V-ZUG 296 Installation guide

Type
Installation guide

This manual is also suitable for

Installation instructions
Door stop 130° for niche installation
Models 283–286, 296, 954–959
J283.14-3
5.2.10 ITH
4
1. Open the appliance door, unscrew the hexagon socket
screws A and remove both blind covers B.
Leave clamp C in position.
2. Stick foam strips D on the door plate.
3. Insert guide E in support F. 4. Attach support F to appliance door.
The clamp C is wedged under the support.
Fix support with the hexagon socket screw A.
5. Place front support G over guide E and bring appliance door
to the 90° position.
Make sure that the guide enters the opening at the front.
6. Attach support G to the front and fix with the hexagon
socket screw A.
D
B
B
C
A
A
E
F
F
A
C
G
E
G
A
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

V-ZUG 296 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI