the indoor conditions

while On/Off Power Saving is on.

Functions of Human Detection Sensor

Using the Human Detection Sensor Kit

8

• If the product does not operate even after all necessary settings are completed, please

contact the installer or the service center.

Please contact the service center if you wish to replace the front panel or receive a

service.

To obtain a source code developed for this product under the GPL, LGPL, MPL or other

open source license, please visit http://opensource.lge.com.

You can download the source code, content of all relevant licenses, copyright notice, and

a mark indicating that we bear no responsibility for the code.

If you request an open source code of the software installed in this product by sending an

e-mail to [email protected] within 3 years after the purchase of the product, the code

will be provided in a CD-ROM with a minimum fee necessary for the medium, transporta-

tion, etc.

Maintenance

Open Source License

Those products identified by the Product Type and Model Range above from LG Electron-

ics, Inc. ("LGE") contain the open source software detailed below. Please refer to the indi-

cated open source licenses (as are included following this notice) for the terms and

conditions of their use.

LGE Open Source Software Notice

Product Type Air-conditioner

Model Name/Range Camera Module for Air conditioner

• The Human Detection Sensor does not store any videos, so it does not violate the pri-

vacy of the user. LG Electronics is not responsible for any consequences that may arise

from the use of the product for purposes other than those intended.

• When the sensor is broken, the Direct Wind, Indirect Wind, On/Off Power Saving, and

Temperature Power Saving functions are automatically disabled.

9

This product from LG Electronics, Inc. ("LGE") contains the open source software detailed

below. Please refer to the indicated open source licenses (as are included following this

notice) for the terms and conditions of their use.

Open Source License Copyright

apmd 3.2.2-15 GPL-2.0

<[email protected]>

bash 3.2.48 GPL-2.0

Foundation, Inc.

coreutils 6.9 GPL-2.0

cpufrequtils 008 GPL-2.0

<[email protected]>, Novell Inc.

[email protected]>

Software.

e2fsprogs 1.42.9 GPL-2.0

2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,

2009, 2010 by Theodore Ts'o

glibc 2.23 LGPL-2.1

Inc.

Imx-kobs 5.5 GPL-2.0

man.me.uk>, Worcester, UK.

kmod 22 LGPL-2.1

libsysfs 2.1.0 LGPL-2.1

10

libusb 1.0.20 LGPL-2.1

Linux Kernel 4.1.15 GPL-2.0

lrzsz 0.12.20 GPL-2.0

memtester 4.3.0 GPL-2.0

memtester@pyropus.ca>

mtd-utils 1.5.2 GPL-2.0

procps 3.3.11

GPL-2.0

LGPL-2.1

sysfsutils 2.1.0

GPL-2.0

LGPL-2.1

Copyright (c) Ananth Mavinakayanahalli

Copyright (c) Daniel Stekloff

Copyright (c) Mohan Kumar

Copyright (c) Nitin Vashisth

Copyright (c) Ananth Mavinakayanahalli

Copyright (c) Daniel Stekloff

Copyright (c) Mohan Kumar

Copyright (c) Nitin Vashisth

sysstat 11.2.0 GPL-2.0

stat <at> orange.fr)

U-Boot 2016.03 GPL-2.0

Software Engineering

udev 3.1.5 GPL-2.0

ettering.net>

<[email protected]om>

usbutils 008 GPL-2.0

Copyright (c) Thomas Sailer, <[email protected]>

Johannes Erdfelt

David Brownell

Aurelien Jarno

11

Util-Linux 2.27.1 GPL-2.0

Inc.

<[email protected]om>

v4l-utils 1.6.2

GPL-2.0

LGPL-2.1

Inc.,

The source code for the above may be obtained free of charge from LGE at http://open-

source.lge.com. LGE will also provide open source code to you on CD-ROM for a charge

covering the cost of performing such distribution (such as the cost of media, shipping, and

handling) upon email request to opensourc[email protected]. This offer is valid for a period of

three years after our last shipment of this product. This offer is valid to anyone in receipt

of this information.

Please be informed that LG Electronics, Inc. products may contain open source software

listed in the tables below.

Open Source License Copyright

file 5.25

BSD-like Li-

cense (file)

1990, 1991, 1992, 1994, 1995.

Software written by Ian F. Darwin and others;

maintained 1994- Christos Zoulas.

libjpeg-turbo 1.4.2

BSD-3-Clause

IJG

<[email protected]> for Cendio AB

mander.

fornia.

12

libpng 1.6.21 Libpng

Randers-Pehrson

ncurses 6.0

MIT-like

License

(ncurses)

Foundation, Inc.

OpenCV 2.4.11 BSD-3-Clause

python 2.7.11 Python-2.0

tiff 4.0.6 libtiff

zlib 1.2.8 Zlib

Mark Adler

This software is based in part on the work of the Independent JPEG Group

License URLs

• BSD-3-Clause : http://opensource.lge.com/license/BSD-3-Clause.html

• BSD-like License (file) : http://opensource.lge.com/license/BSD-like_License_(file).html

• GPL-2.0 : http://opensource.lge.com/license/GPL-2.0.html

• IJG : http://opensource.lge.com/license/IJG.html

• LGPL-2.1 : http://opensource.lge.com/license/LGPL-2.1.html

• Libpng : http://opensource.lge.com/license/Libpng.html

• MIT-like License (ncurses) :

http://opensource.lge.com/license/MIT-like_License_(ncurses).html

• Python-2.0 : http://opensource.lge.com/license/Python-2.0.html

• Zlib : http://opensource.lge.com/license/Zlib.html

• libtiff : http://opensource.lge.com/license/libtiff.html

LG PTVSAA0 User manual

This manual is also suitable for

LG PTVSAA0 User manual

Related papers

Other documents