SEM 1125P Operating instructions

Security Engineered Machinery Co., Inc

OPERATIONAL & MAINTENANCE MANUAL

SEM Model 1125P/CD Shredder

REV: 0

Security Engineered Machinery Co., Inc

NATIONWIDE SERVICE

Phone Toll Free 1(800)225-9293

Email: [email protected]

Fax: (508)366-6814

Website: WWW.SEMSHRED.com

For NATIONWIDE SERVICE CALL 1(800)225-9293

2

***IMPORTANT SAFETY PROCEDURES***

Your new paper shredder incorporates powerful, heavy duty cutting mechanisms, serious and permanent

injury may result if proper precautions are not followed.

1. This equipment should never be operated by children or individuals that are untrained

or incapable of understanding these safety precautions!

2. Do not reach into the feed opening for any reason! Never insert fingers, hands, other

extremities, or objects not meant to be shredded into the feed opening!

3. Do not operate or come in close proximity to this equipment wearing long hair,

necktie, loose clothing, or jewelry which may activate a photoelectric on/off switch

and/or be pulled into the shredder.

4. Maintenance or repair of this equipment should be performed only be trained,

authorized service personnel.

5. Always disconnect electrical power (unplug) before removing or opening the cover or

other panels providing access to internal mechanisms.

SPECIFICATIONS

Shred Size 1/8” X 1”

Sheet Capacity *Up to 7 Sheets per Pass

Feed Opening 8.75” for paper /505” for CD’s, Credit Cards

Dimensions 13.5”H x 8.75”W x 21”D

Weight 32 lbs.

*Results may vary depending on power source, operator/proper maintenance and paper type.

For NATIONWIDE SERVICE CALL 1(800)225-9293

3

Table of Contents

READ CAREFULLY BEFORE USING

Proper care of your new paper shredder will ensure many years of trouble free operation, with minimum of

maintenance or repair.

IMPORTANT: Please note that all packaging should be retained by the customer for (30) days from the

time of receipt. In the event that this unit needs to be sent back for replacement or repair this packaging will

be required to do so. Should the packaging have been discarded before the (30) day requested period,

packaging costs will be incurred by the customer.

Contents Page No.

Safety Procedures…………………………………………………………………………………………..2

Table of Contents…………………………………………………………………………………………..3

Safety Precautions………………………………………………………………………………………..4-5

Installation and Set-up………….…………………………………………………………………..............6

Operation and Feeding …………………………………………………………………………….….....7-8

Maintenance and Cleaning…………………………………………………………………………………9

Troubleshooting.…………………………………..…………………………………………………...10-13

Accessories..............……………………………………………………………………………………….14

Technical Information……………………………………………………………………………………..15

Parts Breakdown……………………………………………………………………………………….16-21

Customer Service

Security Engineered Machinery Co., Inc.

PO Box 1045

5 Walkup Drive

Westboro, MA 01581

Tel: 800-225-9293 Fax: 508-366-6814

Website: www.semshred.com

E-mail: [email protected]

Order On-line:

GSA Customers: www.fedshred.com

Commercial Customers: www.semshred.com

IMPORTANT

Two to three preventive maintenance calls per year are recommended

Only authorized SEM service personnel should be allowed to service the shredder.

For NATIONWIDE SERVICE CALL 1(800)225-9293

4

SAFETY PRECAUTIONS

Remove the plug before cleaning the machine!

Do not perform any repairs on document shredder

Ensure free access to mains.

For NATIONWIDE SERVICE CALL 1(800)225-9293

5

SAFETY PRECAUTIONS Cont…

When not in use for a longer time switch off.

Do not operate the machine without the

safety flap (A)

For NATIONWIDE SERVICE CALL 1(800)225-9293

6

INSTALLATION

Place machine onto the shred bin or cabinet

Plug into the wall socket

For NATIONWIDE SERVICE CALL 1(800)225-9293

7

OPERATION

Turn the main switch to position”I”. The green

control light will light (1) ready for operation. Starts

automatically when paper, CD/DVD or credit cards are

inserted (2). Stops automatically when no further paper,

CD/DVD or credit cards are inserted.

Stops automatically if too much paper is inserted

(Machine Jams)

For NATIONWIDE SERVICE CALL 1(800)225-9293

8

OPERATION Cont…

Press reverse button (1) and remove paper (2). Reset by

pressing the rocker switch to position “I” (3). Re-feed the

paper in smaller quantities (4).

CD/DVD:

Should CD/DVD cause a jam when being destroyed, press

the reverse button “R”.

Empty the shred bin when it is full. (Level can be seen

in the window (A). Remove and empty the shred bin for

CD/DVD.

For NATIONWIDE SERVICE CALL 1(800)225-9293

9

MAINTENANCE AND CLEANING

If the sheet capacity reduces or after the shred

bin is emptied oil the shredding mechanism (see picture).

From time to time clean the output area of the cutting head.

• Disconnect from mains

• Remove paper debris with a brush

(DANGER OF INJURY)

For NATIONWIDE SERVICE CALL 1(800)225-9293

10

TROUBLESHOOTING

Machine will not start.

Is the machine plugged in?

For NATIONWIDE SERVICE CALL 1(800)225-9293

11

TROUBLESHOOTING Cont..

Is machine placed correctly on the shred bin or cabinet? (A)

Is shred bin is pushed in?

Is the switch in position ”I”? Green LED lamp lights up?

(1) Insert paper (2)

For NATIONWIDE SERVICE CALL 1(800)225-9293

12

TROUBLESHOOTING Cont..

Feed paper into the center of the feed opening? (Photo Cell)

Machine will not stop.

Remove plug from main, clean the photo cell (A)

with a small brush.

Machine stops.

Overload protection. Cooling down period

approximately 10-15 minutes.

For NATIONWIDE SERVICE CALL 1(800)225-9293

13

TROUBLESHOOTING Cont..

Empty the shred bins in sufficient time, at least

daily, so that no interference is caused to the

cutting heads.

If a paper jam, as described on page 7 cannot

be corrected, because of an over filled shred bin,

the shred bin must be emptied.(See page 8)

None of the above mentioned methods helped to

solve the problem Contact our Customer Service at

1(800)225-9293

For NATIONWIDE SERVICE CALL 1(800)225-9293

14

RECOMMANDED ACCESSORIES

Environmentally Friendly Oil

Part #

For NATIONWIDE SERVICE CALL 1(800)225-9293

15

TECHNICAL INFORMATION

This machine is approved by independent safety

laboratories and is in compliance with the EC regulations

2006-95-EG and 2004-108-EG.

Sound Level Information:

The sound level at the work place is less than the ISO

7779 standard’s maximum permissible level of <70 db (A)

The exact technical specifications can be found on the

technical specifications sticker on the machine.

To claim under guarantee, the machine must still carry its

original identification label.

Subject to alterations without notice.

For NATIONWIDE SERVICE CALL 1(800)225-9293

16

PARTS BREAKDOWN

For NATIONWIDE SERVICE CALL 1(800)225-9293

17

PARTS BREAKDOWN Cont….

For NATIONWIDE SERVICE CALL 1(800)225-9293

18

PARTS BREAKDOWN Cont….

For NATIONWIDE SERVICE CALL 1(800)225-9293

19

PARTS BREAKDOWN Cont….

For NATIONWIDE SERVICE CALL 1(800)225-9293

20

CONNECTING DIAGRAM

Page is loading ...

SEM 1125P Operating instructions

This manual is also suitable for

SEM 1125P Operating instructions

Related papers

Other documents