Whirlpool BSNF 8993 IX Setup and user guide

BSNF 8993 IX
Whirlpool
Brand
Whirlpool
Model
BSNF 8993 IX
Category
Side-by-side fridge-freezers
Type
Setup and user guide

This manual is also suitable for

EN
1
1. Control panel
Refrigerator compartment
2. LED lighting
3. Fan
4. Fan cover and antibacterial lter area
5. Shelves
6. Bottle rack
7. Cheese box + Lid
8. Multi-ow cold air area
9. Sensor cover
10. Active 0° compartment (to keep foods
fresher for longer)
11. Rating plate with commercial name
12. Fruits and vegetables crisper
13. Fridge drawer divider
14. Door reversibility kit
15. Door trays
16. Egg tray
17. Small items half balcony
18. Bottle separator
19. Bottle balcony
20. Door seal
Freezer compartment
20. Door seals
21. Freezer drawers
22. Quick Ice
23. Middle drawer: coolest zone best for
freezing fresh food
24. Freezer drawer divider
25. Shelves
PRODUCT DESCRIPTION
APPLIANCE
1
3
5
6
9
11
12
14
2
21
8
22
10
25
13
7
4
20
17
15
16
18
19
23
24
DAILY REFERENCE
GUIDE
Before using the appliance carefully read the Health and Safety guide.
THANK YOU FOR PURCHASING A
WHIRLPOOL PRODUCT
To receive more comprehensive help and
support, please register your product at
www . whirlpool . eu/ register
WWW
You can download the Safety Instructions
and the Use and Care Guide by visiting our
website http://docs.whirlpool.eu and
following the instructions on the back of
this booklet.
2
CONTROL PANEL
2 3
4
5
6
7
8
9
19
1
10 11 12
16
13
14-15 17 18
1. FRIDGE TEMPERATURE button/indicator
2. FRIDGE TEMPERATURE DISPLAY (°C)
3. VACATION MODE BUTTON
4. FREEZE CONTROL BUTTON
5. FREEZER TEMPERATURE DISPLAY (°C)
6. FREEZER TEMPERATURE button
7. ANTIBACTERIAL AIR FILTER alarm indicator
8. BLACK-OUT ALARM indicator
9. MALFUNCTION ALARM indicator
10. ON/STAND-BY button/indicator
11. FAST COOL button/indicator
12. ACTIVE 0 button/indicator
13. 6TH SENSE FRESH CONTROL indicator
14. CONNECTION STATE indicator
15. CONNECTIVITY button
16. KEY LOCK button/indicator
17. FAST FREEZE button/indicator
18. STOP ALARM button/indicator
19. DOOR OPEN ALARM indicator
This control panel has an innovative technology that will drive you are setting your fridge. When un option or a function is
activated the indicator is fully lit on; when a option is available but not selected is partially lit on.
NOTE: when you are setting temperature or interacting with the control panel, all the buttons are switched on. when you are not
using the control panel, in order to save energy it will show you only the relevant information (the temperature set, the activated
options).
Every time you want to use the control panel and see all the functions, you just need to touch any button to wake up the
panel.
EN
3
FIRST TIME USE
HOW TO START THE APPLIANCE
After plugging in the appliance to the mains, press the On/
Standby button to switch on. The default value settings are
displayed for refrigerator (5 °C) and for Freezer compartment
(-18°C).
After starting the appliance, wait at least 4-6 hours
before placing food into the fridge and into the freezer
compartment.
The default (factory) values of the fridge compartment
settings light-up.
ACCESSORIES
CONNECTIVITY PRE-REQUISITE
When the refrigerator is connected to Internet,You can always
monitor and operate remotely the appliance. To use this
feature You need to own:
– a smart phone running Android 4.3 (or higher) with a
1280x720 (or higher) screen or a tablet or a smart phone
running iOS 8 (or higher);
– a wireless router 2.4Ghz WiFi b/g/n connected to internet
(verify with your smart device that the signal strength
of your home wireless network close to the appliance is
good).
– Important in order to use App, You have to :
– Check if the room in which your smart appliance is
installed is covered by the signal of your home wireless
network.
– Own a IOS device (Ipad/Iphone) or Android
(Smartphone)
– Download the free “Live” app from the reference App
store or Google play of your smart device and install it on
your device.
– Subscribe (legal terms) to the service to be able to
benet of the features provided through the app.
– Register your refrigerator and connect it
to your home
wireless network.
Find detailed information on connectivity setup in the App or
in the Use & Care guide.
EGG TRAY CHEESE BOX BOTTLE RACK
BOTTLE SEPARATOR FREEZER DRAWER DIVIDER FRIDGE DRAWER DIVIDER
QUICK ICE COMPARTMENT
EUTETICS/QUICK ICE TRAYS
4
DAILY USE
FUNCTIONS
See Use and Care Guide for more details on functions / see last
page for information on how to obtain the Use and Care Guide
ON/STANDBY
To put the product in Stand-by, press and hold the On/
Stand By button for 3 seconds. All the indicators turn o
except On/Standby button.
Press again to reactivate the appliance.
TEMPERATURE SETTING
FRIDGE TEMPERATURE
To adjust the Fridge Temperature, press the Fridge °C button
. The Fridge Temperature can be adjusted between +2°C
and + 8°C, as shown by the Fridge Temperature Display (°C).
FREEZER TEMPERATURE
To adjust the Freezer Temperature, press the Freezer °C button
. The Freezer Temperature can be adjusted between -16°C
and -24°C, as shown by the Freezer Temperature Display (°C).
VACATION MODE
This function can be activated to reduce the energy
consumption of the appliance during a prolonged period of
time. To activate/deactivate press and hold for 3 seconds the
Vacation mode button. When the function is enabled, the
related symbol will light up.
Changing the temperature setpoint will automatically
deactivate the function.
The freezer compartment works properly.
KEY LOCK
To lock/unlock the keys of the Control Panel, press the Key
Lock button for 3 seconds: the Key Lock indicator will be
displayed for a short time and an acoustical signal will be
played.
SMART DISPLAY
This optional function can be used to save energy. When
activated, only 6th sense fresh control logo is lit on, other
buttons and the displays are switched o to minimize the
consumption.
To activate/deactivate smart display press together
temperature buttons of fridge and freezer by 3 seconds.
Remember that this function does not disconnect the
appliance from the power supply, but only reduce the power
consumed by external display
Every time you want to use the control panel and see all the
functions, you just need to touch any button to wake up the
panel.
FREEZE CONTROL
Freeze Control is an advanced technology that reduces
temperature uctuations in the whole freezer compartment
to minimum, thanks to an innovative air system, totally
independent from the fridge. Freeze burns are reduced up to
60% and food preserves its original quality and color.
To activate/deactivate the Freeze Control press the FREEZE
CONTROL button (icon)
.
The function works properly in a dened range of
temperature: between ‐22°C and ‐24°C. In case of Fast
freezing is engaged, the function “Freeze control” is inhibited
until the Fast Freezing function switched o.
6TH SENSE FRESH CONTROL
This function automatically works to ensure the optimal
conditions to preserve the stored food. If there are any
variations, 6th Sense Fresh Control immediately restores the
ideal conditions. Results are outstanding: freshness preserved
at best throughout the fridge cavity up to 4 times longer.
FAST COOL
Using Fast Cool function it is possible to increase the cooling
in the refrigerator compartment. The use of this function is
recommended when placing a very high quantity of food
in the refrigerator compartment. Press the Fast Cool button
to activate Fast Cool function. When activated, the Fast Cool
indicator will turn on. The function is automatically disabled
after 6 hours, or can be manually disabled by pressing Fast
Cool button.
FAST FREEZE
The use of this function is recommended when placing
a very high quantity of food to be frozen in the freezer
compartment. 24 hours before freezing fresh food, press the
Freezer button to activate the Fast Freeze function. When
activated, the Fast Freeze indicator turns on. After 24 hours
place the food to be frozen in the middle freezing zone of
freezer compartment. The function is automatically disabled
after 48 hours, or can be manually disabled by pressing Fast
Freeze button.
