Mounting Dream MD5109-KD User manual

Type
User manual
MD5109-KD INSTALLATION INSTRUCTION
If you have any questions, please feel free to contact us:
USA E-mail: customerservice@mountingdream.com
Phone call: (626) 604-9048 (USA) Mon - Fri 10am - 6pm (Pacific Time)
EU E-mail: [email protected]m
AU E-mail: customersupport@mountingdream.com
(A2)
42"~60"
Max:600x400mm/24x16"
Min:200x100mm/8x4"
Für die Installationsanweisungen auf deutsch, Siehe Seite 9~10.
Pour l'instruction en français, veuillez vous reporter à la page 11~12.
Para las instrucciones de la instalación en español, favor vea la página 13~14.
Per le Istruzioni in italiano, vedi pagina 15~16.
TV
1 2
x3
x1
Before getting started, let’s make sure this mount is perfect for you!
1
Is your TV VESA
equal to/greater than
200x100mm/8x4" and
equal to/less than
600x400mm/24x16"?
2
Does your TV
(including accessories)
weigh less than
99 LBS (45 kg)?
3
Installation Tools
(Not Included)
Yes --- Perfect!
No --- This mount is NOT compatible.
MAX:600mm/24"
MAX:
400mm/16"
Yes --- Perfect!
No --- This mount is NOT compatible.
Band Tape
2m
2M2M
4
Safety Caution
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, please feel free to contact Customer Service:
● Incorrect installation may result in product damage or body injury. Mounting Dream shall
bear no responsibility for any damage or injury resulted from incorrect installation,
incorrect assembly or misuse.
● Do not apply this product to any purpose not indicated by Mounting Dream.
Screwdriver
1
USA E-mail: customerservice@mountingdream.com
Phone call: (626) 604-9048 (USA) Mon - Fri 10am - 6pm (Pacific Time)
EU E-mail: customercare@mountingdream.com
AU E-mail: customersupport@mountingdream.com
Parts and Hardware
WARNING:
This product contains small items that could be a choking hazard if
swallowed. Before starting assembly, verify all parts are included and undamaged. For parts
shortage or damage, please contact us via customerservice@mountingdream.com (USA) or
customercare@mountingdream.com (EU) or customersupport@mountingdream.com (AU).
NOTE: Not all hardware included will be used.
M8
M6
M4
1-1 Select TV Screws
TV back
Bracket
Washer
Bracket
Long Screw
Spacer
No, go to PAGE 3 for detailed combination.
Yes, go to PAGE 3 for detailed combination.
TV back
2
1-2 Need Spacer?
Short Screw
Washer
TV Brackets
x2
M4x12mm
M6x12mm
M8x25mm
M4x30mm
M6x35mm
M8x50mm
M6x17mm
M8x22mm
M4
M6
10mm
2.5mm
Washers
Spacers
TV Screws
x4 x4
x4 x4
x4 x4
x4
x4
x4
x4
x8
x4
3
Tips: If you need to combine M8(c/f) screw with 2.5mm spacer(j), you have to remove
the inner circle.
1-3 Attach the TV Brackets
Screw and washer
Spacer(s), screw and washer
No!
Parts and Hardware
4
Allen Key
Bolt M5x8mmBolt M6x10mmBolt M8x30mm
x4 x3 x8 x1 x1
Iron Sheet
Plastic Sleeve Glass
x1x1x1
x5
TV Plate
x1
x2
Foot Pad Lower Column
Upper Column
Assemble the Base Unit
5
Assemble the Upper Column and the TV Plate
Go to Step 3 on PAGE 6.
7
4-1: Height Adjustment
If the TV height is not suitable, you can adjust the height by following the
steps below.
4-2: Swivel Adjustment
8
MAX:600mm
650mm
591mm
691mm
MAX:
400mm
430mm
430mm
262mm
84mm
540mm
25°
25°
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

Mounting Dream MD5109-KD User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI