TaoTronics SoundLiberty 92 User manual

Model: TT-BH092

TaoTronics SoundLiberty 92

True Wireless Stereo Earbuds

User Guide

03-13-2020

TT-BH092_V1.1

EUROPE

E-mail:

[email protected](UK)

[email protected](DE)

[email protected](FR)

[email protected](ES)

[email protected](IT)

NORTH AMERICA

E-mail: [email protected](US)

[email protected](CA)

Tel: 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)

Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.

Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China

Learn more about the EU Declaration of Conformity:

https://www.taotronics.com/pages/user-manual

MANUFACTURER

ASIA PACIFIC

E-mail: [email protected](JP)

JP Importer: SUNVALLEY JAPAN

Address: 104-0032 18-6PMOF

www.taotronics.com

MADE IN CHINA

CONTENTS

English

Deutsch

Français

Español

Italiano

01-11

12-24

25-37

38-51

52-63

64-75

Page is loading ...

PRODUCT DIAGRAM (Fig. 2)

2

Multifunction Touch Control

LED Indicator

Microphone

Charging Contacts

Reset Button

Charging Slot

Charging Indicator

Charging Case

USB-C Charging Port

EN

Multifunktions-Touch-Steuerung

LED-Anzeige

Mikrofon

Ladekontakte

Reset-Taste

Ladeschacht

Ladeanzeige

Ladehülle

USB-C-Ladeanschluss

DE

Multifonction Touche Tactile

Voyant à LED

Microphone

Contacts de Charge

Bouton Reset

Slot de Charge

Voyant de Charge

Boîtier de Charge

Port de Charge USB-C

FR

Control Táctil Multifunción

Indicador LED

Micrófono

Contactos de Carga

Botón de Reinicio

Ranura de Carga

Indicador de Carga

Estuche de Carga

Puerto de Carga USB-C

ES

Controllo Touch Multifunzione

Indicatore LED

Microfono

Charging Contacts

Pulsante di Reset

Slot per la Ricarica

Indicatore di Ricarica

Custodia per la Ricarica

Porta di Ricarica USB-C

IT

JP

1

3

2

9

8

7

4

Bottom

5

6

01 02

EN

IMPORTANT SAFETY INSTRUCTIONS

Please read the instructions thoroughly before using this product and retain it

for future reference.

Hearing Safety

• Do not wear earbuds with high volume for a long time to avoid damaging

your hearing.

• Set the earbuds to low volume before you put them on, then increase the

volume gradually as per your preference.

• Do not set volume too high to stay aware of your surroundings.

• Please refer to local laws and regulations if you want to answer phone calls

via this device during driving.

• For your safety, avoid distraction from music or phone calls when you are

driving or doing other activities with potential dangers.

Warning: Please set the volume to proper level to avoid hearing damages.

Caution

• Do not expose this product to high temperatures.

• Do not immerse the earbuds into water or expose them to humidity for a

long time.

• Do not clean the product with detergent containing alcohol, ammonia,

benzene or abrasives.

• Avoid dropping.

• Place the earbuds back into the charging case when not in use and keep it

away from children and pets to avoid choking hazard.

• Unauthorized disassembly of any parts of this product is forbidden, which

may cause ﬁre hazard, warranty voidance, and/or property loss.

• Close attention is needed when using near children.

• Keep the charging case away from water, rain or any other liquid.

• Don’t use the product in thunderstorm to avoid malfunction or electric

shock.

• Always ask a professional technician or authorized personnel for repair.

This product contains lithium battery. Never expose it to excessive heat

such as direct sunlight or ﬁre to avoid explosion.

WEAR YOUR EARBUDS

Please wear the earbuds as shown below (Fig. 3).

Pictures only for reference.

3

① ②

03 04

Bluetooth Caution

• When the device is connected wirelessly to another device, place the two

devices close to each other to achieve their normal functionalities and avoid

possible signal interference.

• The maximum effective Bluetooth range may vary with the environmental

circumstances.

• When using a wireless connection, make sure there are no obstacles

between the two devices. Obstacles including walls and fences may shorten

the effective range.

USING YOUR EARBUDS

Charging

Charging the Earbuds

1. Put the earbuds into the charging case as per the L (left) and R (right) marks

(Fig. 4).

2. Cover the lid and charging will start automatically (Fig. 5).

Note:

• Please fully charge the earbuds when using them for the ﬁrst time.

• When battery is low, a “Battery low” voice prompt will be heard (if you are wearing

the earbuds). Please charge it in time or the earbuds will turn off automatically

around 10 minutes later.

• Charge the earbuds at least once every 3 months when not using for a long time.

Charging the Charging Case

1. Connect the charging port with any USB charging adapter or active

computer USB port (Fig. 6).

2. The charging indicator will ﬂash and turn solid white once fully charged.

Note: • Unplug the charging cable (timely) when fully charged.

• Press the Reset Button to check the current battery status.

4 5

6

L R

05 06

Power On (Fig. 7)

Uncover the lid and they will power on automatically.

Power Off (Fig. 8)

Put the earbuds into the charging case and close the lid, they will turn off

automatically.

Pairing

• You can use one earbud or both earbuds as per your preference. Please

refer to the corresponding pairing instructions.

• Before pairing, please turn off other Bluetooth devices and place the device

to be connected close to the earbuds.

• When the earbuds are disconnected from your device for more than 10

minutes, they will turn off automatically.

Couple Earbuds Mode

1. Uncover the lid to turn on the earbuds, they will connect with each other

automatically. The LED indicators on both earbuds will ﬂash blue and white

alternately indicating the earbuds are in pairing mode now.

2. Turn on the Bluetooth function on your device and search for nearby

devices. Find “TAOTRONICS SoundLiberty 92” in the searching results, tap

on the name to connect.

3. Once connected, the LED indicators on both earbuds will ﬂash blue slowly.

Note:

• The earbuds can remember the devices paired previously, and will attempt

to pair with the last connected device. If re-pairing failed, the earbuds will

enter pairing mode.

• It is not recommended to wear the two earbuds on different people. If

necessary, please keep the two earbuds close to each other in couple

earbuds mode.

7

L

R

8

Single Earbud Mode

1. Take out one earbud from the charging case, and make sure the other one

is placed in the charging case and the lid is covered.

2. It will try to pair with the last paired device ﬁrst then enter pairing mode

with its LED indicator ﬂashing blue and white alternately if pairing failed.

3. Turn on the Bluetooth function on your device and search for nearby

devices. Find “TAOTRONICS SoundLiberty 92” in the searching results, tap

on the name to connect.

4. Once connected, the LED indicator will ﬂash blue slowly.

Note:

If you want to change to couple mode, simply take out the other earbud

from the charging case, they will pair with each other automatically.

Clear Pairing List

If you failed to pair your device with the earbuds, please clear the pairing

history as instructed below:

1. Put the earbuds back into the charging case, close the lid then open it.

2. Press and hold the Reset Button for 10 seconds until the LED indicators on

the earbuds and the charging case ﬂash white three times.

3. If you have paired your device with the earbuds before, remove

"TAOTRONICS SoundLiberty 92" from the Bluetooth device list and

pair again.

4. Re-pair with your Bluetooth® device as instructed in “Pairing” section.

Note:

If you want to pair the earbuds with another device when you have already

paired them with a device, deactivate the Bluetooth function on the paired

device or clear “TAOTRONICS SoundLiberty 92” from its Bluetooth list.

Restore the earbuds to factory settings as instructed above if pairing failed.

L R

07 08

Pairing

• You can use one earbud or both earbuds as per your preference. Please

refer to the corresponding pairing instructions.

• Before pairing, please turn off other Bluetooth devices and place the device

to be connected close to the earbuds.

• When the earbuds are disconnected from your device for more than 10

minutes, they will turn off automatically.

Couple Earbuds Mode

1. Uncover the lid to turn on the earbuds, they will connect with each other

automatically. The LED indicators on both earbuds will ﬂash blue and white

alternately indicating the earbuds are in pairing mode now.

2. Turn on the Bluetooth function on your device and search for nearby

devices. Find “TAOTRONICS SoundLiberty 92” in the searching results, tap

on the name to connect.

3. Once connected, the LED indicators on both earbuds will ﬂash blue slowly.

Note:

• The earbuds can remember the devices paired previously, and will attempt

to pair with the last connected device. If re-pairing failed, the earbuds will

enter pairing mode.

• It is not recommended to wear the two earbuds on different people. If

necessary, please keep the two earbuds close to each other in couple

earbuds mode.

OPERATION AND FUNCTIONS

Function

Play / Pause

Operation

Tap the Touch Control on either

of the earbuds twice under music

Tap the Touch Control on the

right earbud

Tap the Touch Control on the

left earbud

Tap the Touch Control on the

right earbud three times

Tap the Touch Control on

either of the earbuds once

Tap the Touch Control on the

left earbud three times

Tap and hold the Touch

Control on either of the

earbuds for 2 seconds

Tap and hold the Touch

Control on either of the

earbuds for 2 seconds

Volume +

Volume -

Next Track

Previous Track

Answer Phone

Call

Decline an

Incoming Call

Hang up

Phone Call

Voice Prompt

/

Toots when highest setting

is reached

/

Call rejected

Single Earbud Mode

1. Take out one earbud from the charging case, and make sure the other one

is placed in the charging case and the lid is covered.

2. It will try to pair with the last paired device ﬁrst then enter pairing mode

with its LED indicator ﬂashing blue and white alternately if pairing failed.

3. Turn on the Bluetooth function on your device and search for nearby

devices. Find “TAOTRONICS SoundLiberty 92” in the searching results, tap

on the name to connect.

4. Once connected, the LED indicator will ﬂash blue slowly.

Note:

If you want to change to couple mode, simply take out the other earbud

from the charging case, they will pair with each other automatically.

Clear Pairing List

If you failed to pair your device with the earbuds, please clear the pairing

history as instructed below:

1. Put the earbuds back into the charging case, close the lid then open it.

2. Press and hold the Reset Button for 10 seconds until the LED indicators on

the earbuds and the charging case ﬂash white three times.

3. If you have paired your device with the earbuds before, remove

"TAOTRONICS SoundLiberty 92" from the Bluetooth device list and

pair again.

4. Re-pair with your Bluetooth® device as instructed in “Pairing” section.

Note:

If you want to pair the earbuds with another device when you have already

paired them with a device, deactivate the Bluetooth function on the paired

device or clear “TAOTRONICS SoundLiberty 92” from its Bluetooth list.

Restore the earbuds to factory settings as instructed above if pairing failed.

09 10

CLEANING AND MAINTENANCE

1. Clean the earbuds and the charging case on a regular basis.

2. Use dry and soft cotton cloth to wipe the unit.

Note: Do not insert anything into the product.

3. Keep away from sharp objects to avoid scratches.

4. Put the unit in a dry and shady place if it is to be idle for a long time.

5. Do not clean the product with detergent or chemicals.

Clear Pairing

List

Refer to the “Clear Pairing

List” section

/

Go into Pairing

Mode

Successfully

paired with

your device

Bluetooth out

of Range /

Failed to pair

with your device

Refer to the “Pairing” section

/

Pairing

Connected

Disconnected

No.

Note: Only when you are wearing the earbuds can you hear the voice prompt.

Problem Solution

Failed to turn on the

earbuds

Earbuds low battery, please charge them

1

Failed to charge the

earbuds

• Place the earbuds into the charging

case properly

• Make sure the charging case is charged fully

2

Can’t charge the

charging case

Make sure the charging cable is intact

and plugged in properly

3

Can’t ﬁnd

“TAOTRONICS

SoundLiberty 92” in the

Bluetooth device list

The earbuds reconnected with previously

paired device automatically:

• Deactivate the Bluetooth function of

previously paired device or clear

“TAOTRONICS SoundLiberty 92” from

its Bluetooth device list, and then

search again

• Put the device to be connected close to

the earbuds

4

Failed to pair the

earbuds with your

device

• Turn on the device and activate its

Bluetooth function before pairing

• Bring the earbuds into pairing mode

as instructed in the “Pairing” section

5

6

No sound in one of the

earbuds in couple

earbuds mode

Place both earbuds back to the charging

case then take them out, they will pair

with each other automatically. If pairing

failed, restore them back to the factory

settings as instructed in the “Clear Pairing

List” section

TROUBLESHOOTING

Turn On / Off

Voice Control

When paired successfully,

tap and hold the Touch

Control on either of the

earbuds for 2 seconds until a

beep is heard

Toot

11 12

7 Poor sound quality

• Wear the earbuds properly and keep

them close to each other.

• Place the connected device close to the

earbuds or remove the obstacles

between them

• Clear the debris on the earbuds

8 Unstable connection

• Keep the earbuds close to your

Bluetooth device

• The effective distance may shorten with

obstacles in the way

• Turn off other Bluetooth devices to

decrease the interference

9

Can’t hear the other party

during a phone call

Set the volume to higher level

10

The other party can’t hear your

voice during a phone call

Free the built-in microphone of any

covers

11

Multifunction Touch

control of the

earbuds is unresponsive

Place the two earbuds into the charging

case and cover the lid, disconnect the

Bluetooth connection. Uncover the lid to

turn on the earbuds and pair again.

WARRANTY AND SERVICE

If any problems occur, please contact the TaoTronics Customer Care Centre in

your country via the contact information listed in this User Guide.

DE

WICHTIGE SICHERHEITSHINWEISE

Bitte lesen Sie sich die Anleitung sorgfältig durch, bevor Sie das Produkt

benutzen, und bewahren Sie sie zur künftigen Bezugnahme gut auf.

Gehörschutz

• Um Gehörschäden zu vermeiden, sollte man Kopfhörer nicht über längere

Zeit bei hoher Lautstärke tragen.

• Regeln Sie die Kopfhörer-Lautstärke herunter, bevor Sie sie aufsetzen, und

erhöhen Sie die Lautstärke dann schrittweise nach Bedarf.

• Sie sollten die Lautstärke nicht zu stark erhöhen, damit Sie Ihre Umgebung

weiterhin wahrnehmen.

• Bitte achten Sie auf lokale Gesetze und Richtlinien, wenn Sie während des

Autofahrens Telefonate über dieses Gerät führen wollen.

• Zu Ihrer eigenen Sicherheit sollten Sie Ablenkungen durch Musik oder

Telefonate beim Fahren oder anderen Aktivitäten, die mögliche Gefahren

bergen, meiden.

Warnung: Bitte stellen Sie die Lautstärke richtig ein, um Gehörschäden zu

vermeiden.

Achtung

• Setzen Sie dieses Produkt keinen hohen Temperaturen aus.

• Tauchen Sie die Kopfhörer nicht unter Wasser und setzen Sie sie nicht über

längere Zeit Feuchtigkeit aus.

• Reinigen Sie das Produkt nicht mit Reinigungsmitteln, die Alkohol,

Ammoniak, Benzol oder Schleifkörper enthalten.

• Lassen Sie das Produkt nicht herunterfallen.

• Legen Sie die Kopfhörer wieder in die Ladehülle, wenn Sie sie nicht

benutzen, und halten Sie sie von Kindern und Haustieren fern, damit sie

nicht verschluckt werden.

• Um Brandgefahr, Garantieausfall und/oder Vermögensschaden zu

vermeiden, sollten Sie dieses Produkt weder auseinanderbauen noch selbst

reparieren.

• Bei Verwendung in der Nähe von Kindern ist Vorsicht geboten.

• Schützen Sie die Ladehülle vor Regen, Wasser und anderen Flüssigkeiten.

• Verwenden Sie dieses Produkt nicht bei Gewitter, damit es nicht zu

Fehlfunktion oder Stromschlägen kommt.

• Suchen Sie bezüglich Reparaturen stets professionelle Techniker oder

autorisiertes Personal auf.

Page is loading ...

EN The Bluetooth

®

word mark and logos are

registered trademarks owned by the Bluetooth SIG, Inc. and

any use of such marks by Sunvalleytek International Inc. is under license.

Other trademarks and trade names are those of their respective owners.

DE Die Marke Bluetooth

®

und das Bluetooth Logo sind eingetragene

Markenzeichen der Bluetooth SIG, Inc. und jegliche Verwendung dieser

Marke durch Sunvalleytek International Inc. ist lizensiert. Die Rechte an

anderen Markenzeichen liegen beim jeweiligen Eigentümer.

FR Le terme et les logos Bluetooth

®

sont la propriété de Bluetooth SIG, Inc.

et toute utilisation de ces marques par Sunvalleytek International Inc. se fait

sous licence. Les autres désignations commerciales et marques mention-

nées sont détenues par leur propriétaire respectif.

ES La marca Bluetooth

®

y los logotipos son de propiedad de Bluetooth SIG,

Inc. y se encuentra autorizado cualquier uso de estas marcas por parte de

Sunvalleytek International Inc. Otras marcas y nombres comerciales son

aquellas de sus respectivos propietarios.

IT La parola e i loghi Bluetooth

®

sono marchi di fabbrica registrati di

proprietà di

Bluetooth SIG, Inc. e qualsiasi utilizzo di questi marchi da parte di

Sunvalleytek

International Inc. avviene su licenza. Gli altri marchi di fabbrica e nomi

commerciali appartengono ai rispettivi proprietari.

JP Bluetooth

®

Bluetooth SIG, Inc.

Sunvalleytek International Inc.

75

Taotronics

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help

Changes or modiﬁcations not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment. This

device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and(2) this device must

accept any interference received, including interference that may cause

undesired operation.

WEEE Compliance

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the

product and its electronic accessories should not be disposed of with other

household waste at the end of their working life. To prevent possible harm to

the environment or human health from uncontrolled waste disposal, please

separate these items from other types of waste and recycle them responsibly

to promote the sustainable reuse of material resources. Household users

should contact either the retailer where they purchased this product, or their

local government ofﬁce, for details of where and how they can take these

items for environmentally safe recycling. Business users should contact their

supplier and check the terms and conditions of the purchase contract. This

product and its electronic accessories should not be mixed with other

commercial wastes for disposal.

www.taotronics.com

Page is loading ...

TaoTronics SoundLiberty 92 User manual

This manual is also suitable for

TaoTronics SoundLiberty 92 User manual

in other languages

Related papers

Other documents