EN
5
ACTIVE 0 COMPARTMENT
The Active 0 compartment is specically designed to maintain
a low temperature and a suitable humidity level, in order to
keep foods fresher for longer (e.g. meat, sh, cold cuts ).
Activating and deactivating the compartment
To activate/deactivate the Active 0 compartment, press the
dedicated button on the control panel.
FAN + ANTIBACTERIAL AIR FILTER
The Fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food.
If the appliance has the Fan it can be equipped with the
antibacterial lter.
Remove it from the box placed in the crisper drawer and
insert into the fan cover.
The replacement procedure is included in the
lter box.
The air lter symbol is lit on to indicates that it
is expired and need to be replaced. The lter
expires in 6 months. The User Interface gives
a visual feedback, without acoustic alarm. On
text display show message “Replace air lter”. After replaced
the lter, press Stop Alarm button to reset message on the
text display/antibacterial air lter indicator.
REMOTE CONTROL
If Your refrigerator is connected to Internet, it allows
You to operate and monitor the appliance remotely
using a smart device.
To enable Remote Control:
• Make sure router is ON
• Press connectivity button for 3 seconds until a single
tone is emitted
. At this point the connectivity
symbol is blinking WPS icon switch ON to indicate that
theprocedure has started.
• Press WPS button on Your router
• WPS indicator switch ON on user panel inform about the
connection status. WPS timeout has a duration of 2’30”.
• After successfully completed process WPS icon switch
OFF,connectivity button solid ON.
• The refrigerator is now in Remote Control mode and is
ready to be operatedvia App.
• The installation procedure need to be performed one
time.
• If the router hasn't WPS button there is an alternative way
to connect the appliance with home wireless net see User
& Care.
Use the Whirpool App to control the appliance by remote , so
You can :
– check your fridge and activate options also when you are
out of home
– manage of food inventory and shopping list, receiving
notication about food
– expiring - access additional functions as for instance the
smart party mode
– optimize energy consumptions leveraging the best
energy tari
– access further information on best use of your fridge and
suggestions for best preservation
– receive feedback about fridge status in case of alarms
While using Smart control of appliance all keys on user
interface are enable.
For more information about provisioning process follow the
app instructions or see the User Care Guide.
QUICK IDENTIFICATION OF CONNECTION STATE
ON APPLIANCE’S
Connection button state
Connection descriptions
blinks fast
Appliance searching
connection to router
blinks slowly
Appliance is connected
with router but it is not
able to connect server (for
example ADSL not working)
ON solid
Appliance is connected to
server and server recognize
the appliance
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses
LEDs light, allowing a better lightning as well as a very low
energy consumption.
If the LED light system does not work, please contact the
Service to replace it.
Important: The refrigerator compartment light switches
on when the refrigerator door is opened. If the door is kept
open for more then 10 minutes the light will be automatically
switched o.
FAN + ANTIBACTERIAL FILTER
The Fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food.
If the appliance has the Fan it can be equipped with the
antibacterial lter.
Remove it from the box placed in the crisper drawer and
insert into the fan cover.
The replacement procedure is included in the lter box.
6
QUICK ICE
HOW TO MAKE ICE CUBES
Put the empty ice cube trays into the freezer 24 hours before
using the Quick Ice feature to cool them down. To achieve the
best performance of the Quick Ice trays it is recommended
to keep them permanently in the freezer and maintain
temperature setting at -18°C or colder.
Remove a Quick Ice tray by pulling it towards you.
Remove the cover and ll the tray with potable water
(maximum level = 2/3 of the overall capacity of the tray).
Insert the cover back into the tray and insert it back into the
dedicated slots in the top freezer drawer.
Take care not to spill water.
Wait at least 30 minutes until the ice cubes are formed (this
time can be slightly longer if the trays are used immediately after
the rst use).
EN
7
ALARM TABLE
ALARM TYPE Signal Cause Cure
Door open
alarm
The acoustical alarm is activated
and the Alarm Indicator
blinks.
The Fridge or Freezer door has
remained open for more than 2
minutes.
Close the door or press the Stop Alarm
to mute the acoustical alarm.
Temperature
alarm
The freezer Temperature display
blinks (°C) and the Alarm
Indicator remains on.
The inside temperature is not
adequate
Press the Stop Alarm button
; the acoustical alarm stops, the
Temperature Display (°C) blinks and
the Alarm Indicator
remains on
until a temperature < -10°C is reached.
Antibacterial air
lter alarm
The Antibacterial lter alarm
indicator lit on
Finished the validity of
Antibacterial air lter.
Replace the Antibacterial air lter,
press the Alarm button to reset it.
Long black-out
alarm
The Black Out Alarm icon
remains on, the Alarm indicator
blinks and the Temperature
display (°C) blinks, showing the
maximum temperature reached
during blackout.
Prolonged power failure, able
to cause the inside temperature
to increase to 0°C.
Press the Stop Alarm button
; the
acoustical alarm stops.
Malfunction The letter “F” blinks on the display
(°C).
Product malfunction. Contact the After-sales Service.
SOME OF THE FUNCTIONAL SOUNDS
YOU MIGHT HEAR
A hissing sound when switching on the
appliance for the rst time or after a long
pause.
A gurgling sound when refrigerant uid
enters into the pipes.
BRRR sound is from the compressor
running.
Buzzing sound when water valve or fan
start working.
A cracking sound when compressor
starts.
The CLICK is from the thermostat which
adjusts how often the compressor is
running.
8
HOW TO STORE FOOD
AND BEVERAGE
Legend
TEMPERATE ZONE
Suggested for the storage of tropical fruit,
cans, drinks, eggs, sauces, pickles, butter,
jam
COOL ZONE
Suggested for storage of cheese, milk, dairy
food, delicatessen, yogurt
COOLEST ZONE
Suggested for the storage of sh, meat, cold
cuts. When Active 0° function is deactivated,
this drawer can be used to store also other
type of food, as well as winter fruit, dessert.
FRUIT & VEGETABLE DRAWER
FREEZING ZONE DRAWER
(MAX COOL ZONE) Suggested to freeze
fresh/cooked food.
FREEZER DRAWERS
Note: The Grey tone of the legend doesn’t
match with the color of drawers
FRIDGE COMPARTMENT
Use recyclable plastic, metal, aluminum
and glass containers and cling lm to
wrap foods.
Always use closed containers for liquids
and for food that may give o or be
tainted by odor or avor transfer or
cover them.
If you have a little quantity of food to
store in the refrigerator, we recommend
to use the shelves above the crisper for
fruits and vegetables since this is the
coolest area of the compartment.
Foods which give o a large amount
ethylene gas and those that are
sensitive to this gas, such as fruit,
vegetables and salad, should always
be separated or wrapped so as not to
reduce the storage life; for example do
not store tomatoes together with kiwi
fruits or cabbage.
To avoid bottles falling over, you can
use the bottle holder (available on
selected models).
Do not store food too close together to
enable sucient air circulation.
FREEZER COMPARTMENT
The freezer is the ideal storage location
for store frozen food, make ice cubes
and freeze fresh food in the freezer
compartment.
The maximum number of kilograms
of fresh food that can be frozen within
a 24-hour period is indicated on the
rating plate (…kg/24h).
If you have a little quantity of food to
store in the freezer, we recommend to
use the coldest areas of your freezer
compartment, corresponding to the
middle area.
011
400010872835
Printed in Italy
PRODUCT FICHE
WWW
The product fiche with energy data of this
appliance can be downloaded from Whirlpool website
http : / / docs . whirlpool . eu
HOW TO OBTAIN THE USE AND CARE GUIDE
>
WWW
Download the Use and Care Guide
from our website http://docs.whirlpool.eu
(you can use this QR Code), specifying the
product’s commercial code.
> Alternatively, contact our Client After-sales
Service.
CONTACTING OUR AFTERSALES SERVICE
You can find our contact details in the
warranty manual. When contacting our
Client After-sales Service, please state
the codes provided on your product's
identification plate.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Whirlpool BSNF 8993 IX Setup and user guide

BSNF 8993 IX
Whirlpool
Brand
Whirlpool
Model
BSNF 8993 IX
Category
Side-by-side fridge-freezers
Type
Setup and user guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents