AL-KO KHS 8552 User manual

462706_l BA KHS 3704 / KHS 5204 / KHS 8852

Deckblatt

BETRIEBSANLEITUNG

HOLZSPALTER

KHS 3704

KHS 5204

KHS 8552

462706_l

11 | 2017

DE

GB

NL

FR

ES

IT

SI

HR

HU

DK

SE

NO

FI

PL

CZ

SK

RU

RO

DE

2 KHS 3704 | KHS 5204 | KHS 8552

Inhaltsverzeichnis

Deutsch ....................................................................................................................................................6

English....................................................................................................................................................27

Nederlands .............................................................................................................................................45

Français..................................................................................................................................................67

Español ..................................................................................................................................................89

Italiano..................................................................................................................................................110

Slovenščina ..........................................................................................................................................131

Hrvatski.................................................................................................................................................150

Magyarul...............................................................................................................................................168

Dansk ...................................................................................................................................................187

Svensk..................................................................................................................................................205

Norsk ....................................................................................................................................................222

Suomi ...................................................................................................................................................240

Polski....................................................................................................................................................258

Česky ...................................................................................................................................................280

Slovenská.............................................................................................................................................298

Pусский ................................................................................................................................................318

Român..................................................................................................................................................343

AL-KO KOBER GROUP Kötz, Germany

This documentation or excerpts therefrom may not be reproduced or disclosed to third parties without

the express permission of the AL-KO KOBER GROUP.

Page is loading ...

462706_l 27

Translation of the original instructions for use

TRANSLATION OF THE ORIGINAL INSTRUCTIONS FOR USE

Contents

1 About these operating instructions ................................................................................................. 29

1.1 Legends and signal words.....................................................................................................29

2 Product description ......................................................................................................................... 29

2.1 Designated use .....................................................................................................................29

2.2 Possible foreseeable misuse.................................................................................................29

2.3 Safety and protective devices ...............................................................................................30

2.3.1 Motor protection switch ...........................................................................................30

2.3.2 Mains cable .............................................................................................................30

2.4 Electrical requirements..........................................................................................................30

2.5 Product overview...................................................................................................................31

2.6 Symbols on the appliance .....................................................................................................31

3 Safety instructions .......................................................................................................................... 32

3.1 Operator ................................................................................................................................32

3.2 Personal protective equipment..............................................................................................32

3.3 Safety in the workplace .........................................................................................................32

3.4 Safety of persons, animals and property...............................................................................33

3.5 Appliance safety .................................................................................................................... 33

3.6 Electrical safety .....................................................................................................................33

3.7 Use and handling of the electrical tool ..................................................................................34

3.8 Safety instructions relating to operation ................................................................................35

4 Assembly (01)................................................................................................................................. 36

4.1 Mounting the transport wheels (02).......................................................................................36

4.2 Mounting the feet (KHS 5200) (03 – 06) ...............................................................................36

5 Start-up ........................................................................................................................................... 36

5.1 Before each use ....................................................................................................................37

5.2 Putting the log splitter into operation (07, 08)........................................................................37

6 Operation (13)................................................................................................................................. 38

6.1 Splitting a log (08, 12) ...........................................................................................................39

6.2 Removing a jammed log (09) ................................................................................................39

7 Working behaviour and working technique..................................................................................... 39

8 Maintenance and care .................................................................................................................... 40

8.1 Maintenance and care work ..................................................................................................40

8.2 Maintenance tasks ................................................................................................................40

8.2.1 Sharpening of the splitting wedge ...........................................................................40

8.2.2 Checking and topping up hydraulic oil(10, 11) .......................................................40

9 Help in case of malfunction............................................................................................................. 42

10 Transport ........................................................................................................................................ 43

11 Storage ........................................................................................................................................... 43

GB

28 KHS 3704 | KHS 5204 | KHS 8552

Translation of the original instructions for use

12 Disposal .......................................................................................................................................... 43

13 After-Sales / Service ....................................................................................................................... 44

14 Guarantee....................................................................................................................................... 44

15 EU declaration of conformity........................................................................................................... 44

462706_l 29

About these operating instructions

1 ABOUT THESE OPERATING

INSTRUCTIONS

■

The German version is the original operating

instructions. All additional language versions

are translations of the original operating

instructions.

■

It is essential to carefully read through these

operating instructions before start-up. This is

essential for safe working and trouble-free

handling.

■

Always safeguard these operating

instructions so that they can be consulted if

you need any information about the

appliance.

■

Only pass on the appliance to other persons

together with these operating instructions.

■

Comply with the safety and warning

information in these operating instructions.

1.1 Legends and signal words

DANGER!

Denotes an imminently

dangerous situation which

will result in fatal or serious

injury if not avoided.

WARNING!

Denotes a potentially

dangerous situation which

can result in fatal or

serious injury if not

avoided.

CAUTION!

Denotes a potentially

dangerous situation which

can result in minor or

moderate injury if not

avoided.

IMPORTANT!

Denotes a situation which

can result in material

damage if not avoided.

NOTE

Special instructions for ease of

understanding and handling.

2 PRODUCT DESCRIPTION

2.1 Designated use

The log splitter is intended exclusively for splitting

perpendicularly cut and well-dried logs. The

dimensions of the logs must not exceed the

dimensions given in the technical data.

Only one person may remain in the working area

of the log splitter, and the log splitter may be

operated only by one person.

This appliance is intended solely for use in non-

commercial applications. Any other use (as well

as unauthorised conversions or add-ons) are

regarded as contrary to the intended use and will

result in exclusion of the warranty as well as loss

of conformity (CE mark); the manufacturer will

thus decline any responsibility for damage and/or

injury suffered by the user or third parties.

2.2 Possible foreseeable misuse

■

Splitting of logs in which metal parts such as

nails, wire, staples, etc. are embedded if

forbidden.

■

Operation in a potentially explosive

atmosphere is forbidden.

■

Use for any other purpose that the

designated use is forbidden.

GB

30 KHS 3704 | KHS 5204 | KHS 8552

Product description

2.3 Safety and protective devices

WARNING!

Risk of injury

Defective and disabled

safety and protective

devices can lead to

serious injury.

■

Have any defective

safety and protective

devices repaired.

■

Never disable safety

and protective devices.

2.3.1 Motor protection switch

The motor protection switch switches off the

motor if the log splitter is overloaded.

Do not deactivate the function of the motor

protection switch.

If the motor protection switch has switched off the

log splitter, proceed as follows:

1. Disconnect the log splitter from the mains.

2. Determine the cause of the overload.

3. Allow the log splitter to cool down for several

minutes, then connect to the mains again.

4. Switch on the log splitter.

2.3.2 Mains cable

WARNING!

Risk of injury from

electric shock

A defective mains cable

can result in serious

injuries due to electric

shock.

■

Ensure that the mains

cable is not damaged or

severed.

■

Use only rubber-sheathed cables of quality

H07RN-F according to VDE 0282 Part 14

with a conductor cross section of at least

2.5mm².

■

The maximum permissible cable length is

10m. A longer cable impairs the motor power

and hence the performance and function of

the log splitter.

■

Mains cable, mains plug and coupling socket

must be undamaged. A defective mains

cable (e.g. with cracks, cuts, crushed or

kinked points in the insulation) must not be

used.

■

Repairs to the mains cable, mains plug and

coupling socket may only to be carried out by

qualified electricians.

■

Do not expose plug connectors to moisture.

■

If the mains cable is damaged, immediately

disconnect it from the mains.

2.4 Electrical requirements

■

AC 230V / 50Hz

■

Minimum cross-section of the mains cable =

2.5mm²

■

Minimum fusing of the mains connection =

16A

462706_l 31

Product description

2.5 Product overview

1 Guard plate 8 Control lever

2 Log pusher 9 Feet, rear (KHS5204 and KHS8552 only)

3 Log guide pipe 10 Support foot (KHS5204 and KHS8552 only)

4 Splitting wedge 11 Transport wheels park position (KHS5204 and

KHS8552 only)

5 Piston rod 12 Feet, front (KHS5204 and KHS8552 only)

6 Transport bracket 13

Cross-strut, front (KHS5204 and KHS8552 only)

7 On/Off switch on the electric motor

2.6 Symbols on the appliance

Symbol Meaning

Read the operating instructions

before starting operation!

Keep third parties away from the

danger area!

Important – danger!

Keep your hands away from the

splitting wedge!

Disconnect the appliance from

the mains before starting

maintenance work!

Wear protective gloves!

Symbol Meaning

Wear safety boots!

Wear protective glasses!

Operate the appliance with both

hands.

GB

32 KHS 3704 | KHS 5204 | KHS 8552

Safety instructions

3 SAFETY INSTRUCTIONS

DANGER!

Lack of knowledge of the

safety instructions can

pose a danger of

extremely severe or even

fatal injury.

Lack of knowledge of the

safety instructions and

operating instructions can

lead to extremely serious

and even fatal injury.

■

Observe all safety

instructions and

instructions for use in

these operating

instructions as well the

operating instructions

which are referred to

before you start using

the appliance.

■

Keep all supplied

documents in a safe

place for future

reference.

3.1 Operator

■

Young people under 16 years

of age and people who do not

know the operating

instructions are not allowed to

use the appliance. Observe

any country-specific safety

regulations concerning the

minimum age of the user.

■

Do not operate the appliance

if you are under the influence

of alcohol, drugs or

medication.

3.2 Personal protective

equipment

■

Wear clothing and protective

equipment in accordance with

the regulations in order to

avoid injury to the head and

limbs as well as to avoid

hearing impairment.

■

The clothing must be

appropriate (tightly fitting) and

must not restrict movements.

If you have long hair, it is

essential to wear a hair net.

Never wear loose items of

clothing or accessories that

be pulled into the appliance,

e.g. scarves, loose-fitting

shirts, long neck chains.

■

The personal protective

equipment comprises:

■

Hearing protection and

protective eyewear

■

Long trousers and sturdy

shoes

■

Protective gloves

3.3 Safety in the workplace

■

Work only in daylight or under

very bright artificial light.

462706_l 33

Safety instructions

■

Operate the appliance only on

solid and level ground and not

on sharp inclines.

■

Pay attention to stability.

3.4 Safety of persons,

animals and property

■

Note that the user is

responsible for accidents and

damage that may befall other

persons or their property.

■

Use the appliance only for the

purposes for which it is

intended. Any non-intended

use can lead to injury and

property damage.

■

Switch on the appliance only

when there are no other

persons or animals in the

working area.

■

Maintain a safe distance to

persons or animals, or switch

off the appliance if persons or

animals approach.

3.5 Appliance safety

■

Use the appliance only under

the following conditions:

■

The appliance is not soiled.

■

The appliance show no

signs of damage.

■

All controls function

properly.

■

Do not overload the device. It

is intended for light work in

the private sector. Overload

can lead to damage to the

appliance.

■

Never operate the appliance

with worn or defective parts.

Always replace defective

parts with original spare parts

from the manufacturer. If the

appliance is operated with

worn or defective parts,

guarantee claims against the

manufacturer are excluded.

NOTE

Repair work is only

allowed to be carried out

by expert workshops or

our AL-KO service centres.

3.6 Electrical safety

■

The connection plug of the

power tool must fit into the

socket. The plug is not

allowed to be changed in

any way. Do not use any

plug adapters together with

earthed power tools.

Unmodified plugs and

matching sockets reduce the

risk of electric shock.

■

Avoid physical contact with

earthed surfaces such as

on pipes, heaters, cookers

GB

34 KHS 3704 | KHS 5204 | KHS 8552

Safety instructions

and refrigerators. There is

an increased risk of electric

shock if your body is earthed.

■

Keep electrical tools out of

the rain and away from

moisture. Water getting into

an electrical tool increases the

risk of an electric shock.

■

Do not use the connection

cable for incorrect

purposes such as carrying

the electrical tool, hanging

it up or for pulling the plug

out of the socket. Keep the

connection cable away from

heat, oil, sharp edges and

moving parts. Damaged or

tangled connection cables

increase the risk of electric

shock.

■

If you are working outside

with a power tool, only use

extension cables that are

also suitable for outside.

Using an extension cable that

is suitable for outside

decreases the risk of electric

shock.

■

If the operation of the power

tool in a humid environment

cannot be avoided, use a

fault current circuit breaker.

Using a fault current circuit

breaker decreases the risk of

electric shock.

3.7 Use and handling of the

electrical tool

■

Do not overload the power

tool. Use the appropriate

power tool for the job you

are doing. Using the

appropriate power tool will

enable you to work more

effectively and safely in the

specified performance range.

■

Do not use a power tool if it

has a defective switch. A

power tool that can no longer

be switched on or off is

dangerous and must be

repaired.

■

Disconnect the plug from

the socket and/or remove

the battery before you make

adjustments to the

appliance, replace parts or

put the power tool away.

This precautionary measure

will prevent the power tool

from starting inadvertently.

■

Keep unused power tools

out of the reach of children.

Do not allow people to use

the power tool if they are

not familiar with it or have

not read these instructions.

Power tools are dangerous if

they are used by

inexperienced people.

462706_l 35

Safety instructions

■

Look after power tools and

the insertion tool with care.

Check whether moving

parts function perfectly and

do not stick, whether there

are any broken parts or

parts that are damaged in

such a way that the function

of the power tool is

impaired. Have damaged

parts repaired before using

the power tool. Many

accidents are caused by

failure to maintain power tools

properly.

■

Keep cutting tools sharp

and clean. Carefully

maintained cutting tools with

sharper cutting edges are less

likely to stick and are easier to

control.

■

Use power tools,

accessories, insertion tools,

etc. according to these

instructions. When doing

so, take account of the

working conditions and the

activity to be undertaken.

Using power tools for

applications other than the

intended purpose can result in

dangerous situations.

■

Keep the grips and grip

surfaces dry, clean and free

from oil and grease. Slippery

grips and grip surfaces

prevent safe operation and

control of the power tool in

unforeseen situations.

3.8 Safety instructions

relating to operation

■

Never leave the operational

appliance unsupervised.

■

Clean the appliance after

every use.

■

Protect the appliance against

unauthorised access.

■

The appliance may only be

operated by one person.

■

Never move the appliance

while the motor is running.

■

Never operate the appliance

in rain or snow.

■

Disconnect the appliance from

the mains for:

■

Maintenance and cleaning

work

■

Adjustment work

■

Transport

■

Interruptions in work

■

Faults

■

Do not touch the splitting

wedge.

GB

36 KHS 3704 | KHS 5204 | KHS 8552

Assembly (01)

4 ASSEMBLY (01)

WARNING!

Danger if assembly is

not carried out

completely!

Operation of an

incompletely assembled

appliance can result in

serious injury.

■

Only operate the

appliance when it is fully

assembled.

■

Check that all safety

and protective devices

are in place and

functioning correctly

before switching on.

NOTE

The tools required for assembly are not

included in the scope of supply.

Required tool: See Figure 01.

4.1 Mounting the transport wheels (02)

Insert the axis (02/1)through the wheel from

outside and through the pipe and secure with the

cotter pin (02/2).

4.2 Mounting the feet (KHS 5200) (03 – 06)

NOTE

The transport wheels are only intended

for transporting the log splitter.

The transport wheels must be

dismounted from the feet and mounted

in the park position.

1. Mount the transport wheels on both front feet.

2. Tilt the log splitter to one side and mount the

rear foot.

3. Insert the foot (03/1, 05/1) into the pipe frame

(03/2, 05/2) up to the stop and screw tight

with screws, washers and locking nuts (03/3,

05/3).

4. Ask a second person to help tilt the log

splitter to the other side, mount the remaining

feet and then position the log splitter.

5. Position the log splitter vertically (piston rod

upwards) and screw the support foot (04/1) to

the rear feet.

6. Position the log splitter and mount the front

cross-strut (06/1) using the threaded rod

(06/2).

5 START-UP

WARNING!

Danger of injury if the

appliance tips over

A tipping appliance can

result in serious injury and

damage to the appliance.

■

Ensure that the

appliance cannot tip

over.

WARNING!

Danger of injury from

faulty appliance

Operation of an faulty

appliance can result in

serious injury and damage

to the appliance.

■

Operate the appliance

only when it is

undamaged and has not

defects, and when no

parts are missing or

loose.

462706_l 37

Start-up

DANGER!

Risk of electric shock if

the log splitter is

operated without

residual current circuit

breaker

Operation of the appliance

without residual current

circuit breaker in the mains

connection can result in

serious injuries or even

death due to electric

shock.

■

Before connecting the

appliance, check

whether the mains

connection has a

residual current circuit

breaker for a maximum

leakage current of

0.03A.

■

If you cannot be sure

that a residual current

circuit breaker is

installed: Use an

additional portable

residual current device

with switched PE

conductor.

5.1 Before each use

WARNING!

Danger of injury if the

appliance tips over

A tipping appliance can

result in serious injury and

damage to the appliance.

■

Ensure that the

appliance cannot tip

over.

1. Carry out a visual inspection of the log

splitter.

■

The log splitter must not be put into

operation if parts of the appliance are

missing, defective or loose.

2. Carry out a visual inspection of the mains

cable.

■

A defective mains cable (e.g. with cracks,

cuts, crushed or kinked points in the

insulation) must not be used.

3. Carry out a visual inspection for leaks in the

hydraulic system.

■

The log splitter must not be put into

operation if the hydraulic system has

leaks.

4. Use suitable means to fix the appliance

securely to the ground.

5.2 Putting the log splitter into operation

(07, 08)

NOTE

The transport wheels are only intended

for transporting the log splitter.

The transport wheels must be

dismounted from the feet and mounted

in the park position.

1. Install the log splitter on level, solid ground, if

possible with a slight slope towards the

control lever (as the valves are located here).

If the log splitter slopes towards the splitting

wedge, the splitting force will be lost.

2. Lay the mains cable in such a way that it

cannot be kinked, crushed or damaged in

any other way.

GB

38 KHS 3704 | KHS 5204 | KHS 8552

Operation (13)

3. Connect the mains cable to the mains power

supply.

4. Loosen vent plug (07/1) by 3–4 turns.

Note:Tighten the vent plug again after use.

5. Testing the safety stop:

■

With one hand, press and hold the ON

button (08/1) of the electric motor.

■

When the motor has reached its

operating speed, press control lever

(08/2) completely down with your other

hand.

■

Release one of the two controls: ON

button or control lever. The log pusher

must stop immediately.

■

Release the other control. The log pusher

moves back to its starting position.

6 OPERATION (13)

WARNING!

Risk of injury if operated

by more than one person

Operation of the appliance

by two or more persons

can result in serious

injuries.

■

Operate the appliance

only alone.

■

Keep other persons

away and in particular

prevent them from

reaching into the log

that is currently being

split.

WARNING!

Risk of injury from

shattering log

Stored hardwood, irregular

branches, irregular logs

and logs with a large

number of knots tend to

shatter during splitting.

Flying pieces of wood can

then cause serious

injuries.

■

Split only straight logs

with a perpendicular

and straight cutting

surface.

■

Wear the prescribed

protective clothing at all

times.

IMPORTANT!

Damage due to incorrect

use

The appliance can be

damaged or destroyed.

■

Always place the log

longitudinally and never

transversely into the log

splitter.

■

Never try to force a log to

split by maintaining the

hydraulic pressure.

When using the appliance, remain in the

operating area (13) only.

462706_l 39

Working behaviour and working technique

6.1 Splitting a log (08, 12)

WARNING!

Danger of injury outside

of the operating area

If you are outside of the

operating area when

splitting wood, there is a

danger of serious injuries.

■

When splitting logs,

remain in the operating

area of the log splitter

only.

■

Do not reach into the

piece of wood that is

being split.

CAUTION!

Risk of injury due to

untidy workplace

Untidiness and logs lying

around pose a risk of

tripping and slipping in the

working area.

■

Store the logs to be split

in a tidy pile.

■

Immediately remove

split logs and wood

chips from the working

area.

1. Place the log longitudinally onto the log

splitter in such a way that the log is held by

the log guide pipes.

Note:Only place straight logs with a

perpendicular and straight cutting surface on

the log splitter (12).

2. With one hand, press and hold the ON button

(08/1) of the electric motor.

3. When the motor has reached its operating

speed, press control lever (08/2) completely

down with your other hand.

■

The log pusher pushes the log against

the splitting wedge. The log is split.

4. When the ON button and control lever are

released, the log pusher moves back into its

starting position.

6.2 Removing a jammed log (09)

CAUTION!

Risk of injury from a

jammed log flying out

If a jammed log flies out of

the appliance, injuries can

be caused and the

appliance may be

damaged.

■

Never try to free a

jammed log using tools.

1. Take both hands away from the ON button

and control lever.

2. Allow the log pusher to come to a complete

standstill.

3. Push a wooden wedge (09/1) under the

jammed log.

4. Drive the wooden wedge completely under

the jammed log using the log pusher.

5. If necessary, repeat with a larger wooden

wedge until the log is freed.

7 WORKING BEHAVIOUR AND

WORKING TECHNIQUE

■

Always split only well-dried logs. These can

be split far easier than fresh, moist wood.

■

Very thick logs can be split more easily if they

are not too long.

GB

40 KHS 3704 | KHS 5204 | KHS 8552

Maintenance and care

8 MAINTENANCE AND CARE

WARNING!

Risk of injury during

maintenance work

Improper maintenance can

result in serious injury and

damage to the appliance.

■

Disconnect the

appliance from the

mains before starting

maintenance work.

■

Have repairs to the

appliance carried out

only by qualified

companies.

8.1 Maintenance and care work

Cleaning of the guideway

1. Clean the guideway of the log pusher at

regular intervals, particularly when splitting

logs with high resin contents.

8.2 Maintenance tasks

8.2.1 Sharpening of the splitting wedge

1. Sharpen the splitting wedge, when

necessary, using a suitable file.

8.2.2 Checking and topping up hydraulic

oil(10, 11)

Check the oil level every day and change the

hydraulic oil after 1year or 150operating hours.

Use only hydraulic oil HLP46 for topping up and

changing.

WARNING!

Danger of injury due to

tipping

A vertically erected,

horizontal log splitter can

tip very easily. This can

cause serious injuries and

damage to property.

■

Always have two

persons to turn the

appliance upright.

■

Always hold an upright

appliance or secure it to

prevent it from tipping

over.

IMPORTANT!

Risk of appliance

damage from use of

wrong hydraulic oil

Use of the wrong hydraulic

oil and oil levels that are

too high or too low result in

malfunctions and heat

development and can

damage the hydraulic

pump.

■

Use only the prescribed

hydraulic oil.

■

Check the hydraulic oil

level at regular intervals

and top up, when

necessary.

Use only hydraulic oil of the viscosity class HLP

46.

462706_l 41

Maintenance and care

NOTE

Always check the hydraulic oil level with

the log pusher retracted.

1. Tilt the log splitter over the wheels, position

upright and hold securely during the whole

process.

2. Unscrew the oil dipstick (10/1) and wipe

using a clean, lint-free cloth.

3. Insert the dipstick up to the stop and pull out

again.

■

The oil level must be between the marks

"min." and "max." (10). If necessary, top

up hydraulic oil (11/2) using a funnel

(11/1).

4. Check seal (10/2) for damage and replace if

necessary.

5. Screw in the oil dipstick again and tighten

only slightly to avoid damaging the thread of

the cylinder cover.

NOTE

An oil change is not necessary.

GB

42 KHS 3704 | KHS 5204 | KHS 8552

Help in case of malfunction

9 HELP IN CASE OF MALFUNCTION

In the event of malfunctions, switch off the log splitter and remove the mains plug. Faults that cannot be

remedied following the table below must be remedied by an authorised specialist company.

Malfunction Cause Remedy

Log pusher does not extend/

retract

Insufficient hydraulic oil Top up hydraulic oil

Hydraulic pump defective Have hydraulic pump replaced

by a specialist company or by

an AL-KO service centre

Appliance is tilted towards the

splitting wedge

Position the appliance level or

tilted towards the control lever

Log pusher has no force Insufficient hydraulic oil Top up hydraulic oil

Appliance is tilted towards the

splitting wedge

Position the appliance level or

tilted towards the control lever

Hydraulic pump whistles, log

pusher moves jerkily

Insufficient hydraulic oil Top up hydraulic oil

Appliance is tilted towards the

splitting wedge

Position the appliance level or

tilted towards the control lever

Air in circuit Loosen vent plug

Motor becomes very hot Cable cross-section of an

extension lead too small

Use an extension lead with a

larger cable cross-section

Motor does not start Motor protection switch has

switched off

Wait until the motor has cooled

down

Mains plug or plug socket

defective

Have inspected and replaced, if

necessary, by a qualified

electrician

Mains cable defective Have inspected and replaced, if

necessary, by a qualified

electrician

Electric motor defective Have inspected and replaced, if

necessary, by a qualified

electrician

462706_l 43

Transport

10 TRANSPORT

IMPORTANT!

Risk of damage from

improper transport

If the transport is not

carried out properly, the

log splitter can be

damaged.

■

Always remove the

mains plug and tighten

the vent plug before

moving the log splitter.

■

Lift the log splitter only

at the transport bracket.

■

Do not lift the log splitter

at the cylinder

mounting, piston rod or

other components.

1. Lift the log splitter at the transport bracket

and transport by pushing or pulling.

11 STORAGE

1. Disconnect the log splitter from the mains.

2. Thoroughly clean the appliance after each

use and – if present – attach all covers. The

log pusher must be in the end position.

3. Store the appliance in a dry, lockable place

out of the reach of children.

12 DISPOSAL

Information on the German Electrical and

Electronic Equipment Act (ElectroG)

■

Electrical and electronic appliances do

not belong in household waste, but

should be collected and disposed of

separately.

■

Used batteries or rechargeable

batteries that are not installed

permanently in the old appliance must

be removed before disposal. Their

disposal is regulated by the battery

law.

■

Owners or users of electrical and

electronic appliances are obliged by

law to return them after use.

■

The end user bears personal

responsibility for deleting his personal

data from the old appliance to be

disposed of.

The symbol of the crossed-through rubbish bin

means that electrical and electronic appliances

may not be disposed of in the household rubbish.

Electrical and electronic appliances can be

handed in at no charge at the following places:

■

Public service disposal or collection points

(e.g. municipal building yards)

■

Points of sale of electrical appliances

(stationary and online) provided traders are

obliged to take them back or offer this

voluntarily.

These statements only apply to appliances that

are installed and sold in the countries of the

European Union and are subject to European

Directive 2012/19/EU. Different provisions may

apply to the disposal of electrical and electronic

appliances in countries outside the European

Union.

GB

44 KHS 3704 | KHS 5204 | KHS 8552

After-Sales / Service

13 AFTER-SALES / SERVICE

In the event of questions of warranty, repair or spare parts, please contact your nearest AL-KOService

Centre.

These can be found on the Internet at:

www.al-ko.com/service-contacts

14 GUARANTEE

We will resolve any material or manufacturing faults on the appliance during the legal warranty period

for claims relating to faults, in accordance with our choice either to repair or replace. The legal warranty

period is determined by the legislation of the country in which the appliance was purchased.

Our warranty promise applies only if:

■

These operating instructions are heeded

■

The appliance is handled correctly

■

Original spare parts have been used

The warranty becomes void in the case of:

■

Unauthorised repair attempts

■

Unauthorised technical modifications

■

Non-intended use

The guarantee excludes:

■

Paint damage that can be attributed to normal wear and tear

■

Wear parts that are marked with a frame

xxxxxx (x)

on the spare parts card

The guarantee period commences with purchase by the first end user. The date on the proof of

purchase is decisive. In the event of a guarantee claim, please take this guarantee declaration and the

original proof of purchase, and contact your dealer or the nearest authorised customer service centre.

This statement does not affect the purchaser's statutory claims for defects against the vendor.

15 EU DECLARATION OF CONFORMITY

We hereby declare that this product in its marketed form conforms to the requirements of the

harmonised EU Directives, EU safety standards and the product-specific standards.

Product

Log splitter

Serial number

G4064065

Manufacturer

AL-KO Geräte GmbH

Ichenhauser Str. 14

D-89359 Kötz

Germany

Duly authorised person for

technical file

Andreas Hedrich

Ichenhauser Str. 14

D-89359 Kötz

Germany

Type

KHS 3704

KHS 5204

KHS 8552

EU directives

2006/42/EC

2014/30/EU

2011/65/EU

Harmonised standards

EN 60335-1

EN 60204-1

EN 60204-1/A1

EN ISO 12100

EN 61000-3-2

EN 61000-3-11

EN 609-1

Kötz, 11/10/2017

Wolfgang Hergeth

Managing Director

Page is loading ...

AL-KO KHS 8552, KHS 3704 Horizontal Electric Wood Splitter, KHS 5204, KHS 5204 Electric User manual

Related papers

Other documents