Model
JC-0495
JC-0895
JC-1395
2110 South 26th Street
PO Box 1720
Manitowoc, WI 54221-1720 USA
Tel: 1.920.682.0161
Fax: 1.920.683.7589
www.manitowocice.com
Vertical Discharge Remote Condenser
For S-Series Ice Cube Machines
Vertical Discharge Remote Condenser
For S-Series Ice Cube Machines
JC-0895
Remote Condenser
Standard Features
• Vertical discharge remote condenser is available
for S-Series 500, 600, 850, 1000, 1400 and 1800
ice machines. Refer to ice machine specification
sheet for equipment dimensions, production
capacities, electrical requirements, and ice storage
bin compatibility.
• Condenser operation range from -20°F (-29°C) to
120°F (49°C). Can be installed with up to 20" (50.8
cm) of bottom clearance.
• Remote system consists of a remote condenser
and interconnecting refrigerant lines. All
components are pre-charged with environmentally
responsible refrigerant and have quick-connect
fittings for convenient installation. Order ice cube
machine, ice storage bin and line set separately.
Warranty
• 3-year parts and labor. See warranty statement for
complete details.
Remote, air-cooled condenser system
improves efficiency and ice production,
conserving energy.
Manitowoc remote condenser systems
effectively dissipate heat at a convenient
location, indoors or outdoors, away from
the ice machine. This maximizes ice-making
capability and minimizes air conditioning
loads by lowering the ambient air
temperature at the ice machine.
Single S-Series
Ice Machine
Remote
Condenser
S-500 JC-0495
S-600, 850 or 1000 JC-0895
S-1400 or 1800 JC-1395
Installation Information and Dimensions
Maximum Location Distance—combined vertical and horizontal
distances from ice machine to condenser must comply with guidelines.
Maximum Line Length: 100' (30 m)*
Maximum Vertical Rise: 35' (10.5 m) above ice machine.
Maximum Vertical Drop: 15' (4.5 m) below ice machine.
To calculate other acceptable horizontal and vertical combinations,
refer to remote condenser installation instructions.
* Remote condenser has refrigerant charge for up to 50' (15 m) line length.
Over 50' (15 m) requires additional refrigerant charge at time of installation.
3219D ©2010 Manitowoc 1/10 Continuing product improvement may necessitate change of specifications without notice.
Vertical Discharge Remote Condenser
For S-Series Ice Cube Machines
2110 South 26th Street
PO Box 1720
Manitowoc, WI 54221-1720 USA
Tel: 1.920.682.0161
Fax: 1.920.683.7589
www.manitowocice.com
Typical Installation
Optional
34.00"
(86.36 cm)
or
38.00"
(76.20 cm)
24.50" (62.23 cm)
28.00" (71.12 cm)
29.16" (74.06 cm)
Electrical
Entrance
Discharge
Refrig.
Line
Liquid
Refrig.
Line
A
B
C
E
F
D
6.00" (15.24 cm)
3.50" (8.89 cm)
3.88" (9.85 cm)
12.13" (30.81 cm)
1.50" (3.81 cm)
6.50" 16.51 cm)
Optional
20.00" (50.80 cm)
16.00" (40.64 cm)
G
G
E
F
C
D
A
B
JC-0495, JC-0895, Remote Condenser
Optional
38.00" (96.52 cm)
34.00" (86.36 cm)
29.50" (74.93 cm)
27.94" (70.96 cm)
Electrical
Entrance
Discharge
Refrig.
Line
Liquid
Refrig.
Line
29.16" 74.06 cm)
A
B
C
D
6.00" (15.24 cm)
3.50" (8.89 cm)
4.00" (10.16 cm)
14.62" (37.13 cm)
E
F
Optional
20.00" (50.80 cm)
16.00" (40.64 cm)
G
E
F
C
D
A
B
1.50" (3.81 cm)
6.50" (16.51 cm)
G
JC-1395 Remote Condenser
Electric
Electrical power to the remote condenser is intended to be
supplied from the ice machine; however, if necessary, a separate
electrical power source can be used.
Remote S-Series Ice Machine
S-Series Remote Condenser
Standard Interconnecting Refrigerant Lines
S-Model
Electrical
Service*
Minimum Circuit
Ampacity
Maximum
Fuse size
500 115/60/1 20 25
600 208-230/60/1 8.9 15
850 208-230/60/1 11.9 9.2 20 15
1000 208-230/60/1 15.7 10.6 25 15
1400 208-230/60/1 17.9 12.8 30 20
1800 208-230/60/1 23.1 13.0 40 20
* 230/50/1 available. Shaded box indicates 3 phase. Consult factory.
HACR circuit breakers can be used in place of fuses.
Condenser
S-Model
Matching
Ice Machine
Condenser
Electrical
Service*
Amperage
Weight
lbs. kgs.
JC-0495 500 115/60/1 2.3 76 34
JC-0895 600, 850, 1000 208-230/60/1 1.3 76 34
JC-1395 1400, 1800 208-230/60/1 1.3 96 44
* 230/50/1 available. Consult factory. HACR circuit breakers can be used in
place of fuses.
Model
Line Length Weight
ft. cm. lbs. kgs.
R(*)-20-R-404A 20 600 11 5 15
R(*)-35-R-404A 35 1,050 17 8 20
R(*)-50-R-404A 50 1,500 24 11 20
* RT prefix for Series 500, 600, 850, and 1000.
RL prefix for Series 1400 and 1800. Order separately.
-
1
-
2
Manitowoc JC-0495 Datasheet
- Category
- Ice cube makers
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI