Juniper EX4200 Series Mounting instructions

EX4200 Series
Juniper
Brand
Juniper
Model
EX4200 Series
Type
Mounting instructions

This manual is also suitable for

Juniper EX4200 Series is a family of high-performance, fixed-configuration Gigabit Ethernet switches designed for enterprise campus and data center networks. It offers a wide range of features including:

  • High-density 10 Gigabit Ethernet connectivity: The EX4200 Series provides up to 48 ports of 10 Gigabit Ethernet connectivity in a compact 1U form factor, making it ideal for high-bandwidth applications such as server virtualization, cloud computing, and storage networking.

  • Advanced Layer 2 and Layer 3 features: The EX4200 Series supports a comprehensive set of Layer 2 and Layer 3 features, including VLANs, routing, multicast, and quality of service (QoS), providing flexible and scalable network connectivity.

Juniper EX4200 Series is a family of high-performance, fixed-configuration Gigabit Ethernet switches designed for enterprise campus and data center networks. It offers a wide range of features including:

  • High-density 10 Gigabit Ethernet connectivity: The EX4200 Series provides up to 48 ports of 10 Gigabit Ethernet connectivity in a compact 1U form factor, making it ideal for high-bandwidth applications such as server virtualization, cloud computing, and storage networking.

  • Advanced Layer 2 and Layer 3 features: The EX4200 Series supports a comprehensive set of Layer 2 and Layer 3 features, including VLANs, routing, multicast, and quality of service (QoS), providing flexible and scalable network connectivity.

Mounting an EX 3200 or EX 4200 Switch on a Rack or Cabinet
You can mount an EX 3200 or EX 4200 switch on a 19-in. or 23-in. equipment rack
or cabinet by using mounting brackets. EX 3200 and EX 4200 switches are shipped
with mounting brackets and mounting screws to be used to secure the mounting
brackets to the chassis.
NOTE: If you are mounting multiple switches on a rack or cabinet, mount a switch
in the bottom of the rack or cabinet first and proceed to mount the rest of the switches
from bottom to top.
CAUTION: One person must be available to lift the switch while another secures the
switch to the rack or cabinet.
Before mounting an EX 3200 or EX 4200 switch on a rack or cabinet:
■ Verify that the site meets the requirements described in Site Preparation Checklist
for EX 3200 and EX 4200 Switches.
■ Place the rack or cabinet in its permanent location, allowing adequate clearance
for airflow and maintenance, and secure it to the building structure.
■ Read General Safety Guidelines and Warnings for EX-series Switches, with
particular attention to Chassis Lifting Guidelines for EX 3200 and EX 4200
Switches.
■ Remove the switch from the shipping carton (see Unpacking an EX 3200 or EX
4200 Switch).
■ Attach mounting brackets to the switch chassis. See Attaching Rack-Mounting
Brackets to an EX 3200 or EX 4200 Switch.
Ensure that you have the following parts and tools available to mount an EX 3200
or EX 4200 switch on a rack or cabinet:
■ Phillips (+) screwdriver, number 2
■ Screws to secure the chassis to the rack or cabinet (not provided)
■ Dust covers for ports (for EX 4200-24F switches only; optional)
To mount an EX 3200 or EX 4200 switch on a rack or cabinet (see
Figure 1 on page 2):
1. Have one person grasp both sides of the switch, lift the switch, and position it
in the rack or cabinet, aligning the mounting bracket holes with the threaded
holes in the rack or cabinet rail. Align the bottom hole in both the mounting
brackets with a hole in each rack or cabinet rail, making sure the chassis is level.
2. Have a second person secure the switch to the rack or cabinet rail by using
appropriate screws. Use the Phillips (+) screwdriver, number 2 to tighten the
screws.
Mounting an EX 3200 or EX 4200 Switch on a Rack or Cabinet ■ 1
3. Verify that all the screws on one side of the rack or cabinet are aligned with the
screws on the other side and that the switch chassis is level.
4. If it is an EX 4200-24F switch, we recommend you insert dust covers in unused
SFP ports.
Figure 1: Mounting an EX 3200 or EX 4200 Switch on a Rack
Related Topics ■ Connecting AC Power to an EX 3200 or EX 4200 Switch
■ Connecting DC Power to an EX 3200 or EX 4200 Switch
■ Connecting and Configuring an EX-series Switch (CLI Procedure)
■ Connecting and Configuring an EX-series Switch (J-Web Procedure)
■ Rack Requirements for EX 3200 and EX 4200 Switches
■ Cabinet Requirements for EX 3200 and EX 4200 Switches
■ Clearance Requirements for Airflow and Hardware Maintenance for EX 3200
and EX 4200 Switches
2 ■ Mounting an EX 3200 or EX 4200 Switch on a Rack or Cabinet
  • Page 1 1
  • Page 2 2

Juniper EX4200 Series Mounting instructions

EX4200 Series
Juniper
Brand
Juniper
Model
EX4200 Series
Type
Mounting instructions
This manual is also suitable for

Juniper EX4200 Series is a family of high-performance, fixed-configuration Gigabit Ethernet switches designed for enterprise campus and data center networks. It offers a wide range of features including:

  • High-density 10 Gigabit Ethernet connectivity: The EX4200 Series provides up to 48 ports of 10 Gigabit Ethernet connectivity in a compact 1U form factor, making it ideal for high-bandwidth applications such as server virtualization, cloud computing, and storage networking.

  • Advanced Layer 2 and Layer 3 features: The EX4200 Series supports a comprehensive set of Layer 2 and Layer 3 features, including VLANs, routing, multicast, and quality of service (QoS), providing flexible and scalable network connectivity.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents