SEM 1125PCD Operating instructions

Category
Paper shredders
Type
Operating instructions

This manual is also suitable for

Security Engineered Machinery Co., Inc
OPERATIONAL & MAINTENANCE MANUAL
SEM Model 1125P/CD Shredder
REV: 0
Security Engineered Machinery Co., Inc
NATIONWIDE SERVICE
Phone Toll Free 1(800)225-9293
Fax: (508)366-6814
Website: WWW.SEMSHRED.com
For NATIONWIDE SERVICE CALL 1(800)225-9293
2
***IMPORTANT SAFETY PROCEDURES***
Your new paper shredder incorporates powerful, heavy duty cutting mechanisms, serious and permanent
injury may result if proper precautions are not followed.
1. This equipment should never be operated by children or individuals that are untrained
or incapable of understanding these safety precautions!
2. Do not reach into the feed opening for any reason! Never insert fingers, hands, other
extremities, or objects not meant to be shredded into the feed opening!
3. Do not operate or come in close proximity to this equipment wearing long hair,
necktie, loose clothing, or jewelry which may activate a photoelectric on/off switch
and/or be pulled into the shredder.
4. Maintenance or repair of this equipment should be performed only be trained,
authorized service personnel.
5. Always disconnect electrical power (unplug) before removing or opening the cover or
other panels providing access to internal mechanisms.
SPECIFICATIONS
Shred Size 1/8” X 1”
Sheet Capacity *Up to 7 Sheets per Pass
Feed Opening 8.75” for paper /505” for CD’s, Credit Cards
Dimensions 13.5”H x 8.75”W x 21”D
Weight 32 lbs.
*Results may vary depending on power source, operator/proper maintenance and paper type.
For NATIONWIDE SERVICE CALL 1(800)225-9293
3
Table of Contents
READ CAREFULLY BEFORE USING
Proper care of your new paper shredder will ensure many years of trouble free operation, with minimum of
maintenance or repair.
IMPORTANT: Please note that all packaging should be retained by the customer for (30) days from the
time of receipt. In the event that this unit needs to be sent back for replacement or repair this packaging will
be required to do so. Should the packaging have been discarded before the (30) day requested period,
packaging costs will be incurred by the customer.
Contents Page No.
Safety Procedures…………………………………………………………………………………………..2
Table of Contents…………………………………………………………………………………………..3
Safety Precautions………………………………………………………………………………………..4-5
Installation and Set-up………….…………………………………………………………………..............6
Operation and Feeding …………………………………………………………………………….….....7-8
Maintenance and Cleaning…………………………………………………………………………………9
Troubleshooting.…………………………………..…………………………………………………...10-13
Accessories..............……………………………………………………………………………………….14
Technical Information……………………………………………………………………………………..15
Parts Breakdown……………………………………………………………………………………….16-21
Customer Service
Security Engineered Machinery Co., Inc.
PO Box 1045
5 Walkup Drive
Westboro, MA 01581
Tel: 800-225-9293 Fax: 508-366-6814
Website: www.semshred.com
Order On-line:
GSA Customers: www.fedshred.com
Commercial Customers: www.semshred.com
IMPORTANT
Two to three preventive maintenance calls per year are recommended
Only authorized SEM service personnel should be allowed to service the shredder.
For NATIONWIDE SERVICE CALL 1(800)225-9293
4
SAFETY PRECAUTIONS
Remove the plug before cleaning the machine!
Do not perform any repairs on document shredder
Ensure free access to mains.
For NATIONWIDE SERVICE CALL 1(800)225-9293
5
SAFETY PRECAUTIONS Cont…
When not in use for a longer time switch off.
Do not operate the machine without the
safety flap (A)
For NATIONWIDE SERVICE CALL 1(800)225-9293
6
INSTALLATION
Place machine onto the shred bin or cabinet
Plug into the wall socket
For NATIONWIDE SERVICE CALL 1(800)225-9293
7
OPERATION
Turn the main switch to position”I”. The green
control light will light (1) ready for operation. Starts
automatically when paper, CD/DVD or credit cards are
inserted (2). Stops automatically when no further paper,
CD/DVD or credit cards are inserted.
Stops automatically if too much paper is inserted
(Machine Jams)
For NATIONWIDE SERVICE CALL 1(800)225-9293
8
OPERATION Cont…
Press reverse button (1) and remove paper (2). Reset by
pressing the rocker switch to position “I” (3). Re-feed the
paper in smaller quantities (4).
CD/DVD:
Should CD/DVD cause a jam when being destroyed, press
the reverse button “R”.
Empty the shred bin when it is full. (Level can be seen
in the window (A). Remove and empty the shred bin for
CD/DVD.
For NATIONWIDE SERVICE CALL 1(800)225-9293
9
MAINTENANCE AND CLEANING
If the sheet capacity reduces or after the shred
bin is emptied oil the shredding mechanism (see picture).
From time to time clean the output area of the cutting head.
Disconnect from mains
Remove paper debris with a brush
(DANGER OF INJURY)
For NATIONWIDE SERVICE CALL 1(800)225-9293
10
TROUBLESHOOTING
Machine will not start.
Is the machine plugged in?
For NATIONWIDE SERVICE CALL 1(800)225-9293
11
TROUBLESHOOTING Cont..
Is machine placed correctly on the shred bin or cabinet? (A)
Is shred bin is pushed in?
Is the switch in position ”I”? Green LED lamp lights up?
(1) Insert paper (2)
For NATIONWIDE SERVICE CALL 1(800)225-9293
12
TROUBLESHOOTING Cont..
Feed paper into the center of the feed opening? (Photo Cell)
Machine will not stop.
Remove plug from main, clean the photo cell (A)
with a small brush.
Machine stops.
Overload protection. Cooling down period
approximately 10-15 minutes.
For NATIONWIDE SERVICE CALL 1(800)225-9293
13
TROUBLESHOOTING Cont..
Empty the shred bins in sufficient time, at least
daily, so that no interference is caused to the
cutting heads.
If a paper jam, as described on page 7 cannot
be corrected, because of an over filled shred bin,
the shred bin must be emptied.(See page 8)
None of the above mentioned methods helped to
solve the problem Contact our Customer Service at
1(800)225-9293
For NATIONWIDE SERVICE CALL 1(800)225-9293
14
RECOMMANDED ACCESSORIES
Environmentally Friendly Oil
Part #
For NATIONWIDE SERVICE CALL 1(800)225-9293
15
TECHNICAL INFORMATION
This machine is approved by independent safety
laboratories and is in compliance with the EC regulations
2006-95-EG and 2004-108-EG.
Sound Level Information:
The sound level at the work place is less than the ISO
7779 standard’s maximum permissible level of <70 db (A)
The exact technical specifications can be found on the
technical specifications sticker on the machine.
To claim under guarantee, the machine must still carry its
original identification label.
Subject to alterations without notice.
For NATIONWIDE SERVICE CALL 1(800)225-9293
16
PARTS BREAKDOWN
For NATIONWIDE SERVICE CALL 1(800)225-9293
17
PARTS BREAKDOWN Cont….
For NATIONWIDE SERVICE CALL 1(800)225-9293
18
PARTS BREAKDOWN Cont….
For NATIONWIDE SERVICE CALL 1(800)225-9293
19
PARTS BREAKDOWN Cont….
For NATIONWIDE SERVICE CALL 1(800)225-9293
20
CONNECTING DIAGRAM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

SEM 1125PCD Operating instructions

Category
Paper shredders
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI